Publikationer av Ellen Bergseth
Refereegranskade
Artiklar
[1]
R. Hjelm et al., "A multi-perspective method for gear efficiency and contact analysis," Results in Engineering (RINENG), vol. 20, 2023.
[2]
G. Sannellappanavar, E. Lundberg och E. Bergseth, "Towards real time automated early gear failure detection," Tribologia, vol. 39, no. 3-4, s. 42-44, 2022.
[3]
E. Bergstedt et al., "Gear micropitting initiation of ground and superfinished gears : Wrought versus pressed and sintered steel," Tribology International, vol. 160, 2021.
[4]
E. Bergseth, Y. Zhu och A. Söderberg, "Study of Surface Roughness on Friction in Rolling/Sliding Contacts : Ball-on-Disc Versus Twin-Disc," Tribology letters, vol. 68, no. 2, 2020.
[5]
E. Bergseth et al., "A Wear Detection Parameter for the Wheel–Rail Contact Based on Emitted Noise," Tribology Transactions, vol. 62, no. 3, s. 496-503, 2019.
[6]
Y. Lyu et al., "A pin-on-disc study on the tribology of cast iron, sinter and composite railway brake blocks at low temperatures," Wear, s. 48-52, 2019.
[7]
E. Bergseth et al., "Effects of thrust washer bearing surface characteristics on planetary gear train wear," Wear, vol. 432-433, 2019.
[8]
Y. Lyu et al., "Effect of humidity on the tribological behaviour and airborne particle emissions of railway brake block materials," Tribology International, vol. 118, s. 360-367, 2018.
[9]
X. Li, U. Olofsson och E. Bergseth, "Pin-on-Disc Study of Tribological Performance of Standard and Sintered Gear Materials Treated with Triboconditioning Process: Pre-treatment by Pressure-induced Tribo-film formation," Tribology Transactions, vol. 60, no. 1, s. 47-57, 2017.
[10]
M. Höjer et al., "A noise related track maintenance tool for severe wear detection of wheel-rail contact," Civil-Comp Proceedings, vol. 110, 2016.
[11]
Y. Lyu, E. Bergseth och U. Olofsson, "Open System Tribology and Influence of Weather Condition," Scientific Reports, vol. 6, 2016.
[12]
Y. Lyu, E. Bergseth och U. Olofsson, "The effect of Subzero temperature and snow on the tribology of wheel-rail contact," Civil-Comp Proceedings, vol. 110, 2016.
[13]
Y. Lyu et al., "On the relationships among wheel–rail surface topography, interface noise and tribological transitions," Wear, vol. 338-339, s. 36-46, 2015.
[14]
E. Bergseth et al., "Effect of Gear Surface and Lubricant Interaction on Mild Wear," Tribology letters, vol. 48, no. 2, s. 183-200, 2012.
[15]
E. Bergseth, S. Sjöberg och S. Björklund, "Influence of real surface topography on the contact area ratio in differently manufactured spur gears," Tribology International, vol. 56, s. 72-80, 2012.
[16]
E. Bergseth och S. Björklund, "Logarithmical Crowning for Spur Gears," Strojniski vestnik, vol. 56, no. 4, s. 239-244, 2010.
[17]
E. Bergseth, M. Torbacke och U. Olofsson, "Wear in environmentally adapted lubricants with AW technology," Journal of Synthetic Lubrication, vol. 25, no. 4, s. 137-158, 2008.
Konferensbidrag
[18]
U. Olofsson et al., "Nanoparticle emissions from the transport sector: health and policy impacts - the nPETS concept," i 2022 Conference Proceedings Transport Research Arena, TRA Lisbon 2022, 2023, s. 248-255.
[19]
E. Bergseth et al., "A note on the pitting life of IQ steel versus 16MnCr5 steel in a back to back gear test rig," i 18th Nordic Symposium on Tribology (NORDTRIB 2018) in Uppsala on 18 - 21 June 2018, 2018.
[20]
E. Bergseth et al., "EXPERIENCES OF STUDYING GEAR TRIBOLOGY IN A FZG TEST SET-UP," i The 18th Nordic Symposium on Tribology – NORDTRIB 2018 18-21 June 2018, Uppsala University, Uppsala, Sweden, 2018.
[21]
Y. Lyu, E. Bergseth och U. Olofsson, "TRIBOLOGY OF THREE RAILWAY BRAKE BLOCK MATERIALS TESTED AGAINST RAILWAYWHEEL AT LOW TEMPERATURES," i The 18th Nordic Symposium on Tribology – NORDTRIB 201818-21 June 2018, Uppsala University, Uppsala, Sweden, 2018.
[22]
K. Mahmood Reza et al., "Assembly Feature Data Instance Modeling : Prototype Implementation and Outputs," i 2017 INTERNATIONAL CONFERENCE ON MECHANICAL, SYSTEM AND CONTROL ENGINEERING (ICMSC), 2017, s. 343-347.
[23]
E. Bergseth et al., "EFFECTS OF THRUST WASHER BEARING SURFACE CHARACTERISTICS ON PLANETARY GEAR TRAIN WEAR," i 44th Leeds-Lyon Symposium on Tribology - September 4-6, 2017, Lyon, France, 2017.
[24]
E. Bergseth et al., "Study of surface roughness and surface orientation on friction in rolling/sliding contacts: barrel-on-disc versus twin-disc," i Sixth World Tribology Congress (WTC 2017), Beijing, China, September 17-22, 2017, 2017.
[25]
Y. Lyu et al., "Development of a noise related track maintenance tool," i 22nd International Congress on Sound and Vibration, ICSV 2015, 2015.
[26]
E. Bergseth et al., "Effect of gear surface and lubricant interaction on mild wear," i International Tribology Congress - ASIATRIB 2010 Perth, Australia, 5-9 December 2010, 2010.
[27]
S. Sjöberg, E. Bergseth och S. Björklund, "Influence of real surface topography on the contact area ratio in differently manufactured spur gears," i Proceedings of Tribology 2008 : Surface Engineering of Automotive Powertrains for Environmentally Friendly Transport, 2008.
[28]
E. Bergseth, M. Torbacke och U. Olofsson, "Wear in environmentally adapted lubricants with AW/EP technology," i Tech. Akad. Esslingen Int. Tribol. Colloq. Proc., 2008.
Icke refereegranskade
Konferensbidrag
[29]
Avhandlingar
[30]
E. Bergseth, "On tribological design in gear tooth contacts," Doktorsavhandling Stockholm : KTH Royal Institute of Technology, Trita-MMK, 2012:18, 2012.
[31]
E. Bergseth, "Influence of surface topography and lubricant design in gear contacts," Licentiatavhandling , TRITA-MMK, 2009:18.
Rapporter
[32]
E. Bergseth et al., "Investigation of pitting resistance in ultra clean IQ-Steel vs commonly used conventional steel; 158Q vs 16MnCr5 : Back-to-back pitting tests," Stockholm : KTH Royal Institute of Technology, TRITA-MMK, 2015:07, 2015.
[33]
E. Bergseth, "Influence of gear surface roughness, lubricant viscosity and quality level on ISO 6336 calculation of surface durability," Stockholm : KTH Royal Institute of Technology, Trita-MMK, 2009:17, 2009.
Övriga
[34]
M. Kumar et al., "Assembly of joints using threaded fasteners: Influence of fastener coating and joint surface topography," (Manuskript).
[35]
E. Bergseth, Y. Zhu och U. Olofsson, "Study of surface roughness and surface orientation onfriction in rolling/sliding contacts : barrel-on-disc versustwin-disc," (Manuskript).
Senaste synkning med DiVA:
2024-11-21 00:28:31