Study year 3

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

For a Degree in Mechanical Engineering must one of the following Technical profiles be chosen and courses corresponding to at least 18 credits  during study year 4-5:n
One of the Technical Profiles must be chosen:

• Technical profile Construction

        Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
         MF2101 Machine Design 6 credits
         MF2102 Machine Design Project 6 credits
         MF2010 Component Design 6 credits
         MF2011 Systems Engineering 9 credits
         MF2019 CAD 3D-modelling and Visualization 6 credits *
         MF2024 Robust and Probabilistic Design 6 credits
      * will be able to study in period 2 and 4

• Technical profile Energy
  All courses within the Technical profile must be chosen 
  MJ2508 Energy systems for Sustainible Development 6 credits
  MJ2411 Renewable Energy Technology 6 credits *
  MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
  *can also be chosen study year 5

• Technical profile Production
  MG2029  Production Engineering - Planning and Control 6 credits
  (MG1024 Production in study year 3, is the eligibility course for MG2029)
  
  One of the following two courses must be chosen:
  MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
  MG2130  Modelling and Simulation of Industrial Processes 9 credits
  As well as one of the following courses must be chosen, either study year 4 or 5:
  MG2009 Advanced Manufacturing Technology 6 credits
  MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
  MG2110 Advanced Metrology 9 credits
  MG2122 Advanced CAD 6 credits *
  MG2135 PLM - Product Lifecycle Management 9 credits
  MG2036 Computer Aided Manufacturing - CAM 6 credits
  MG2038 Digital Factories 6 credits **
  MG2010 Modern Industrial Metrology 6 credits *
  * MG2028 prerequisites
  ** MG2130 prerequisites

• Technical profile Solid Mechanics 
  
  SE1025 FEM for Engineering Applications 6 credits 
  
  One of the following two courses must be chosen:
  SE2126 Material Mechanics 9 credits
  SE2132 Applied Elasticity with FEM 9 credits
  
  As well as one of the following courses must be chosen:
  SE2860 FEM Modelling 8 credits
  SE2137 Fatigue 6 credits
  SE2139 Fracture Mechanics 6 credits 
  SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
  SE2121 Introduction to Biomechanics 9 credits

Students on an international profile shall during year 3 must follow one of the profiles included in the regular education plan for CMAST year 3 with the following exceptions:

• SF1915 Probability Theory and Statistics are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• MH1004 Engineering Materials are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• If MG1026 Manufacturing technology not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MF1016 Electrical Engineering Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MJ1112 Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• Degree Project in Mechanical Engineering First Cycle shall be done either on KTH or on the Exchange University

NOTICE! The Courses for International profile year 3 are nor adapted to the Schedule at KTH because the students spend the Academic Year at an Exchage University

Students on an international profile shall during year 3 must follow one of the profiles included in the regular education plan for CMAST year 3 with the following exceptions:

• SF1915 Probability Theory and Statistics are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• MH1004 Engineering Materials are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• If MG1026 Manufacturing technology not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MF1016 Electrical Engineering Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MJ1112 Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• Degree Project in Mechanical Engineering First Cycle shall be done either on KTH or on the Exchange University

NOTICE! The Courses for International profile year 3 are nor adapted to the Schedule at KTH because the students spend the Academic Year at an Exchage University

Students on an international profile shall during year 3 must follow one of the profiles included in the regular education plan for CMAST year 3 with the following exceptions:

• SF1915 Probability Theory and Statistics are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• MH1004 Engineering Materials are not mandatory for CMAST-INT, but can be included as a Elective Course in the Degree
• If MG1026 Manufacturing technology not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MF1016 Electrical Engineering Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• If MJ1112 Applied Thermodynamics not been chosen during year 2 shall the Course be read during the Exchange in year 3
• Degree Project in Mechanical Engineering First Cycle shall be done either on KTH or on the Exchange University

NOTICE! The Courses for International profile year 3 are nor adapted to the Schedule at KTH because the students spend the Academic Year at an Exchage University

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

Only one of the courses SG1217 and SG1220 can be chosen

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

 A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

For a Degree in Mechanical Engineering must one of the following Technical profiles be chosen and courses corresponding to at least 18 credits  during study year 4-5:n

• Technical profile Production and Energy
  All of the courses must be chosen within the Technical Profile 
  MG2130 Modelling and Simulation of Industrial Processes 9 credits
  MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits

• Technical profile Solid Mechanics 
  
  SE1025 FEM for Engineering Applications 6 credits
  One of the following two courses must be chosen:
  SE2126 Material Mechanics 9 credits
  SE2132 Applied Elasticity with FEM 9 credits
  
  As well as one of the following courses must be chosen:
  SE2860 FEM Modelling 8 credits
  SE2137 Fatigue 6 credits
  SE2139 Fracture Mechanics 6 credits
  SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
  SE2121 Introduction to Biomechanics 9 credits

• Technical profile Construction
  
  Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
  MF2101 Machine Design 6 credits
  MF2102 Machine Design Project 6 credits
  MF2010 Component Design 6 credits
  MF2011 Systems Engineering 9 credits
  MF2019 CAD 3D-modelling and Visualization 6 credits *
  MF2024 Robust and Probabilistic Design 6 credits
  * will be able to study in period 2 and 4

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

Only one of the courses SG1217 and SG1220 can be chosen

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

For a Degree in Mechanical Engineering must one of the following Technical profiles be chosen and courses corresponding to at least 18 credits  during study year 4-5:n
One of the Technical Profiles must be chosen:

• Technical profile Construction
  Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
  MF2101 Machine Design 6 credits
  MF2102 Machine Design Project 6 credits
  MF2010 Component Design 6 credits
  MF2011 Systems Engineering 9 credits
  MF2019 CAD 3D-modelling and Visualization 6 credits *
  MF2024 Robust and Probabilistic Design 6 credits
  * will be able to study in period 2 and 4

• Technical profile Energy
  All courses within the Technical profile must be chosen: 
  
  MJ2508 Energy systems for Sustainible Development 6 credits
  MJ2411 Renewable Energy Technology 6 credits *
  MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
  *can also be chosen study year 5

• Technical profile Production
  MG2029  Production Engineering - Planning and Control 6 credits
  (MG1024 Production in study year 3, is the eligibility course for MG2029)
  
  One of the following two courses must be chosen:
  MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
  MG2130  Modelling and Simulation of Industrial Processes 9 credits
  As well as one of the following courses must be chosen, either study year 4 or 5:
  MG2009 Advanced Manufacturing Technology 6 credits
  MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
  MG2110 Advanced Metrology 9 credits
  MG2122 Advanced CAD 6 credits *
  MG2135 PLM - Product Lifecycle Management 9 credits
  MG2036 Computer Aided Manufacturing - CAM 6 credits
  MG2038 Digital Factories 6 credits **
  MG2010 Modern Industrial Metrology 6 credits *
  * MG2028 prerequisites
  ** MG2130 prerequisites

• Technical profile Solid Mechanics 
  SE1025 FEM for Engineering Applications 6 credits 
  
  One of the following two courses must be chosen:
  SE2126 Material Mechanics 9 credits
  SE2132 Applied Elasticity with FEM 9 credits
  
  As well as one of the following courses must be chosen:
  SE2860 FEM Modelling 8 credits
  SE2137 Fatigue 6 credits
  SE2139 Fracture Mechanics 6 credits 
  SE2134 Dynamic Problems in Solid Mechanics  7,5 credits
  SE2121 Introduction to Biomechanics 9 credits

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".

A degree project for Degree of Bachelor must be chosen during study year 3, independently of chosen masters programme.

The Degree projects, first cycle, that can be selected are available as conditional elective courses under the heading "General" - "General courses".