The following courses are part of study year four.
The course application codes and study periods are valid for the academic year 2025/2026. For other academic years, different application codes and study periods may apply
General Courses
Information is based upon the curriculum for academic year 2022/2023. Changes may occur.
During the fourth study year of the Degree Programme in Design and Product Realisation, a master's programme must be studied.
Information about which master's programme can be studied, can be found in the programme syllabus. Changes may occur.
For students who chooses to study the following master's programme:
Industrial Economics (TINEM)
it is required that a supplementary technical profil is read in order to obtain a Degree of Master of Science in Engineering.
The following technical profiles can be studied during study year 4-5 (ie during study year 1-2 of the master's programme):
- Engineering Design,
- Energy,
- Production,
- Solid Mechanics
Specialisations
Master, Industrial Management (INE)
Courses (INE)
CDEPR-students at Masters programme, Industrial Management (TINEM)
A technical profile specified within the study year plan for Degree Programme in Mechanical Engineering must be chosen
One of the following profiles can be chosen during study year 4-5:
- Technical profile Construction
Courses corresponding to at least 18 credits, listed below, shall be taken during study year 4-5:
MF2511 Machine Design Fundamentals 6 credits replace MF2101 Machine Design 6
MF2102 Machine Design Project 6 credits
MF2010 Component Design 6 credits
MF2522 Systems Engineering 6 credits Replace MF2011 Systems Engineering 9
MF2019 CAD 3D-modelling and Visualization 6 credits *
MF2024 Robust and Probabilistic Design 6 credits
* will be able to study in period 2 and 4
- Technical profile Energy
MJ2508 Energysystems for Sustaniable Development 6 credits - MJ2411 Renewable Energy Technology 6 credits *
MJ2380 Introduction to Energy Systems Analysis and Applications 9 credits
- Technical profile Production
MG2029 Production Engineering - Planning and Control 6 credits
(MG1024 Production in study year 3, is the eligibility course for MG2029)
One of the following two courses must be chosen:
MG2028 CAD and Other IT Tools in Industrial Processes 6 credits
MG2130 Modelling and Simulation of Industrial Processes 9 credits
As well as one of the following courses must be chosen, either study year 4 or 5:
MG2009 Advanced Manufacturing Technology 6 credits
MG2109 Advanced Manufacturing Technology, Extended Course 9 credits
MG2110 Advanced Metrology 9 credits
MG2022 Advanced CAD Modelling and Rapid Prototyping 6 credits *
MG2135 PLM - Product Lifecycle Management 9 credits
MG2036 Computer Aided Manufacturing - CAM 6 credits
MG2038 Digital Factories 6 credits **
MG2010 Modern Industrial Metrology 6 credits *
* MG2028 prerequisites
** MG2130 prerequisites
- Technical profile Solid Mechanics
SE1025 FEM for Engineering Applications 6 credits
One of the following two courses must be chosen:
SE2126 Material Mechanics 9 credits
SE2132 Applied Elasticity with FEM 9 credits
As well as one of the following courses must be chosen:
SE2860 FEM Modelling 8 credits
SE2137 Fatigue 6 credits
SE2139 Fracture Mechanics 6 credits
SE2134 Dynamic Problems in Solid Mechanics 7,5 credits
SE2121 Introduction to Biomechanics 9 credits
You need MG1024 Production for eligibility to the course MG2029 Production Engineering - Planning and Control, which is a mandatory course for students attending the Master's Programme Industrial Management (TINEM), Technical profile: Production
Course SE1025 FEM for Engineering Applications 6 credits must be chosen in year 3 for eligibility to all the courses in the profile Solid Mechanics
Conditionally elective courses
Course code and name | Appl.code | Scope | P1 | P2 | P3 | P4 |
---|---|---|---|---|---|---|
MF2024 Robust and Probabilistic DesignTechnical profile Construction | 50307 | 6.0 credits | 6.0 | |||
MF2511 Machine Design: FundamentalsTechnical profile Construction | 50773 | 6.0 credits | 6.0 | |||
MG2029 Production Engineering - Planning and ControlTechnical profile Production | 50862 | 6.0 credits | 6.0 | |||
MG2038 Digital FactoriesTechnical profile Production | 50867 | 6.0 credits | 6.0 | |||
SE2137 FatigueTechnical profile Solid Mechanics | 51594 | 6.0 credits | 6.0 | |||
MG2009 Advanced Manufacturing TechnologyTechnical profile Production | 50871 | 6.0 credits | 4.5 | 1.5 | ||
MG2028 CAD and Other IT Tools in Industrial ProcessesTechnical profile Production | 50864 | 6.0 credits | 1.5 | 4.5 | ||
MG2109 Advanced Manufacturing Technology, Extended CourseTechnical profile Production | 50865 | 9.0 credits | 4.5 | 4.5 | ||
MG2110 Advanced MetrologyTechnical profile Production | 50866 | 9.0 credits | 4.5 | 4.5 | ||
MJ2411 Renewable Energy TechnologyTechnical profile Energy | 50993 | 6.0 credits | 3.0 | 3.0 | ||
MJ2508 Energy Systems for Sustainable DevelopmentTechnical profile Energy | 50977 | 6.0 credits | 3.0 | 3.0 | ||
SE2126 Material MechanicsTechnical profile Solid Mechanics | 50792 | 9.0 credits | 4.5 | 4.5 | ||
SE2132 Applied Elasticity with FEMTechnical profile Solid Mechanics | 51573 | 9.0 credits | 4.5 | 4.5 | ||
MF2010 Component DesignTechnical profile Construction | 50531 | 6.0 credits | 6.0 | |||
MF2102 Machine Design Project CourseTechnical profile Construction | 50061 | 6.0 credits | 6.0 | |||
SE2860 FEM ModellingTechnical profile Solid Mechanics | 51570 | 8.0 credits | 8.0 | |||
MG2122 Advanced CADTechnical profile Production | 50855 | 6.0 credits | 3.0 | 3.0 | ||
MG2130 Modelling and Simulation of Industrial ProcessesTechnical profile Production | 50854 | 9.0 credits | 4.5 | 4.5 | ||
SE2139 Fracture MechanicsTechnical profile Solid Mechanics | 60452 | 6.0 credits | 6.0 | |||
MF2522 Systems EngineeringTechnical profile Construction | 60341 | 6.0 credits | 3.0 | 3.0 | ||
MG2135 PLM - Product Lifecycle ManagementTechnical profile Production | 60697 | 9.0 credits | 4.5 | 4.5 | ||
MJ2380 Introduction to Energy Systems Analysis and ApplicationsTechnical profile Energy | 60765 | 9.0 credits | 3.0 | 6.0 | ||
MF2019 CAD 3D-modelling and VisualizationTechnical profile Construction | 60588 | 6.0 credits | 6.0 | |||
MG2010 Modern Industrial MetrologyTechnical profile Production | 60700 | 6.0 credits | 6.0 | |||
MG2036 Computer Aided Manufacturing - CAMTechnical profile Production | 60701 | 6.0 credits | 6.0 | |||
SE2121 Introduction to BiomechanicsTechnical profile Solid Mechanics | 60652 | 9.0 credits | 9.0 | |||
SE2134 Dynamic Problems in Solid MechanicsTechnical profile Solid Mechanics | 61220 | 7.5 credits | 7.5 |