The course covers process technologies that are used in micro- and nanofabrication of devices and systems on wafers. Applications include all technologies that are based on wafer scale fabrication such as integrated circuits, micro-electro-mechanical systems and optical devices. The basic unit processes deposition, patterning, etching, doping and heat treatment are covered, followed by process integration to build complex devices including statistical process control and yield models. Moore's law and the basic economics for integrated circuits are covered and examplified by reviewing the state-of-the art process technology nodes. Hands-on experience of fabricating devices in a clean room (Electrum Laboratory) and use a number of unit processes included in the course.

The course gives the student basic understanding of the sustainability aspects in integrated circuit fabrication.

After the course, the student should be able to

• discuss and review unit manufacturing processes for micro- and nanofabrication on wafers
• discuss and review Moore's law and advanced process technologies
• discuss and review examples of process integration
• use models and calculate relevant characteristics and conditions in process technology
• fabricate devices in a clean room.

16 lectures
1 laboration in Electrum Laboratory

Lecture 1: Introduction to course and subject, review of CMOS circuit and technology (Chapter 1)
Lecture 2: Planar technology, key process innovations, Moore's law, KTH FDSOI technology (Chapter 2)
Lecture 3: Crystals, defects, doping and semiconductor wafers (Chapter 3)
Lecture 4: Semiconductor Manufacturing, Cleanrooms and Yield (Chapter 4)
Lecture 5: Thermal oxidation of Si (Chapter 6)
Lecture 6: Chemical Vapour Deposition and Physical Vapour Deposition (Chapter 10)
Lecture 7: Lithography 1 (Chapter 5.1 - 5.6)
Lecture 8: Wet etching and plasma etching (Chapter 9.1 - 9.10)
Lecture 9: Diffusion and doping (Chapter 7)
Lecture 10: Ion Implantation and Rapid Thermal Annealing (Chapter 8)
Lecture 11: Lithography (Chapter 5.7-5.8) and DWL, Lab1 and Lab2 presentations
Lecture 12: Interconnect technologies (Chapter 11) and Chemical Mechanical Planarization (Chapter 9.11)
Lecture 13: ALD (10.2.7) and ALE (9.10), Lab3 and Lab4 presentation
Lecture 14: Process Integration, Guest Lecture
Lecture 15: Process Integration, Lab5 and Lab 6 presentation
Lecture 16: Process Integration
Lecture 17: Summary and Future technologies

Courses on BSc level or higher in solid-state physics and semiconductor devices.

Integrated Circuit Fabrication, James D. Plummer and Peter B. Griffin, Cambridge University Press, ISBN 978-1-009-30358-3

Students at KTH with a permanent disability can get support during studies from Funka:

Funka - compensatory support for students with disabilities

A, B, C, D, E, FX, F

• LAB1 - Lab, 1.0 credits, Grading scale: P, F
• TENM - Oral exam, 4.0 credits, Grading scale: A, B, C, D, E, FX, F
• TENS - Written exam, 2.5 credits, Grading scale: A, B, C, D, E, FX, F

Based on recommendation from KTH’s coordinator for disabilities, the examiner will decide how to adapt an examination for students with documented disability.

The examiner may apply another examination format when re-examining individual students.

The oral examination is conducted at Electrumbuilding, Level 3, room Commodore and 2 students participate in an examination slot of 60 min.
Students answer 7 questions each that are selected by Professor Mikael Östling.
Each question should be answered within 4 minutes (4x7=28 min).
Each question can give a maximum of 3 points.
As a general guide, it is required by the student to connect his/her answer to other areas covered in the course through a discussion with the examiner to acquire the highest 3 points on a specific question.
The grade on the oral examiantion will be based on the summation of the points achieved by the student on each question. The points for a specific grade will be as follow:
A = 20-21 points B = 17-19 points C = 13-16 points D = 11-12 points E = 9-10 points F < 9 points

The written examination is an home examination and consist of 6 questions.
Each question can give maximum 4 points.
The grade on the written examiantion will be based on the summation of the points achieved by the student on each question. The points for a specific grade will be as follow:
A = 22-24 points B = 19-21 points C = 15-18 points D = 12-14 points E = 9-11 points F < 9 points

The grade on the course will be a weighted summation from the written and oral examination.

• All members of a group are responsible for the group's work.
• In any assessment, every student shall honestly disclose any help received and sources used.
• In an oral assessment, every student shall be able to present and answer questions about the entire assignment and solution.