Publications by Joydeep Dutta
Peer reviewed
Articles
[1]
R. Feng et al., "Microstructural engineering of high-entropy Prussian blue analogues for capacitive deionization of saline water," Nano Energy, vol. 133, 2025.
[2]
A. M. Abiso et al., "Advances in copper-based catalysts for sustainable hydrogen production via methanol steam reforming," Chemical Engineering Journal Advances, vol. 19, 2024.
[3]
D. Yu et al., "Antifouling activity of PEGylated chitosan coatings: Impacts of the side chain length and encapsulated ZnO/Ag nanoparticles," International Journal of Biological Macromolecules, vol. 281, 2024.
[4]
D. Yu et al., "Chitosan-photocatalyst nanocomposite on polyethylene films as antimicrobial coating for food packaging," Progress in organic coatings, vol. 186, 2024.
[5]
E. A. Toledo-Carrillo et al., "Co-complexes on modified graphite surface for steady green hydrogen production from water at neutral pH," Frontiers in Chemistry, vol. 12, 2024.
[6]
E. A. Toledo-Carrillo et al., "Decoupled supercapacitive electrolyzer for membrane-free water splitting," Science Advances, vol. 10, no. 10, pp. 3180, 2024.
[7]
B. Das et al., "Eugenol and Aloe vera blended natural wax-based coating for preserving postharvest quality of Kaji lemon (Citrus jambhiri)," Food Chemistry: X, vol. 22, 2024.
[8]
J. Nordstrand, K. Laxman and J. Dutta, "Long-term durability of commercial capacitive deionization modules," Desalination, vol. 576, 2024.
[9]
M. Y. Suleiman et al., "Performance of zero-valent iron immobilized on activated carbon cloth for the removal of phenol from wastewater," Environmental Sciences Europe, vol. 36, no. 1, 2024.
[10]
B. Das et al., "Bifunctional and regenerable molecular electrode for water electrolysis at neutral pH," Journal of Materials Chemistry A, vol. 11, no. 25, pp. 13331-13340, 2023.
[11]
M. I. Alvarado Ávila et al., "Cellulose as sacrificial agents for enhanced photoactivated hydrogen production," Sustainable Energy & Fuels, vol. 7, no. 8, pp. 1981-1991, 2023.
[12]
D. Yu et al., "Chitosan modified with bio-extract as an antibacterial coating with UV filtering feature," International Journal of Biological Macromolecules, vol. 230, 2023.
[13]
S. Kumar et al., "Current progress in valorization of food processing waste and by-products for pectin extraction," International Journal of Biological Macromolecules, vol. 239, 2023.
[14]
J. Nordstrand and J. Dutta, "Faster bipolar capacitive deionization with flow-through electrodes," Electrochimica Acta, vol. 467, 2023.
[15]
J. Nordstrand, L. Zuili and J. Dutta, "Fully 3D Modeling of Electrochemical Deionization," ACS Omega, vol. 8, no. 2, pp. 2607-2617, 2023.
[16]
R. Al-Soubaihi et al., "Investigation of palladium catalysts in mesoporous silica support for CO oxidation and CO2 adsorption," Heliyon, vol. 9, no. 7, 2023.
[17]
R. Al-Soubaihi, K. M. Saoud and J. Dutta, "Low-temperature CO oxidation by silver nanoparticles in silica aerogel mesoreactors," Chemical Engineering Journal, vol. 455, pp. 140576, 2023.
[18]
W. Wang et al., "Photothermal performance of three chromia-forming refractory alloys for high-temperature solar absorber applications," Applied Thermal Engineering, vol. 225, 2023.
[19]
J. Nordstrand and J. Dutta, "Potential-driven mechanisms for raising the intercalation selectivity 100-fold in multi-ion removal from water," Desalination, vol. 565, 2023.
[20]
X. Zhang et al., "Self-sacrificial growth of hierarchical P(Ni, Co, Fe) for enhanced asymmetric supercapacitors and oxygen evolution reactions," Electrochimica Acta, vol. 438, 2023.
[21]
J. Nordstrand, E. A. Toledo-Carrillo and J. Dutta, "Tuning the Cation/Anion Adsorption Balance with a Multi-Electrode Capacitive-Deionization Process," Journal of the Electrochemical Society, vol. 170, no. 2, pp. 023502, 2023.
[22]
J. Nordstrand and J. Dutta, "A new automated model brings stability to finite‐element simulations of capacitive deionization," Nano Select, vol. 3, no. 6, pp. 1021-1035, 2022.
[23]
M. I. Alvarado Ávila, E. A. Toledo-Carrillo and J. Dutta, "Cerium Oxide on a Fluorinated Carbon-Based Electrode as a Promising Catalyst for Hypochlorite Production," ACS Omega, vol. 7, no. 42, pp. 37465-37475, 2022.
[24]
I. B. Basumatary et al., "Chitosan-based active coating for pineapple preservation : Evaluation of antimicrobial efficacy and shelf-life extension," Lebensmittel-Wissenschaft + Technologie, vol. 168, pp. 113940, 2022.
[25]
B. Das et al., "Cobalt Electrocatalyst on Fluorine Doped Carbon Cloth – a Robust and Partially Regenerable Anode for Water Oxidation," ChemCatChem, vol. 14, no. 18, 2022.
[26]
R. Al-Soubaihi, K. M. Saoud and J. Dutta, "Comparative investigation of structure and operating parameters on the performance and reaction dynamic of CO conversion on silica aerogel and fumed-silica-supported Pd catalysts," SURFACES AND INTERFACES, vol. 29, pp. 101776, 2022.
[27]
J. Nordstrand and J. Dutta, "ELC: Software and tutorial for finite-element modeling of electrochemical desalination," SoftwareX, vol. 20, 2022.
[28]
V. Piazza et al., "Ecosafety Screening of Photo-Fenton Process for the Degradation of Microplastics in Water," Frontiers in Marine Science, vol. 8, 2022.
[29]
X. Zhang et al., "Effect of Surface Charge on the Fabrication of Hierarchical Mn-Based Prussian Blue Analogue for Capacitive Desalination," ACS Applied Materials and Interfaces, vol. 14, no. 35, pp. 40371-40381, 2022.
[30]
H. Hussain et al., "Freestanding Activated Carbon Nanocomposite Electrodes for Capacitive Deionization of Water," Polymers, vol. 14, no. 14, 2022.
[31]
J. Nordstrand et al., "Ladder Mechanisms of Ion Transport in Prussian Blue Analogues," ACS Applied Materials and Interfaces, vol. 14, no. 1, pp. 1102-1113, 2022.
[32]
J. Nordstrand and J. Dutta, "Langmuir-Based Modeling Produces Steady Two-Dimensional Simulations of Capacitive Deionization via Relaxed Adsorption-Flow Coupling," Langmuir, vol. 38, no. 11, pp. 3350-3359, 2022.
[33]
V. Ciobanu et al., "Large-Sized Nanocrystalline Ultrathin β-Ga2 O3 Membranes Fabricated by Surface Charge Lithography," Nanomaterials, vol. 12, no. 4, 2022.
[34]
J. Nordstrand et al., "Predicting capacitive deionization processes using an electrolytic-capacitor (ELC) model : 2D dynamics, leakages, and multi-ion solutions," Desalination, vol. 525, 2022.
[35]
M. Raji et al., "Prediction of heterogeneous Fenton process in treatment of melanoidin-containing wastewater using data-based models," Journal of Environmental Management, vol. 307, 2022.
[36]
W. Hamd et al., "Recent Advances in Photocatalytic Removal of Microplastics : Mechanisms, Kinetic Degradation, and Reactor Design," Frontiers in Marine Science, vol. 9, 2022.
[37]
L. Li et al., "Ruthenium containing molecular electrocatalyst on glassy carbon for electrochemical water splitting," Dalton Transactions, vol. 51, no. 20, pp. 7957-7965, 2022.
[38]
J. Nordstrand et al., "Sodium to cesium ions: a general ladder mechanism of ion diffusion in prussian blue analogs," Physical Chemistry, Chemical Physics - PCCP, vol. 24, no. 20, pp. 12374-12382, 2022.
[39]
R. N. Mutafela et al., "Sustainable extraction of hazardous metals from crystal glass waste using biodegradable chelating agents," Journal of Material Cycles and Waste Management, vol. 24, no. 2, pp. 692-701, 2022.
[40]
J. Nordstrand and J. Dutta, "Theory of bipolar connections in capacitive deionization and principles of structural design," Electrochimica Acta, vol. 430, pp. 141066, 2022.
[41]
M. Batvandi et al., "Visible-light-driven photocatalysis with Z-scheme Ag3PO4@N-GQDs@g-C3N4 nano/hetero-junctions," Applied Physics A : Materials Science & Processing, vol. 128, no. 10, 2022.
[42]
K. Swargiary et al., "ZnO Nanorods Coated Single-Mode-Multimode-Single-Mode Optical Fiber Sensor for VOC Biomarker Detection," Sensors, vol. 22, no. 16, 2022.
[43]
W. Wang et al., "A New High-Temperature Durable Absorber Material Solution through a Spinel-Type High Solar Absorptivity Coating on Ti2AlC MAX Phase Material," ACS Applied Materials and Interfaces, vol. 13, no. 37, pp. 45008-45017, 2021.
[44]
J. Nordstrand and J. Dutta, "An Extended Randles Circuit and a Systematic Model-Development Approach for Capacitive Deionization," Journal of the Electrochemical Society, vol. 168, no. 1, 2021.
[45]
R. M. Al Soubaihi et al., "CO Oxidation Efficiency and Hysteresis Behavior over Mesoporous Pd/SiO2 Catalyst," Catalysts, vol. 11, no. 1, 2021.
[46]
S. Kumar et al., "Chitosan Nanocomposite Coatings Containing Chemically Resistant ZnO-SnOx Core-shell Nanoparticles for Photocatalytic Antifouling," International Journal of Molecular Sciences, vol. 22, no. 9, 2021.
[47]
I. B. Basumatary et al., "Chitosan-based antimicrobial coating for improving postharvest shelf life of pineapple," Coatings, vol. 11, no. 11, 2021.
[48]
O. O. Fasanya et al., "Effects of synthesis methods on performance of CuZn/MCM-41 catalysts in methanol steam reforming," International journal of hydrogen energy, vol. 46, no. 5, pp. 3539-3553, 2021.
[49]
R. N. Mutafela et al., "Efficient and low-energy mechanochemical extraction of lead from dumped crystal glass waste," Environmental Chemistry Letters, vol. 19, no. 2, pp. 1879-1885, 2021.
[50]
K. Habib et al., "Electrochemical parameters of aluminum oxide film in situ during anodization of aluminum by white light-optical interferometry," Optical Review, vol. 28, no. 1, pp. 18-26, 2021.
[51]
J. Nordstrand and J. Dutta, "Flexible Modeling and Control of Capacitive-deionization Processes through a Linear-state-space Dynamic-Langmuir Model," npj Clean Water, vol. 4, no. 5, pp. 1-7, 2021.
[52]
Z. Zohdijamil et al., "Functionalized graphene oxide tablets for sample preparation of drugs in biological fluids : Extraction of ritonavir, a HIV protease inhibitor, from human saliva and plasma using LC–MS/MS," BMC Biomedical chromotography, vol. 35, no. 12, 2021.
[53]
I. Plesco et al., "Highly Porous and Ultra-Lightweight Aero-Ga2O3 : Enhancement of Photocatalytic Activity by Noble Metals," Materials, vol. 14, no. 8, 2021.
[54]
A. Haghighatzadeh et al., "Hollow ZnO microspheres self-assembled from rod-like nanostructures : morphology-dependent linear and Kerr-type nonlinear optical properties," Journal of materials science. Materials in electronics, vol. 32, no. 18, pp. 23385-23398, 2021.
[55]
M. Ebrahimzadeh, A. Haghighatzadeh and J. Dutta, "Improved third-order optical nonlinearities in Ag/MoS2 Schottky-type nano/hetero-junctions?," Optics and Laser Technology, vol. 140, 2021.
[56]
M. Raji et al., "Nano zero-valent iron on activated carbon cloth support as Fenton-like catalyst for efficient color and COD removal from melanoidin wastewater," Chemosphere, vol. 263, 2021.
[57]
S. Kumar et al., "Nanocoating Is a New Way for Biofouling Prevention," Frontiers in Nanotechnology, vol. 3, 2021.
[58]
W. Wang et al., "Solar selective reflector materials: Another option for enhancing the efficiency of the high-temperature solar receivers/reactors," Solar Energy Materials and Solar Cells, vol. 224, 2021.
[59]
A. Uheida et al., "Visible light photocatalytic degradation of polypropylene microplastics in a continuous water flow system," Journal of Hazardous Materials, vol. 406, 2021.
[60]
X. Zhang and J. Dutta, "X-Fe (X = Mn, Co, Cu) Prussian Blue Analogue-Modified Carbon Cloth Electrodes for Capacitive Deionization," ACS Applied Energy Materials, vol. 4, no. 8, pp. 8275-8284, 2021.
[61]
E. Toledo-Carrillo et al., "Asymmetric electrode capacitive deionization for energy efficient desalination," Electrochimica Acta, vol. 358, 2020.
[62]
J. Nordstrand and J. Dutta, "Basis and Prospects of Combining Electroadsorption Modeling Approaches for Capacitive Deionization," Physics, vol. 2, no. 2, pp. 309-324, 2020.
[63]
S. Kumar et al., "Biodegradable Hybrid Nanocomposite of Chitosan/Gelatin and Green Synthesized Zinc Oxide Nanoparticles for Food Packaging," Foods, vol. 9, no. 9, 2020.
[64]
S. Kumar, A. Mukherjee and J. Dutta, "Chitosan based nanocomposite films and coatings : Emerging antimicrobial food packaging alternatives," Trends in Food Science & Technology, vol. 97, pp. 196-209, 2020.
[65]
H. S. Bahari et al., "Chitosan nanocomposite coatings with enhanced corrosion inhibition effects for copper," International Journal of Biological Macromolecules, vol. 162, pp. 1566-1577, 2020.
[66]
J. Nordstrand and J. Dutta, "Design principles for enhanced up-scaling of flow-through capacitive deionization for water desalination," Desalination, 2020.
[67]
K. Laxman et al., "Disinfection of Bacteria in Water by Capacitive Deionization," Frontiers in Chemistry, vol. 8, 2020.
[68]
A. Haghighatzadeh et al., "Facile synthesis of ZnS-Ag2S core-shell nanospheres with enhanced nonlinear refraction," Journal of materials science. Materials in electronics, vol. 31, no. 2, pp. 1283-1292, 2020.
[69]
M. I. Alvarado Ávila, E. A. Toledo-Carrillo and J. Dutta, "Improved chlorate production with platinum nanoparticles deposited on fluorinated activated carbon cloth electrodes," Cleaner Engineering and Technology, vol. 1, 2020.
[70]
M. Goerlin et al., "Key activity descriptors of nickel-iron oxygen evolution electrocatalysts in the presence of alkali metal cations," Nature Communications, vol. 11, no. 1, 2020.
[71]
Y. Zhao et al., "Multimodal Imaging of Pancreatic Ductal Adenocarcinoma Using Multifunctional Nanoparticles as Contrast Agents," ACS Applied Materials and Interfaces, vol. 12, no. 48, pp. 53665-53681, 2020.
[72]
J. Nordstrand and J. Dutta, "Predicting and Enhancing the Ion Selectivity in Multi-Ion Capacitive Deionization," Langmuir, vol. 36, no. 29, pp. 8476-8484, 2020.
[73]
J. Nordstrand and J. Dutta, "Simplified Prediction of Ion Removal in Capacitive Deionization of Multi-Ion Solutions," Langmuir, vol. 36, no. 5, pp. 1338-1344, 2020.
[74]
R. Al-Soubaihi et al., "Synthesis of hierarchically porous silica aerogel supported Palladium catalyst for low-temperature CO oxidation under ignition/extinction conditions," Microporous and Mesoporous Materials, vol. 292, 2020.
[75]
J. Nordstrand et al., "An Easy-to-Use Tool for Modeling the Dynamics of Capacitive Deionization," Journal of Physical Chemistry A, vol. 123, no. 30, pp. 6628-6634, 2019.
[76]
L. Al-Naamani et al., "Antifouling properties or chitosan coatings on plastic substrates," Journal of Agricultural and Marine Sciences, vol. 23, no. 1, pp. 92-98, 2019.
[77]
S. Kumar et al., "Bionanocomposite films of agar incorporated with ZnO nanoparticles as an active packaging material for shelf life extension of green grape," Heliyon, vol. 5, no. 6, 2019.
[78]
S. Kumar et al., "Chitosan Nanocomposite Coatings for Food, Paints, and Water Treatment Applications," Applied Sciences : APPS, vol. 9, no. 12, pp. 2409, 2019.
[79]
M. Al-Abri et al., "Chlorination disadvantages and alternative routes for biofouling control in reverse osmosis desalination," npj Clean Water, vol. 2, no. 1, 2019.
[80]
M. Al-Abri et al., "Chlorination disadvantages and alternative routes for biofouling control in reverse osmosis desalination (vol 2, 2, 2019)," NPJ CLEAN WATER, vol. 2, 2019.
[81]
O. A. Fasanya et al., "Copper zinc oxide nanocatalysts grown on cordierite substrate for hydrogen production using methanol steam reforming," International journal of hydrogen energy, vol. 44, no. 41, pp. 22936-22946, 2019.
[82]
J. Nordstrand and J. Dutta, "Dynamic Langmuir Model : A Simpler Approach to Modeling Capacitive Deionization," The Journal of Physical Chemistry C, vol. 123, no. 26, pp. 16479-16485, 2019.
[83]
T. S. Tofa et al., "Enhanced Visible Light Photodegradation of Microplastic Fragments with Plasmonic Platinum/Zinc Oxide Nanorod Photocatalysts," Catalysts, vol. 9, no. 10, 2019.
[84]
H. Karimiyan et al., "Graphene Oxide/Polyethylene Glycol-Stick for Thin Film Microextraction of beta-Blockers from Human Oral Fluid by Liquid Chromatography-Tandem Mass Spectrometry," Molecules, vol. 24, no. 20, 2019.
[85]
H. H. M. Yusof et al., "Low-Cost Integrated Zinc Oxide Nanorods Based Humidity Sensors for Arduino Platform," IEEE Sensors Journal, vol. 9, no. 7, pp. 2442-2449, 2019.
[86]
L. Yohai et al., "Nanocomposite functionalized membranes based on silica nanoparticles oss-linked to electrospun nanofibrous support for arsenic(v) sorption from contaminated underground water," RSC Advances, vol. 9, no. 15, pp. 8280-8289, 2019.
[87]
T. Bora and J. Dutta, "Plasmonic Photocatalyst Design : Metal-Semiconductor Junction Affecting Photocatalytic Efficiency," Journal of Nanoscience and Nanotechnology, vol. 19, no. 1, pp. 383-388, 2019.
[88]
K. Laxman et al., "Tailoring the pressure drop and fluid distribution of a capacitive deionization device," Desalination, vol. 449, pp. 111-117, 2019.
[89]
H. I. Falfushynska et al., "The effects of ZnO nanostructures of different morphology on bioenergetics and stress response biomarkers of the blue mussels Mytilus edulis," Science of the Total Environment, vol. 694, 2019.
[90]
H. H. Kyaw et al., "The influence of initial gold nanoparticles layer on migration of silver nanoparticles in silver/glass matrix," Thin Solid Films, vol. 685, pp. 216-224, 2019.
[91]
T. S. Tofa et al., "Visible light photocatalytic degradation of microplastic residues with zinc oxide nanorods," Environmental Chemistry Letters, vol. 17, no. 3, pp. 1341-1346, 2019.
[92]
R. M. Al Soubaihi, K. M. Saoud and J. Dutta, "Critical Review of Low-Temperature CO Oxidation and Hysteresis Phenomenon on Heterogeneous Catalysts," Catalysts, vol. 8, no. 12, 2018.
[93]
M. Shafiq, K. Laxman and J. Dutta, "Estimation of ion adsorption using iterative analytical model in capacitive deionization process," Desalination and Water Treatment, vol. 116, pp. 75-82, 2018.
[94]
L. Al-Naamani, J. Dutta and S. Dobretsov, "Nanocomposite Zinc Oxide-Chitosan Coatings on Polyethylene Films for Extending Storage Life of Okra (Abelmoschus esculentus)," Nanomaterials, vol. 8, no. 7, 2018.
[95]
K. Laxman et al., "Nanoparticulate Dielectric Overlayer for Enhanced Electric Fields in a Capacitive Deionization Device," ACS Applied Materials and Interfaces, vol. 10, no. 6, pp. 5941-5948, 2018.
[96]
H. H. M. Yusof et al., "Optical dynamic range maximization for humidity sensing by controlling growth of zinc oxide nanorods," PHOTONICS AND NANOSTRUCTURES-FUNDAMENTALS AND APPLICATIONS, vol. 30, pp. 57-64, 2018.
[97]
P. Loiko et al., "Oriented zinc oxide nanorods : A novel saturable absorber for lasers in the near-infrared," Beilstein Journal of Nanotechnology, vol. 9, pp. 2730-2740, 2018.
[98]
M. Khalid et al., "Raman Spectroscopy detects changes in Bone Mineral Quality and Collagen Cross-linkage in Staphylococcus Infected Human Bone.," Scientific Reports, vol. 8, no. 1, 2018.
[99]
R. Al-Soubaihi et al., "Silica and carbon decorated silica nanosheet impact on primary human immune cells," Colloids and Surfaces B : Biointerfaces, vol. 172, pp. 779-789, 2018.
[100]
J. Al-Sabahi et al., "Visible light photocatalytic degradation of HPAM polymer in oil produced water using supported zinc oxide nanorods," Chemical Engineering Journal, vol. 351, pp. 56-64, 2018.
[101]
M. H. Al-Hinai et al., "Antimicrobial Activity Enhancement of Poly(ether sulfone) Membranes by in Situ Growth of ZnO Nanorods," ACS Omega, vol. 2, no. 7, pp. 3157-3167, 2017.
[102]
P. Sathe et al., "Bioinspired nanocoatings for biofouling prevention by photocatalytic redox reactions," Scientific Reports, vol. 7, no. 1, 2017.
[103]
L. Al-Naamani et al., "Chitosan-zinc oxide nanocomposite coatings for the prevention of marine biofouling," Chemosphere, vol. 168, pp. 408-417, 2017.
[104]
T. Bora et al., "Defect engineered visible light active ZnO nanorods for photocatalytic treatment of water," Catalysis Today, vol. 284, pp. 11-18, 2017.
[105]
J. Al-Sabahi et al., "Efficient visible light photocatalysis of benzene, toluene, ethylbenzene and xylene (BTEX) in aqueous solutions using supported zinc oxide nanorods," PLOS ONE, vol. 12, no. 12, 2017.
[106]
N. Nikkam et al., "Fabrication and thermo-physical properties characterization of ethylene glycol-MoS2 heat exchange fluids," International Communications in Heat and Mass Transfer, vol. 89, pp. 185-189, 2017.
[107]
M. J. Al-Saadi et al., "Influence of Atomic Hydrogen, Band Bending, and Defects in the Top Few Nanometers of Hydrothermally Prepared Zinc Oxide Nanorods," Nanoscale Research Letters, vol. 12, 2017.
[108]
H. H. Kyaw et al., "Observation of exchanging role of gold and silver nanoparticles in bimetallic thin film upon annealing above the glass transition temperature," Materials Research Express, vol. 4, no. 8, 2017.
[109]
R. M. Ashour et al., "Rare Earth Ions Adsorption onto Graphene Oxide Nanosheets," Solvent extraction and ion exchange, vol. 35, no. 2, pp. 91-103, 2017.
[110]
R. M. Ashour et al., "Selective separation of rare earth ions from aqueous solution using functionalized magnetite nanoparticles : kinetic and thermodynamic studies," Chemical Engineering Journal, vol. 327, pp. 286-296, 2017.
[111]
E. H. Alsharaeh et al., "Sol-Gel-Assisted Microwave-Derived Synthesis of Anatase Ag/TiO2/GO Nanohybrids toward Efficient Visible Light Phenol Degradation," Catalysts, vol. 7, no. 5, 2017.
[112]
K. K. Laxman et al., "Supported versus colloidal zinc oxide for advanced oxidation processes," Applied Surface Science, vol. 411, pp. 285-290, 2017.
[113]
H. R. B. A. Rahim et al., "TEMPERATURE SENSING BY SIDE COUPLING OF LIGHT THROUGH ZINC OXIDE NANORODS ON OPTICAL FIBERS," Sensors and Actuators A-Physical, vol. 257, pp. 15-19, 2017.
[114]
H. R. Bin Abdul Rahim et al., "Applied light-side coupling with optimized spiral-patterned zinc oxide nanorod coatings for multiple optical channel alcohol vapor sensing," Journal of Nanophotonics, vol. 10, no. 3, 2016.
[115]
L. Al-Naamani, S. Dobretsov and J. Dutta, "Chitosan-zinc oxide nanoparticle composite coating for active food packaging applications," Innovative Food Science & Emerging Technologies, vol. 38, pp. 231-237, 2016.
[116]
J. Al-Sabahi et al., "Controlled defects of zinc oxide nanorods for efficient visible light photocatalytic degradation of phenol," Materials, vol. 9, no. 4, 2016.
[117]
A. M. Al-Hamdi et al., "Efficient photocatalytic degradation of phenol in aqueous solution by SnO2:Sb nanoparticles," Applied Surface Science, vol. 370, pp. 229-236, 2016.
[118]
T. Bora, D. Zoepfl and J. Dutta, "Importance of Plasmonic Heating on Visible Light Driven Photocatalysis of Gold Nanoparticle Decorated Zinc Oxide Nanorods," Scientific Reports, vol. 6, 2016.
[119]
A. M. Al-Hamdi, M. Sillanpää and J. Dutta, "Intermediate formation during photodegradation of phenol using lanthanum doped tin dioxide nanoparticles," Research on chemical intermediates (Print), vol. 42, no. 4, pp. 3055-3069, 2016.
[120]
F. Karim et al., "Measurement of aluminum oxide film by Fabry-Pérot interferometry and scanning electron microscopy," Journal of Saudi Chemical Society, 2016.
[121]
S. Baruah, M. N. Khan and J. Dutta, "Perspectives and applications of nanotechnology in water treatment," Environmental Chemistry Letters, vol. 14, no. 1, pp. 1-14, 2016.
[122]
M. N. Khan and J. Dutta, "Photocatalytic Inactivation of Escherichia Coli using Zinc Stannate Nanostructures under Visible Light," Advanced Materials Research, vol. 1131, 2016.
[123]
P. Sathe et al., "Removal and regrowth inhibition of microalgae using visible light photocatalysis with ZnO nanorods : a green technology," Separation and Purification Technology, vol. 162, pp. 61-67, 2016.
[124]
R. Al Alawai et al., "Role of bonding mechanisms during transfer hydrogenation reaction on heterogeneous catalysts of platinum nanoparticles supported on zinc oxide nanorods," Applied Surface Science, pp. 200-206, 2016.
[125]
P. Sathe et al., "Self-decontaminating photocatalytic zinc oxide nanorod coatings for marine microfouling prevention : a mesocosm study," Biofouling (Print), vol. 32, no. 4, pp. 383-395, 2016.
[126]
H. R. B. A. Rahim et al., "Side coupling of multiple optical channels by spiral patterned zinc oxide coatings on large core plastic optical fibers," Micro & Nano Letters, vol. 11, no. 2, pp. 122-126, 2016.
[127]
K. Laxman, L. Al Gharibi and J. Dutta, "Capacitive deionization with asymmetric electrodes: Electrode capacitance vs electrode surface area : Electrode capacitance vs electrode surface area," Electrochimica Acta, vol. 176, pp. 420-425, 2015.
[128]
M. N. Khan and J. Dutta, "Comparison of photocatalytic activity of zinc stannate particles and zinc stannate/zinc oxide composites for the removal of phenol from water, and a study on the effect of pH on photocatalytic efficiency," Materials Science in Semiconductor Processing, vol. 36, pp. 124-133, 2015.
[129]
K. Laxman et al., "Desalination and disinfection of inland brackish ground water in a capacitive deionization cell using nanoporous activated carbon cloth electrodes," Desalination, vol. 362, pp. 126-132, 2015.
[130]
H. H. Kyaw et al., "Design of electric-field assisted surface plasmon resonance system for the detection of heavy metal ions in water," AIP Advances, vol. 5, no. 10, 2015.
[131]
K. Laxman et al., "Effect of a semiconductor dielectric coating on the salt adsorption capacity of a porous electrode in a capacitive deionization cell," Electrochimica Acta, vol. 166, pp. 329-337, 2015.
[132]
K. Laxman et al., "Efficient desalination of brackish ground water via a novel capacitive deionization cell using nanoporous activated carbon cloth electrodes," Journal of Engineering Research, vol. 12, no. 2, pp. 22-31, 2015.
[133]
S. Danwittayakul, M. Jaisai and J. Dutta, "Efficient solar photocatalytic degradation of textile wastewater using ZnO/ZTO composites," Applied Catalysis B: Environmental, vol. 163, pp. 1-8, 2015.
[134]
A. M. Al-Hamdi, M. Sillanpaa and J. Dutta, "Gadolinium doped tin dioxide nanoparticles : an efficient visible light active photocatalyst," Journal of Rare Earths, vol. 33, no. 12, pp. 1275-1283, 2015.
[135]
S. B.D. Borah et al., "Heavy metal ion sensing in water using surface plasmon resonance of metallic nanostructures," Groundwater for Sustainable Development, vol. 1, no. 1-2, pp. 1-11, 2015.
[136]
K. Laxman et al., "Improved desalination by zinc oxide nanorod induced electric field enhancement in capacitive deionization of brackish water," Desalination, vol. 359, pp. 64-70, 2015.
[137]
B. Sarkar and J. Dutta, "Optimization of the sublethal dose of silver nanoparticle through evaluating its effect on intestinal physiology of Nile tilapia (Oreochromis niloticus L.)," Journal of Environmental Science and Health. Part A : Toxic/Hazardous Substances and Environmental Engineering, vol. 50, no. 8, pp. 814-823, 2015.
[138]
T. Bora et al., "Phase Transformation of Metastable ZnSnO3 Upon Thermal Decomposition by In-Situ Temperature-Dependent Raman Spectroscopy," Journal of The American Ceramic Society, 2015.
[139]
A. M. Al-Hamdi, M. Sillanpää and J. Dutta, "Photocatalytic degradation of phenol by iodine doped tin oxide nanoparticles under UV and sunlight irradiation," Journal of Alloys and Compounds, vol. 618, pp. 366-371, 2015.
[140]
T. Bora et al., "Role of surface defects on visible light enabled plasmonic photocatalysis in Au–ZnO nanocatalysts," RSC Advances, vol. 5, no. 117, pp. 96670-96680, 2015.
[141]
H. H. Kyaw et al., "Self-organization of gold nanoparticles on silanated surfaces," Beilstein Journal of Nanotechnology, vol. 6, pp. 2345-2353, 2015.
[142]
K. Saoud et al., "Synthesis of supported silver nano-spheres on zinc oxide nanorods for visible light photocatalytic applications," Materials research bulletin, vol. 63, pp. 134-140, 2015.
[143]
M. Al-Fori et al., "Antifouling properties of zinc oxide nanorod coatings," Biofouling, vol. 30, no. 7, pp. 871-882, 2014.
[144]
A. T. Al-Hinai, M. H. Al-Hinai and J. Dutta, "Application of Eh-pH diagram for room temperature precipitation of zinc stannate microcubes in an aqueous media," Materials research bulletin, vol. 49, no. 1, pp. 645-650, 2014.
[145]
T. Bora and J. Dutta, "Applications of nanotechnology in wastewater treatment-A review," Journal of Nanoscience and Nanotechnology, vol. 14, no. 1, pp. 613-626, 2014.
[146]
M. T. Z. Myint, S. H. Al-Harthi and J. Dutta, "Brackish water desalination by capacitive deionization using zinc oxide micro/nanostructures grafted on activated carbon cloth electrodes," Desalination, vol. 344, pp. 236-242, 2014.
[147]
S. Danwittayakul and J. Dutta, "Controlled growth of zinc oxide microrods by hydrothermal process on porous ceramic supports for catalytic application," Journal of Alloys and Compounds, vol. 586, pp. 169-175, 2014.
[148]
T. Bora et al., "Controlled side coupling of light to cladding mode of ZnO nanorod coated optical fibers and its implications for chemical vapor sensing," Sensors and actuators. B, Chemical, vol. 202, pp. 543-550, 2014.
[149]
S. Danwittayakul et al., "Enhanced hydrogen selectivity via photo-engineered surface defects for methanol steam reformation using zinc oxide-copper nanocomposite catalysts," Applied Catalysis A : General, vol. 471, pp. 63-69, 2014.
[150]
K. Laxman et al., "Enhancement in ion adsorption rate and desalination efficiency in a capacitive deionization cell through improved electric field distribution using electrodes composed of activated carbon cloth coated with zinc oxide nanorods," ACS Applied Materials and Interfaces, vol. 6, no. 13, pp. 10113-10120, 2014.
[151]
H. Fallah et al., "Excitation of core modes through side coupling to multimode optical fiber by hydrothermal growth of ZnO nanorods for wide angle optical reception," Journal of the Optical Society of America. B, Optical physics, vol. 31, no. 9, pp. 2232-2238, 2014.
[152]
S. B. D. Borah et al., "Heavy Metal Ion Sensing By Surface Plasmon Resonance on Gold Nanoparticles," ADBU Journal of Engineering Technology, vol. 1, 2014.
[153]
K. Laxman et al., "Improved sensitization of zinc oxide nanorods by cadmium telluride quantum dots through charge induced hydrophilic surface generation," Journal of Nanomaterials, vol. 2014, 2014.
[154]
A. B. Ahmed et al., "Microwave-enhanced degradation of phenol over Ni-loaded ZnO nanorods catalyst," Applied Catalysis B : Environmental, vol. 156-157, pp. 456-465, 2014.
[155]
M. Shah Alam, W. S. Mohammed and J. Dutta, "Multilayered gold/silica nanoparticulate bilayer devices using layer-by-layer self organisation for flexible bending and pressure sensing applications," Applied Physics Letters, vol. 104, no. 7, 2014.
[156]
M. T. Z. Myint, G. L. Hornyak and J. Dutta, "One pot synthesis of opposing ’rose petal’ and ’lotus leaf’ superhydrophobic materials with zinc oxide nanorods," Journal of Colloid and Interface Science, vol. 415, pp. 32-38, 2014.
[157]
M. H. Al-Hinai, A. T. Al-Hinai and J. Dutta, "Phase transformation behavior of zinc metastannates obtained by aqueous precipitation at different temperatures," Journal of Materials Science, vol. 49, no. 20, pp. 7282-7289, 2014.
[158]
A. M. Al-Hamdi, M. Sillanpää and J. Dutta, "Photocatalytic degradation of phenol in aqueous solution by rare earth-doped SnO2 nanoparticles," Journal of Materials Science, vol. 49, no. 14, pp. 5151-5159, 2014.
[159]
T. Bora, H. H. Kyaw and J. Dutta, "Plasmon resonance enhanced zinc oxide photoelectrodes for improvement in performance of dye sensitized solar cells," Materials Science Forum, vol. 771, pp. 91-101, 2014.
[160]
M. Najam Khan et al., "Visible light photocatalysis of mixed phase zinc stannate/zinc oxide nanostructures precipitated at room temperature in aqueous media," Ceramics International, vol. 40, no. 6, pp. 8743-8752, 2014.
[161]
H. Fallah et al., "Demonstration of side coupling to cladding modes through zinc oxide nanorods grown on multimode optical fiber," Optics Letters, vol. 38, no. 18, pp. 3620-3622, 2013.
[162]
P. Teerapanich et al., "Development and improvement of carbon nanotube based ammonia gas sensors using ink-jet printed interdigitated electrodes," IEEE transactions on nanotechnology, vol. 12, no. 2, pp. 255-262, 2013.
[163]
C. Viphavakit et al., "Development of integrated microfluidic device for optical flow rate sensing," Journal of Circuits, Systems and Computers, vol. 22, no. 9, 2013.
[164]
Z. A. Khan, R. Kumar and J. Dutta, "Effective medium theory applied to colloidal solution of gold nanoparticles and alternating gold-silica multilayer thin film composites," Journal of the Chemical Society of Pakistan, vol. 35, no. 2, pp. 250-256, 2013.
[165]
S. Danwittayakul et al., "Enhancement of photocatalytic degradation of methyl orange by supported zinc oxide nanorods/zinc stannate (ZnO/ZTO) on porous substrates," Industrial and Engineering Chemistry Research, vol. 52, no. 38, pp. 13629-13636, 2013.
[166]
M. T. Z. Myint et al., "Hydrophobic/hydrophilic switching on zinc oxide micro-textured surface," Applied Surface Science, vol. 264, pp. 344-348, 2013.
[167]
S. Promnimit et al., "Hydrothermal growth of ZnO hexagonal nanocrystals : Effect of growth conditions," Journal of nanoparticle research, vol. 21, pp. 57-63, 2013.
[168]
S. Barua and J. Dutta, "Liquified Petroleum Gas Sensing using Microballs of ZnO," lndian ]ournal of Science and Technology, vol. 6, no. S3, pp. 190-193, 2013.
[169]
T. Bora et al., "Modulation of defect-mediated energy transfer from ZnO nanoparticles for the photocatalytic degradation of bilirubin," Beilstein Journal of Nanotechnology, vol. 4, no. 1, pp. 714-725, 2013.
[170]
F. Karim et al., "Optical fiber-based sensor for in situ monitoring of cadmium sulfide thin-film growth," Optics Letters, vol. 38, no. 24, pp. 5385-5388, 2013.
[171]
A. Giri et al., "Rational surface modification of Mn3O4 nanoparticles to induce multiple photoluminescence and room temperature ferromagnetism," Journal of Materials Chemistry C, vol. 1, no. 9, pp. 1885-1895, 2013.
[172]
S. Sardar et al., "Role of Central Metal Ion in Hematoporphyrin-Functionalized Titania in Solar Energy Conversion Dynamics," Physical Chemistry, Chemical Physics - PCCP, vol. 15, no. 42, pp. 18562-18570, 2013.
[173]
M. A. Mahmood, T. Bora and J. Dutta, "Studies on hydrothermally synthesised zinc oxide nanorod arrays for their enhanced visible light photocatalysis," International Journal of Environmental Technology and Management, vol. 16, no. 1-2, pp. 146-159, 2013.
[174]
S. Danwittayakul and J. Dutta, "Two step copper impregnated zinc oxide microball synthesis for the reduction of activation energy of methanol steam reformation," Chemical Engineering Journal, vol. 223, pp. 304-308, 2013.
[175]
S. Banerjee et al., "UVA radiation induced ultrafast electron transfer from a food carcinogen benzo[a]pyrene to organic molecules, biological macromolecules, and inorganic nano structures," Journal of Physical Chemistry B, vol. 117, no. 14, pp. 3726-3737, 2013.
[176]
A. Sabah et al., "Visible-light-induced directed gold microwires by self-organization of nanoparticles on Aspergillus Niger," Particle & particle systems characterization, vol. 30, no. 5, pp. 473-480, 2013.
[177]
S. Promnimit et al., "Chitosan capped colloidal gold nanoparticles for sensing zinc ions in water," Journal of Nano Research, vol. 16, pp. 55-61, 2012.
[178]
M. B. Chaudhari et al., "Chromatic tuning of plasmon resonance of tri-layered composites : Silver, gold and copper nanoparticles for optical thin film colour filter," Micro & Nano Letters, vol. 7, no. 2, pp. 146-148, 2012.
[179]
S. Baruah, M. Jaisai and J. Dutta, "Development of a visible light active photocatalytic portable water purification unit using ZnO nanorods," Catalysis Science & Technology, vol. 2, no. 5, pp. 918-921, 2012.
[180]
S. Sarkar et al., "Dual-sensitization via electron and energy harvesting in CdTe quantum dots decorated ZnO nanorod-based dye-sensitized solar cells," The Journal of Physical Chemistry C, vol. 116, no. 27, pp. 14248-14256, 2012.
[181]
M. T. Z. Myint and J. Dutta, "Fabrication of zinc oxide nanorods modified activated carbon cloth electrode for desalination of brackish water using capacitive deionization approach," Desalination, vol. 305, pp. 24-30, 2012.
[182]
A. Sabah et al., "Growth of templated gold microwires by self organisation of colloids on Aspergillus niger," Digest Journal of Nanomaterials and Biostructures, vol. 7, no. 2, pp. 583-591, 2012.
[183]
S. Sarkar et al., "Hematoporphyrin-ZnO nanohybrids : Twin applications in efficient visible-light photocatalysis and dye-sensitized solar cells," ACS Applied Materials and Interfaces, vol. 4, no. 12, pp. 7027-7035, 2012.
[184]
M. A. Mahmood et al., "Heterogeneous photocatalysis for removal of microbes from water," Environmental Chemistry Letters, vol. 10, no. 2, pp. 145-151, 2012.
[185]
S. Baruah et al., "Manganese doped zinc sulfide quantum dots for detection of Escherichia coli," Journal of Fluorescence, vol. 22, no. 1, pp. 403-408, 2012.
[186]
M. A. Mahmood and J. Dutta, "Microwave assisted hydrothermal synthesis of zinc hydroxystannate films on glass substrates," Journal of Sol-Gel Science and Technology, vol. 62, no. 3, pp. 495-504, 2012.
[187]
Z. A. Khan, R. Kumar and J. Dutta, "Multilayer thin films of colloidal gold and silica nanoparticles : Effect of polyelectrolyte coating," Canadian Journal of Chemical Engineering, vol. 90, no. 4, pp. 919-924, 2012.
[188]
S. Sarkar et al., "Nanoparticle-Sensitized Photodegradation of Bilirubin and Potential Therapeutic Application," The Journal of Physical Chemistry C, vol. 116, no. 17, pp. 9608-9615, 2012.
[189]
S. Baruah, S. K. Pal and J. Dutta, "Nanostructured zinc oxide for water treatment," Nanoscience and Nanotechnology - Asia, vol. 2, no. 2, pp. 90-102, 2012.
[190]
H. H. Kyaw, T. Bora and J. Dutta, "One-Diode Model Equivalent Circuit Analysis for ZnO Nanorod-Based Dye-Sensitized Solar Cells : Effects of Annealing and Active Area," IEEE transactions on nanotechnology, vol. 11, no. 4, pp. 763-768, 2012.
[191]
M. Jaisai, S. Baruah and J. Dutta, "Paper modified with ZnO nanorods–antimicrobial studies," Beilstein Journal of Nanotechnology, vol. 3, no. 1, pp. 684-691, 2012.
[192]
P. Teesetsopon, S. Kumar and J. Dutta, "Photoelectrode Optimization of Zinc Oxide Nanoparticle Based Dye-Sensitized Solar Cell by Thermal Treatment," International Journal of Electrochemical Science, vol. 7, no. 6, pp. 4988-4999, 2012.
[193]
S. Promnimit and J. Dutta, "Self-organization of colloidal nanoparticles into functional pressure sensing device," Journal of Nanoscience and Nanotechnology, vol. 12, no. 10, pp. 8143-8146, 2012.
[194]
S. Danwittayakul and J. Dutta, "Zinc oxide nanorods based catalysts for hydrogen production by steam reforming of methanol," International journal of hydrogen energy, vol. 37, no. 7, pp. 5518-5526, 2012.
[195]
T. Bora, H. H. Kyaw and J. Dutta, "Zinc oxide–zinc stannate core–shell nanorod arrays for CdS quantum dot sensitized solar cells," Electrochimica Acta, vol. 68, pp. 141-145, 2012.
[196]
M. A. Mahmood, S. Baruah and J. Dutta, "Enhanced visible light photocatalysis by manganese doping or rapid crystallization with ZnO nanoparticles," Materials Chemistry and Physics, vol. 130, no. 1-2, pp. 531-535, 2011.
[197]
A. Sivapunniyam et al., "High-performance liquefied petroleum gas sensing based on nanostructures of zinc oxide and zinc stannate," Sensors and Actuators B: Chemical, vol. 157, no. 1, pp. 232-239, 2011.
[198]
T. Bora et al., "Highly efficient ZnO/Au Schottky barrier dye-sensitized solar cells : Role of gold nanoparticles on the charge-transfer process," Beilstein Journal of Nanotechnology, vol. 2, no. 1, pp. 681-690, 2011.
[199]
Z. A. Khan et al., "Optical thin film filters of colloidal gold and silica nanoparticles prepared by a layer-by-layer self-assembly method," Journal of Materials Science, vol. 46, no. 21, pp. 6877-6882, 2011.
[200]
S. Sarkar et al., "Photoselective excited state dynamics in ZnO–Au nanocomposites and their implications in photocatalysis and dye-sensitized solar cells," Physical Chemistry Chemical Physics, vol. 13, no. 27, pp. 12488-12496, 2011.
[201]
R. Kitsomboonloha et al., "Plasmon resonance tuning of gold and silver nanoparticle-insulator multilayered composite structures for optical filters," Micro & Nano Letters, vol. 6, no. 6, pp. 342-344, 2011.
[202]
R. Imani et al., "Production of antibacterial filter paper from wood cellulose," BioResources, vol. 6, no. 1, pp. 891-900, 2011.
[203]
M. A. Mahmood and J. Dutta, "Spray pyrolized pre-coating layers for controlled growth of zinc oxide nanorods by hydrothermal process," Nanoscience and Nanotechnology - Asia, vol. 1, no. 2, pp. 92-96, 2011.
[204]
M. T. Z. Myint et al., "Superhydrophobic surfaces using selected zinc oxide microrod growth on ink-jetted patterns," Journal of Colloid and Interface Science, vol. 354, no. 2, pp. 810-815, 2011.
[205]
P. Boonyanitipong et al., "Toxicity of ZnO and TiO2 Nanoparticles on Germinating Rice Seed," International Journal of Bioscience, Biochemistry and Bioinformatics, vol. 1, pp. 282-285, 2011.
[206]
A. Sapkota et al., "Zinc oxide nanorod mediated visible light photoinactivation of model microbes in water," Nanotechnology, vol. 22, no. 21, 2011.
[207]
S. Baruah and J. Dutta, "Zinc stannate nanostructures : Hydrothermal synthesis," Science and Technology of Advanced Materials, vol. 12, no. 1, 2011.
[208]
A. Makhal et al., "Dynamics of light harvesting in ZnO nanoparticles," Nanotechnology, vol. 21, no. 26, pp. 265703-1, 2010.
[209]
S. Baruah et al., "Enhanced visible light photocatalysis through fast crystallization of zinc oxide nanorods," Beilstein Journal of Nanotechnology, vol. 1, no. 1, pp. 14-20, 2010.
[210]
A. J. Anceno et al., "Nanoparticle self-assembly via facile (Bio)chemistry : Charge-stabilized metal nanoparticles on microbial cell surfaces," Journal of Bionanoscience, vol. 4, no. 1-2, pp. 92-98, 2010.
[211]
S. Baruah et al., "Photocatalytic paper using zinc oxide nanorods," Science and Technology of Advanced Materials, vol. 11, no. 5, 2010.
[212]
A. Makhal et al., "Role of resonance energy transfer in light harvesting of zinc oxide-based dye-sensitized solar cells," The Journal of Physical Chemistry C, vol. 114, no. 23, pp. 10390-10395, 2010.
[213]
S. Promnimit and J. Dutta, "Synthesis and electrical characterization of multilayer thin films designed by Layer-by-Layer self assembly of nanoparticles," Journal of Nano Research, vol. 11, pp. 1-6, 2010.
[214]
S. Baruah and J. Dutta, "Effect of seeded substrates on hydrothermally grown ZnO nanorods," Journal of Sol-Gel Science and Technology, vol. 50, no. 3, pp. 456-464, 2009.
[215]
S. Baruah and J. Dutta, "Hydrothermal growth of ZnO nanostructures," Science and Technology of Advanced Materials, vol. 10, no. 1, 2009.
[216]
S. Baruah and J. Dutta, "Nanotechnology applications in pollution sensing and degradation in agriculture," Environmental Chemistry Letters, vol. 7, no. 3, pp. 191-204, 2009.
[217]
S. Baruah et al., "Photoreactivity of ZnO nanoparticles in visible light : Effect of surface states on electron transfer reaction," Journal of Applied Physics, vol. 105, no. 7, 2009.
[218]
R. Kitsomboonloha et al., "Selective growth of zinc oxide nanorods on inkjet printed seed patterns," Journal of Crystal Growth, vol. 311, no. 8, pp. 2352-2358, 2009.
[219]
S. Baruah and J. Dutta, "pH-dependent growth of zinc oxide nanorods," Journal of Crystal Growth, vol. 311, no. 8, pp. 2549-2554, 2009.
[220]
S. Promnimit et al., "Conduction properties of layer-by-layer self-assembled multilayer nanoparticulate structures," Journal of Nanoelectronics and Optoelectronics, vol. 3, no. 2, pp. 184-189, 2008.
[221]
S. Baruah, C. Thanachayanont and J. Dutta, "Growth of ZnO nanowires on nonwoven polyethylene fibers," Science and Technology of Advanced Materials, vol. 9, no. 2, 2008.
[222]
S. Promnimit et al., "Growth of gold/zinc sulphide multilayer films using layer-by-layer assembly of colloidal nanoparticles," Physica. E, Low-Dimensional systems and nanostructures, vol. 41, no. 2, pp. 285-291, 2008.
[223]
R. Ullah and J. Dutta, "Photocatalytic degradation of organic dyes with manganese-doped ZnO nanoparticles," Journal of Hazardous Materials, vol. 156, no. 1-3, pp. 194-200, 2008.
[224]
S. Baruah et al., "Studies on chitosan stabilised ZnS:Mn2+ nanoparticles," Journal of Bionanoscience, vol. 2, no. 1, pp. 42-48, 2008.
[225]
S. Baruah, R. F. Rafique and J. Dutta, "Visible light photocatalysis by tailoring crystal defections in zinc oxide nanostructures," Nano, vol. 3, no. 5, pp. 399-407, 2008.
[226]
A. Sugunan et al., "Nutrition-driven assembly of colloidal nanoparticles : Growing fungi assemble gold nanoparticles as microwires," Advanced Materials, vol. 19, no. 1, pp. 77-81, 2007.
[227]
S. H. M. Jafri et al., "Current-voltage characteristics of layer-by-layer self-assembled colloidal thin films," Applied Physics Letters, vol. 89, no. 13, 2006.
[228]
A. Sugunan et al., "Zinc oxide nanowires in chemical bath on seeded substrates : Role of hexamine," Journal of Sol-Gel Science and Technology, vol. 39, no. 1, pp. 49-56, 2006.
[229]
O. Pummakarnchana, N. Tripathi and J. Dutta, "Air pollution monitoring and GIS modeling : A new use of nanotechnology based solid state gas sensors," Science and Technology of Advanced Materials, vol. 6, no. 3-4 SPEC. ISS., pp. 251-255, 2005.
[230]
T. Charinpanitkul et al., "Effects of cosurfactant on ZnS nanoparticle synthesis in microemulsion," Science and Technology of Advanced Materials, vol. 6, no. 3-4 SPEC. ISS., pp. 266-271, 2005.
[231]
M. K. Hossain et al., "Growth of Zinc Oxide nanowires and nanobelts for gas sensing applications," Journal of Metastable and Nanocrystalline Materials, vol. 23, pp. 27-30, 2005.
[232]
A. Sugunan et al., "Heavy-metal ion sensors using chitosan-capped gold nanoparticles," Science and Technology of Advanced Materials, vol. 6, no. 3-4 SPEC. ISS., pp. 335-340, 2005.
[233]
H. C. Warad et al., "Luminescent nanoparticles of Mn doped ZnS passivated with sodium hexametaphosphate," Science and Technology of Advanced Materials, vol. 6, no. 3-4 SPEC. ISS., pp. 296-301, 2005.
[234]
L. Lemaire et al., "Effect of CuO additives on the reversibility of zirconia crystalline phase transitions," Journal of Materials Science, vol. 34, no. 9, pp. 2207-2215, 1999.
[235]
G. Carrot et al., "Gold nanoparticle synthesis in graft copolymer micelles," Colloid and Polymer Science, vol. 276, no. 10, pp. 853-859, 1998.
[236]
S. M. Scholz et al., "Mie scattering effects from monodispersed ZnS nanospheres," Journal of Applied Physics, vol. 83, no. 12, pp. 7860-7866, 1998.
[237]
S. M. Scholz et al., "Nanoporous Aggregates of ZnS Nanocrystallites," Applied organometallic chemistry, vol. 12, no. 5, pp. 327-335, 1998.
[238]
H. Hofmeister, P. Ködderitzsch and J. Dutta, "Structure of nanometersized silicon particles prepared by various gas phase processes," Journal of Non-Crystalline Solids, vol. 232-234, pp. 182-187, 1998.
[239]
R. Vacassy et al., "Synthesis of controlled spherical zinc sulfide particles by precipitation from homogeneous solutions," Journal of The American Ceramic Society, vol. 81, no. 10, pp. 2699-2705, 1998.
[240]
R. Vacassy et al., "Synthesis of zirconia-coated gold nanoparticles," Journal of materials science letters, vol. 17, no. 19, pp. 1665-1667, 1998.
[241]
J. Dutta et al., "Cluster-induced crystallization of nano-silicon particles," Nanostructured materials, vol. 9, no. 1-8, pp. 359-362, 1997.
[242]
J. Dutta et al., "Crystallization of nanosized silicon powder prepared by plasma-induced clustering reactions," AIChE Journal, vol. 43, no. 11 A, pp. 2610-2615, 1997.
[243]
G. L. Hornyak et al., "Dynamical Maxwell-Garnett optical modeling of nanogold-porous alumina composites : Mie and kappa influence on absorption maxima," Nanostructured materials, vol. 9, no. 1-8, pp. 575-578, 1997.
[244]
G. L. Hornyak et al., "Effective medium theory characterization of Au/Ag nanoalloy-porous alumina composites," Nanostructured materials, vol. 9, no. 1-8, pp. 571-574, 1997.
[245]
J. Dutta et al., "Growth, microstructure and sintering behavior of nanosized silicon powders," Colloids and Surfaces A : Physicochemical and Engineering Aspects, vol. 127, no. 1-3, pp. 263-272, 1997.
[246]
H. Hofmeister, J. Dutta and H. Hofmann, "Nanoscale ordering in amorphous silicon powders formed by plasma induced reaction of silane," Materials Science Forum, vol. 235-238, no. 2, pp. 595-600, 1997.
[247]
S. M. Scholz et al., "Raman spectroscopic study of silicon nanopowders," Journal of Materials Science & Technology, vol. 13, no. 4, pp. 327-332, 1997.
[248]
H. Hofmeister, J. Dutta and H. Hofmann, "Atomic structure of amorphous nanosized silicon powders upon thermal treatment," Physical Review B Condensed Matter, vol. 54, no. 4, pp. 2856-2862, 1996.
[249]
C. Herard et al., "Chemical synthesis and characterization of nano-crystalline palladium oxide," Nanostructured Materials, vol. 6, no. 1-4, pp. 313-316, 1995.
[250]
J. Dutta, W. Bacsa and C. Hollenstein, "Microstructural properties of silicon powder produced in a low pressure silane discharge," Journal of Applied Physics, vol. 77, no. 8, pp. 3729-3733, 1995.
[251]
J. Dutta et al., "Multilayered silicon/silicon nitride thin films deposited by plasma-CVD : Effects of crystallization," Nanostructured Materials, vol. 6, no. 5-8, pp. 843-846, 1995.
[252]
C. Bossel et al., "Processing of nano-scaled silicon powders to prepare slip cast structural ceramics," Journal of Materials Science and Engineering : A, vol. 204, no. 1-2, pp. 107-112, 1995.
[253]
J. Dutta et al., "Pyrosol deposition of fluorine-doped tin dioxide thin films," Journal of Materials Science, vol. 30, no. 1, pp. 53-62, 1995.
[254]
W. S. Bacsa and J. Dutta, "Vibrational Raman spectroscopy of silicon powders produced by plasma enhanced chemical vapor deposition," Analusis, vol. 23, no. 10, pp. 531-532, 1995.
[255]
C. Courteille et al., "Visible photoluminescence from hydrogenated silicon particles suspended in a silane plasma," Journal of Applied Physics, vol. 78, no. 1, pp. 61-66, 1995.
[256]
J. Dutta et al., "Application of pyrosol deposition process for large-area deposition of fluorine-doped tin dioxide thin films," Thin Solid Films, vol. 239, no. 1, pp. 150-155, 1994.
[257]
C. Hollenstein et al., "Diagnostics of particle genesis and growth in RF silane plasmas by ion mass spectrometry and light scattering," Plasma sources science & technology, vol. 3, no. 3, pp. 278-285, 1994.
[258]
U. Kroll et al., "Influence of higher deposition temperature on a-Si:H material properties, powder formation and light-induced degradation, using the VHF (70 MHz) glow discharge technique," Journal of Non-Crystalline Solids, vol. 164-166, pp. 59-62, 1993.
[259]
J. Dutta et al., "Dependence of intrinsic stress in hydrogenated amorphous silicon on excitation frequency in a plasma-enhanced chemical vapor deposition process," Journal of Applied Physics, vol. 72, no. 7, pp. 3220-3222, 1992.
[260]
J. Dutta et al., "Effect of Ion Bombardment on the Properties of Hydrogenated Amorphous Silicon Prepared from Undiluted and Xenon-Diluted Silane," Japanese Journal of Applied Physics, vol. 31, no. 3B, pp. L299-L302, 1992.
[261]
S. Ray et al., "Bilayer SnO2:In/SnO2 thin films as transparent electrodes of amorphous silicon solar cells," Thin Solid Films, vol. 199, no. 2, pp. 201-207, 1991.
[262]
J. Dutta and G. Ganguly, "Optically induced restructuring of a hydrogenated amorphous silicon thin-film surface," Applied Physics Letters, vol. 57, no. 12, pp. 1227-1229, 1990.
[263]
J. Dutta et al., "Comparison of the properties of hydrogenated microcrystalline silicon films deposited by photo-chemical-vapor deposition and glow-discharge deposition processes," Journal of Applied Physics, vol. 66, no. 10, pp. 4709-4714, 1989.
[264]
G. Ganguly et al., "Effect of ultraviolet irradiation on the white light degraded electronic properties of hydrogenated amorphous silicon films," Applied Physics Letters, vol. 55, no. 19, pp. 1975-1977, 1989.
[265]
G. Ganguly et al., "Radiofrequency-plasma-deposited hydrogenated fluorinated silicon-carbon alloy films," Physical Review B. Condensed Matter and Materials Physics, vol. 40, no. 6, pp. 3830-3836, 1989.
[266]
J. Dutta and S. Ray, "Variations in structural and electrical properties of magnetron-sputtered indium tin oxide films with deposition parameters," Thin Solid Films, vol. 162, no. C, pp. 119-127, 1988.
Conference papers
[267]
J. Nordstrand and J. Dutta, "2D Simulations of Water Treatment with Upscaled Capacitive Deionization," in Proceedings of the 10th International Workshop on Simulation for Energy, Sustainable Development & Environment (SESDE), 00419th International Multidisciplinary Modeling & Simulation Multiconference, 2022.
[268]
I. Plesco et al., "Photocatalytic degradation of organic dyes using TiO2 nanotube arrays and aero-ZnO-ZnS under UV and visible light illumination," in CAS 2020 proceedings : 2020 international semiconductor conference, 2020, pp. 17-20.
[269]
J. Nordstrand and J. Dutta, "Relaxed Adsorption-flow Coupling Enables Stable COMSOL Modeling of Upscaled Capacitive Deionization," in COMSOL Conference 2020 Grenoble, 14 - 16 Oct 2020, 2020.
[270]
K. Habib et al., "Electrochemical Parameters of Aluminum Oxide Film in Situ During Anodization of Aluminum by White Light-Optical Interferometry," in Corrosion, 2019.
[271]
K. Habib et al., "Measurement of aluminum oxide film in situ during anodization of aluminum by fabry-pÉrot interferometry," in Corrosion and Prevention 2017, 2017.
[272]
P. Loiko et al., "Oriented ZnO nanorods : A novel saturable absorber for lasers at 1-2 μm," in Optics InfoBase Conference Papers, 2017.
[273]
K. Habib et al., "Resistance values of aluminum oxide film in situ during anodization of aluminum by fabry-pérot interferometry," in ECS Transactions, 2017, pp. 1221-1229.
[274]
R. Vithoonsaritsilp, G. Lawrence Best and J. Dutta, "The impact of slider surface roughness on the touchdown-takeoff hysteresis phenomenon," in 5th World Tribology Congress, WTC 2013, 2014, pp. 2481-2484.
[275]
A. J. Anceno et al., "Of Quantum Dots and Microbes : Smart materials for fluorescence based characterization of environmental microflora," in Proc. of the Intl. Conf. on Future Trends in Structural, Civil, Environmental and Mechanical Engineering – FTSCEM 2013, 2013, pp. 61-65.
[276]
C. Viphavakit et al., "Development of integrated optical characterization bench for sensing microfluidic channel," in 8th IEEE International Conference on Electron Devices and Solid State Circuit (EDSSC), 2012.
[277]
B. Hemtanon et al., "Diode fabricated by layer by layer deposition of semiconductor nanoparticles," in TENCON, 2007.
[278]
S. H. M. Jafri et al., "Directed self-assembly of multilayer thin films of ZnS and gold nanoparticles by modified polyelectrolyte deposition technique," in Materials Research Society Symposium Proceedings, 2005, pp. 483-494.
[279]
A. Sugunan and J. Dutta, "Novel synthesis of gold nanoparticles in aqueous media," in Materials Research Society Symposium Proceedings, 2005, pp. 257-262.
[280]
J. Dutta and A. Sugunan, "Colloidal self-organization for nanoelectronics," in Proceedings ICSE 2004 : 2004 IEEE International Conference on Semiconductor Electronics, 2004, pp. 146-148.
[281]
R. Vacassy et al., "Nanostructured zinc sulphide phosphors," in Materials Research Society Symposium - Proceedings, 1998, pp. 369-374.
[282]
J. -. Valmalette et al., "Optical properties of gold clusters precipitated on zirconia particles," in Materials Research Society Symposium - Proceedings, 1998, pp. 85-88.
[283]
S. M. Scholz et al., "Optical properties of gold-containing poly(acrylic acid) composites," in MRS, 1998, pp. 79-84.
[284]
R. Vacassy et al., "Tin dioxide nano-powders for gas sensor applications," in Materials Research Society Symposium - Proceedings, 1998, pp. 41-46.
[285]
H. Hofmann et al., "Potential of nanosized ceramic powder for functional applications," in Ceramic Engineering and Science Proceedings, 1997, pp. 687-694.
[286]
R. Houriet et al., "Growth kinetics of tin oxide from tin tetrachloride/ methanol complex," in Vide : Science, Technique et Applications, 1996, pp. 230-232.
Chapters in books
[287]
S. Sarkar et al., "Engineering FRET-based solar cells : Manipulation of energy and electron transfer processes in a light harvesting assembly," in High-Efficiency Solar Cells, : American Chemical Society (ACS), 2014, pp. 267-318.
Non-peer reviewed
Articles
[288]
G. Triantafyllou et al., "Editorial : Cleaning litter by developing and applying innovative methods in European seas," Frontiers in Marine Science, vol. 10, 2023.
[289]
K. Saoud, R. Al Soubaihi and J. Dutta, "Self-sustaining and hysteresis behavior of low-temperature CO oxidation on mesoporous Pd/SiO2 aerogel s catalyst under dynamics conditions," Abstracts of Papers of the American Chemical Society, vol. 256, 2018.
[290]
M. Al-Hinai et al., "Modification of blended polyethersulfone membranes by in-situ growth of zinc oxide nanostructures for prevention of biofouling during water treatment," Abstracts of Papers of the American Chemical Society, vol. 251, 2016.
Conference papers
[291]
P. Loiko et al., "Oriented ZnO Nanorods: A Novel Saturable Absorber for Lasers at 1-2 μm," in 2017 European Conference on Lasers and Electro-Optics and European Quantum Electronics Conference, 2017.
Books
[292]
S. Kumar, A. Mukherjee and J. Dutta, Biopolymer-Based Food Packaging : Innovations and Technology Applications. Wiley, 2022.
[293]
M. R. Viswanathan et al., Nanostructured Materials for Sustainable Energy and Environmental Remediation. IOP Publishing, 2022.
Chapters in books
[294]
S. Kumar et al., "An overview of natural biopolymers in food packaging," in Biopolymer-Based Food Packaging : Innovations and Technology Applications, : Wiley, 2022, pp. 1-28.
[295]
S. Kumar, A. Mukherjee and J. Dutta, "Preface," in Biopolymer-Based Food Packaging : Innovations and Technology Applications, : Wiley, 2022.
[296]
W. S. Hamd and J. Dutta, "Heterogeneous photo-Fenton reaction and its enhancement upon addition of chelating agents," in Nanomaterials for the Detection and Removal of Wastewater Pollutants, : Elsevier, 2020, pp. 303-330.
[297]
S. Baruah, M. N. Khan and J. Dutta, "Nanotechnology in Water Treatment," in Pollutants in Buildings, Water and Living Organisms, : Springer International Publishing, 2015, pp. 51-84.
[298]
M. A. Mahmood et al., "Microbial pathogen inactivation using heterogeneous photocatalysis," in Environmental Chemistry for a Sustainable World, : Springer Berlin/Heidelberg, 2012, pp. 511-541.
[299]
S. Baruah, J. Dutta and G. L. Hornyak, "Poor Manâs Nanotechnologyâ-From the Bottom Up (Thailand)," in Nanotechnology and Global Sustainability, : CRC Press, 2011.
[300]
V. Renugopalakrishnan et al., "Nanomaterials for energy conversion applications," in Nanomaterials for Energy Conversion Applications : Biosolar and biofuel cells, : American Scientific Publishers, 2009, pp. 155-178.
Collections
[301]
"Nanotechnology in environmental protection and pollution," , Elsevier, Science and Technology of Advanced Materials, 2005.
Other
[302]
[303]
[304]
J. Nordstrand and J. Dutta, "Ohmic charging in capacitive deionization : efficient water desalination using capacitive spacers," (Manuscript).
[305]
J. Nordstrand, L. Zuili and J. Dutta, "Three-Dimensional Model for Capacitive Deionization," (Manuscript).
[306]
J. Nordstrand, E. Toledo Carrillo and J. Dutta, "Tuning the cation/anion adsorption balance with a multi-electrode capacitive-deionization process," (Manuscript).
Patents
Patents
[307]
J. Dutta and K. L. Kunjali, "Device for capacitive deionization of aqueous media and method of manufacturing such a device," se 540976 (2019-02-12), 2019.
[308]
J. Dutta and K. L. Kunjali, "DESALINATION DEVICE AND METHOD OF MANUFACTURING SUCH A DEVICE," se WO/2018/234386 (2018-12-27), 2018.
[309]
J. Dutta and K. L. Kunjali, "Device for capacitive deionization of aqueous media and method of manufacturing such as a device," se 540976 C2 (2019-02-12), 2017.
[310]
J. Dutta, "Three-electrode structure for capacitive deionization desalination," us US9751779B1 (2017-05-09), 2016.
[311]
C. Widmer and J. Dutta, "Method for the production of otoplastics and corresponding otoplastic," EP 1295509B1 (2004-04-21), 2000.
Latest sync with DiVA:
2024-11-17 01:50:29