Publikationer av Per-Lennart Larsson
Refereegranskade
Artiklar
[1]
A. Lundkvist et al., "Discrete element modelling of the elastic-plastic and viscoelastic properties of a lithium-ion battery electrode layer," Powder Technology, vol. 443, s. 119873, 2024.
[2]
T. Fischer et al., "Micromechanical prediction of the elastic and plastic properties of sintered steels," Materials Science & Engineering : A, vol. 897, 2024.
[3]
A. Lundkvist, P.-L. Larsson och E. Olsson, "A discrete element analysis of the mechanical behaviour of a lithium-ion battery electrode active layer," Powder Technology, vol. 425, 2023.
[4]
H. Staf och P.-L. Larsson, "An Analysis of the Stress State in Powder Compacts during Unloading, Emphasizing the Influence from Different Frictional Models," Applied Sciences, vol. 13, no. 22, 2023.
[5]
L. Rosenblad et al., "An Experimental Investigation of the Solid State Sintering of Cemented Carbides Aiming for Mechanical Constitutive Modelling," Crystals, vol. 13, no. 6, 2023.
[6]
H. Staf et al., "On the Influence from Pressing Agent (PEG) on the Elastic and Plastic Mechanical Behavior of Hard Metal Powder Compacts," Crystals, vol. 13, no. 6, 2023.
[7]
P.-L. Larsson, "A General Approach to Determine the Constitutive Parameter Dependence of Global Quantities at Sharp Contact Testing of Rigid-Plastic Materials," LUBRICANTS, vol. 10, no. 6, s. 121, 2022.
[8]
H. Shariati et al., "A damage model for granite subjected to quasi-static contact loading," International Journal for Numerical and Analytical Methods in Geomechanics, vol. 46, no. 2, s. 374-391, 2022.
[9]
P. Forquin et al., "Investigation of the Mechanical Behaviour of Lingulid Sandstone Emphasising the Influence from Pre-Existing Structural Defects, Part 1 : Model Identification Based on Static Experiments," Applied Sciences, vol. 12, no. 21, s. 10806, 2022.
[10]
P. Forquin et al., "Investigation of the Mechanical Behaviour of Lingulid Sandstone Emphasizing the Influence from Pre-Existing Structural Defects-Part 2 : Dynamic Testing and Numerical Modelling," Applied Sciences, vol. 12, no. 22, s. 11621, 2022.
[11]
V. Gaisina et al., "On the mechanical behavior of sintered Astaloy-85Mo: Influence of porosity and sinter conditions," Materials Science & Engineering : A, vol. 841, s. 143052-143052, 2022.
[12]
L. Rosenblad et al., "Parametric dependency of a constitutive model describing solid state sintering of cemented carbides," Powder Technology, vol. 403, s. 117407, 2022.
[13]
H. Shariati et al., "Probing Constitutive Models of Bohus Granite with In Situ Spherical Indentation and Digital Volume Correlation," Rock Mechanics and Rock Engineering, vol. 55, no. 12, s. 7369-7386, 2022.
[14]
P. Gudmundson och P.-L. Larsson, "An analytic model for effective mechanical properties and local contact stresses in lithium-ion porous electrodes," Extreme Mechanics Letters, vol. 42, 2021.
[15]
K. Salmi et al., "Correlation Between Granule Strength and Green Strength at Compaction of Cemented Carbide Powder Materials," Journal of materials engineering and performance (Print), vol. 30, no. 12, s. 9078-9083, 2021.
[16]
C. F. O. Dahlberg, J. Faleskog och P.-L. Larsson, "Correlation of Global Quantities at Material Characterization of Pressure-Sensitive Materials Using Sharp Indentation Testing," LUBRICANTS, vol. 9, no. 3, 2021.
[17]
P.-L. Larsson, "On the Behavior of Mechanical Stress Fields at Indentation of Materials with Residual Stresses," Journal of materials engineering and performance (Print), vol. 30, no. 4, s. 2566-2573, 2021.
[18]
K. Salmi, H. Staf och P.-L. Larsson, "On the Relation Between Pressing Energy and Green Strength at Compaction of Hard Metal Powders," Journal of materials engineering and performance (Print), vol. 30, no. 4, s. 2545-2551, 2021.
[19]
M. Saadati, K. Weddfelt och P.-L. Larsson, "A Spherical Indentation Study on the Mechanical Response of Selected Rocks in the Range from Very Hard to Soft with Particular Interest to Drilling Application," Rock Mechanics and Rock Engineering, vol. 53, no. 12, s. 5809-5821, 2020.
[20]
H. Staf och P.-L. Larsson, "Correction to: On the Influence of Material Parameters in a Complex Material Model for Powder Compaction (Journal of Materials Engineering and Performance, (2016), 25, 10, (4408-4415), 10.1007/s11665-016-2294-y)," Journal of materials engineering and performance (Print), vol. 29, no. 3, 2020.
[21]
H. Staf och P.-L. Larsson, "Evaluation of an advanced powder-die frictional model," Powder Technology, vol. 363, s. 569-574, 2020.
[22]
H. Staf, E. Olsson och P.-L. Larsson, "Mechanical Characterization of PowderMaterials: A General Approach Detailedfor Cemented Carbides," Powder Technology, vol. 364, s. 531-537, 2020.
[23]
H. Shariati et al., "Study of Frictional Effects of Granite Subjected to Quasi-Static Contact Loading," Lubricants, vol. 8, no. 12, 2020.
[24]
P.-L. Larsson, "Determination of residual stresses utilizing the the variation of hardness at elastic-plastic indentation," Journal of Testing and Evaluation, vol. 47, no. 4, s. 3174-3184, 2019.
[25]
H. Staf et al., "Determining the density distribution in cemented carbide powder compacts using 3D neutron imaging," Powder Technology, vol. 354, s. 584-590, 2019.
[26]
H. Fadil et al., "Measurement of the viscoelastic properties of asphalt mortar and its components with indentation tests," International Journal on Road Materials and Pavement Design, 2019.
[27]
P.-L. Larsson, "On Plowing Frictional Behavior during Scratch Testing : A Comparison between Experimental and Theoretical/Numerical Results," Crystals, vol. 9, no. 1, 2019.
[28]
H. Shariati et al., "On the Inelastic Mechanical Behavior of Granite: Study Based on Quasi-oedometric and Indentation Tests," Rock Mechanics and Rock Engineering, vol. 52, no. 3, s. 645-657, 2019.
[29]
P.-L. Larsson, "Principal Stress Ratio Effect at Residual Stress Determination Utilizing the Variation of Indentation Hardness," Lubricants, vol. 7, no. 6, 2019.
[30]
P.-L. Larsson, "Representative Stress Correlation of Global Scratch Quantities at Scratch Testing : Experimental Verification," Crystals, vol. 9, no. 3, 2019.
[31]
M. Saadati, K. Weddfelt och P.-L. Larsson, "A Probabilistic Approach to Investigate the Size and Boundary Condition Effects on the Fracture Response of Brittle Materials Loaded in Diametral Compression," Journal of engineering materials and technology, vol. 140, no. 3, 2018.
[32]
H. Staf et al., "Determination of the Frictional Behavior at Compaction of Powder Materials Consisting of Spray-Dried Granules," Journal of materials engineering and performance (Print), vol. 27, no. 3, s. 1308-1317, 2018.
[33]
D. Jelagin et al., "Mechanical Characterization of Granite Rock Materials : On the Influence from Pre-Existing Defects," Journal of Testing and Evaluation, vol. 46, no. 2, s. 540-548, 2018.
[34]
H. Fadil, D. Jelagin och P.-L. Larsson, "On the Measurement of two Independent Viscoelastic Functions with Instrumented Indentation Tests," Experimental mechanics, vol. 58, no. 2, s. 301-314, 2018.
[35]
M. Saadati et al., "On the Mechanical Behavior of Granite Material With Particular Emphasis on the Influence From Pre-Existing Cracks and Defects," Journal of Testing and Evaluation, vol. 46, no. 1, s. 33-45, 2018.
[36]
P.-L. Larsson, "On the Variation of Hardness Due to Uniaxial and Equi-Biaxial Residual Surface Stresses at Elastic-Plastic Indentation," Journal of materials engineering and performance (Print), vol. 27, no. 6, s. 3168-3173, 2018.
[37]
H. Staf, E. F. Nyrot och P.-L. Larsson, "On the usage of a neutron source to determine the density distribution in compacted cemented carbide powder compounds," Powder Metallurgy, vol. 61, no. 5, s. 389-394, 2018.
[38]
C. Celma Cervera et al., "Contact-induced deformation and damage of rocks used in pavement materials," Materials & design, vol. 133, s. 255-265, 2017.
[39]
H. Staf et al., "On rate-dependence of hardmetal powder pressing of cutting inserts," Powder Metallurgy, vol. 60, no. 1, s. 7-14, 2017.
[40]
P.-L. Larsson, "On the Influence of Elastic Deformation for Residual Stress Determination by Sharp Indentation Testing," Journal of materials engineering and performance (Print), vol. 26, no. 8, s. 3854-3860, 2017.
[41]
P.-L. Larsson, "On the invariance of hardness at Vickers indentation of pre-stressed materials," Metals, vol. 7, no. 7, 2017.
[42]
K. Weddfelt, M. Saadati och P.-L. Larsson, "On the load capacity and fracture mechanism of hard rocks at indentation loading," International Journal of Rock Mechanics And Mining Sciences, vol. 100, s. 170-176, 2017.
[43]
P.-L. Larsson och E. Olsson, "Plastic zone size at sharp indentation contact of classical elastic-plastic materials : Behavior at linear strain hardening," Journal of Testing and Evaluation, vol. 45, no. 5, 2017.
[44]
E. Olsson och P. L. Larsson, "A unified correlation model describing global properties at elastoplastic sharp indentation contact," Tribology International, vol. 103, s. 252-260, 2016.
[45]
E. Olsson och P.-L. Larsson, "A unified model for the contact behaviour between equal and dissimilar elastic-plastic spherical bodies," International Journal of Solids and Structures, vol. 81, s. 23-32, 2016.
[46]
P.-L. Larsson, "Correlation of global quantities for material characterization by sharp indentation testing of elastoplastic materials," Journal of Testing and Evaluation, vol. 44, no. 6, s. 2293-2301, 2016.
[47]
H. Staf et al., "On the Influence of Material Parameters in a Complex Material Model for Powder Compaction," Journal of materials engineering and performance (Print), vol. 25, no. 10, s. 4408-4415, 2016.
[48]
M. Saadati et al., "On the Tensile Strength of Granite at High Strain Rates considering the Influence from Preexisting Cracks," Advances in Materials Science and Engineering, 2016.
[49]
P.-L. Larsson, "Plastic Zone Size at Sharp Indentation of Classical Elastic-Plastic Materials : Behavior at Ideally Plastic Hardening," Journal of engineering materials and technology, vol. 138, no. 1, 2016.
[50]
M. Saadati et al., "A numerical study of the influence from pre-existing cracks on granite rock fragmentation at percussive drilling," International Journal for Numerical and Analytical Methods in Geomechanics, vol. 39, no. 5, s. 558-570, 2015.
[51]
P.-L. Larsson och E. Olsson, "A numerical study of the mechanical behavior at contact between particles of dissimilar elastic-ideally plastic materials," Journal of Physics and Chemistry of Solids, vol. 77, s. 92-100, 2015.
[52]
D. C. Andersson, P. Lindskog och P.-L. Larsson, "Inverse modeling applied for material characterization of powder materials," Journal of Testing and Evaluation, vol. 43, no. 5, s. 1005-1019, 2015.
[53]
E. Olsson och P.-L. Larsson, "Micromechanical Investigation of the Fracture Behavior of Powder Materials," Powder Technology, vol. 286, 2015.
[54]
D. C. Andersson et al., "A Numerical Study of Material Parameter Sensitivity in the Production of Hard Metal Components Using Powder Compaction," Journal of materials engineering and performance (Print), vol. 23, no. 6, s. 2199-2208, 2014.
[55]
M. Saadati et al., "Granite rock fragmentation at percussive drilling - experimental and numerical investigation," International Journal for Numerical and Analytical Methods in Geomechanics, vol. 38, no. 8, s. 828-843, 2014.
[56]
P.-L. Larsson, "On the Determination of Biaxial Residual Stress Fields from Global Indentation Quantities," Tribology letters, vol. 54, no. 1, s. 89-97, 2014.
[57]
E. Olsson och P.-L. Larsson, "On the tangential contact behavior at elastic–plastic spherical contact problems," Wear, vol. 319, no. 1/2, s. 110-117, 2014.
[58]
E. Olsson och P. L. Larsson, "A numerical analysis of cold powder compaction based on micromechanical experiments," Powder Technology, vol. 243, s. 71-78, 2013.
[59]
P. Lindskog, D. C. Andersson och P.-L. Larsson, "An Experimental Device for Material Characterization of Powder Materials," Journal of Testing and Evaluation, vol. 41, no. 3, s. 504-516, 2013.
[60]
D. Jelagin och P.-L. Larsson, "Measurement of the Viscoelastic Properties of Bitumen Using Instrumented Spherical Indentation," Experimental mechanics, vol. 53, no. 7, s. 1233-1244, 2013.
[61]
D. Jelagin och P.-L. Larsson, "Nonlocal Frictional Effects at Indentation of Elastic Materials," Tribology letters, vol. 51, no. 3, s. 397-407, 2013.
[62]
E. Olsson och P.-L. Larsson, "On force-displacement relations at contact between elastic-plastic adhesive bodies," Journal of the mechanics and physics of solids, vol. 61, no. 5, s. 1185-1201, 2013.
[63]
P.-L. Larsson, "On representative stress correlation of global scratch quantities at scratch testing of elastoplastic materials," MATER DESIGN, vol. 49, s. 536-544, 2013.
[64]
E. Olsson och P.-L. Larsson, "On the Appropriate Use of Representative Stress Quantities at Correlation of Spherical Contact Problems," Tribology letters, vol. 50, no. 2, s. 221-232, 2013.
[65]
P.-L. Larsson, "On the correlation of scratch testing using separated elastoplastic and rigid plastic descriptions of the representative stress," Materials and Design, vol. 43, s. 153-160, 2013.
[66]
P.-L. Larsson och P. Blanchard, "On the invariance of hardness at sharp indention of materials with general biaxial residual stress fields," Materials & design, vol. 52, s. 602-608, 2013.
[67]
D. Jelagin och P.-L. Larsson, "On Indenter Boundary Effects at Elastic Contact," Journal of Mechanics of Materials and Structures, vol. 7, no. 2, s. 165-182, 2012.
[68]
A. Rydin och P.-L. Larsson, "On the Correlation Between Residual Stresses and Global Indentation Quantities : Equi-Biaxial Stress Field," Tribology letters, vol. 47, no. 1, s. 31-42, 2012.
[69]
P.-L. Larsson och P. Blanchard, "On the correlation between residual stresses and global indentation quantities : Numerical results for general biaxial stress fields," Materials and Design, vol. 37, s. 435-442, 2012.
[70]
E. Olsson och P.-L. Larsson, "On the effect of particle size distribution in cold powder compaction," Journal of applied mechanics, vol. 79, no. 5, s. 051017, 2012.
[71]
O. Skrinjar och P.-L. Larsson, "Size Ratio Effects on Particle Contact Evolution at Uniaxial Powder Compaction," Particulate Science and Technology, vol. 30, no. 4, s. 364-377, 2012.
[72]
O. Skrinjar och P.-L. Larsson, "A micromechanical analysis of local contact at die compaction of powder materials," INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, vol. 102, no. 3, s. 317-322, 2011.
[73]
P.-L. Larsson, "On the mechanical behavior at sharp indentation of materials with compressive residual stresses," MATER DESIGN, vol. 32, no. 3, s. 1427-1434, 2011.
[74]
O. Skrinjar och P.-L. Larsson, "On the micromechanics of die compaction of composite powder materials," INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, vol. 102, no. 4, s. 406-412, 2011.
[75]
F. Wredenberg och P. L. Larsson, "On the stability of delamination growth at scratching of thin film structures," JCT Research, vol. 8, no. 6, s. 707-717, 2011.
[76]
Y. Kamran och P.-L. Larsson, "Second-order effects at microindentation of elastic polymers using sharp indenters," Materials and Design, vol. 32, no. 6, s. 3645-3653, 2011.
[77]
F. Wredenberg och P.-L. Larsson, "On scratch testing of pressure-sensitive polymeric coatings," JCT Research, vol. 7, no. 3, s. 279-290, 2010.
[78]
F. Wredenberg och P.-L. Larsson, "On the effect of substrate deformation at scratching of soft thin film composites," International Journal of Mechanical Sciences, vol. 52, no. 7, s. 1008-1014, 2010.
[79]
D. C. Andersson et al., "On the influence from punch geometry on the stress distribution at powder compaction," Powder Technology, vol. 202, no. 1-3, s. 78-88, 2010.
[80]
F. Wredenberg och P.-L. Larsson, "On the stress distribution at scratching of thin film structures," JCT Research, vol. 7, no. 5, s. 623-635, 2010.
[81]
F. Wredenberg och P.-L. Larsson, "Delamination of thin coatings at scratching : Experiments and numerics," Journal of Mechanics of Materials and Structures, vol. 4, no. 6, s. 1041-1062, 2009.
[82]
F. Wredenberg och P.-L. Larsson, "Scratch testing of metals and polymers : Experiments and numerics," Wear, vol. 266, no. 1-2, s. 76-83, 2009.
[83]
D. Jelagin och P.-L. Larsson, "Hertzian Fracture at Finite Friction : A Parametric Study," Wear, vol. 265, no. 5-6, s. 840-848, 2008.
[84]
D. Jelagin och P.-L. Larsson, "On indentation and initiation of fracture in glass," International Journal of Solids and Structures, vol. 45, no. 10, s. 2993-3008, 2008.
[85]
P.-L. Larsson och F. Wredenberg, "On indentation and scratching of thin films on hard substrates," Journal of Physics D : Applied Physics, vol. 41, no. 7, s. 074022, 2008.
[86]
P.-L. Larsson, "Similarity methods for analysing indentation contact problems - Advantages and disadvantages," Journal of Materials Processing Technology, vol. 202, no. 1-3, s. 15-21, 2008.
[87]
P. Fredriksson och P.-L. Larsson, "Wedge indentation of thin films modelled by strain gradient plasticity," International Journal of Solids and Structures, vol. 45, no. 21, s. 5556-5566, 2008.
[88]
P.-L. Larsson, "Influence from the inclined angle of the indenter for determination of residual stress and strain fields by sharp indentation testing," Journal of Materials Processing Technology, vol. 184, no. 03-jan, s. 372-378, 2007.
[89]
O. Skrinjar, P.-L. Larsson och B. Storåkers, "Local contact compliance relations at compaction of composite powders," Journal of applied mechanics, vol. 74, no. 1, s. 164-168, 2007.
[90]
O. Skrinjar och P.-L. Larsson, "On the local contact behaviour in regular lattices of composite powders," Journal of Materials Processing Technology, vol. 184, no. 1-3, s. 312-318, 2007.
[91]
F. Wredenberg och P.-L. Larsson, "On the numerics and correlation of scratch testing," Journal of Mechanics of Materials and Structures, vol. 2, no. 3, s. 573-594, 2007.
[92]
P.-L. Larsson, "Modelling of sharp indentation experiments : some fundamental issues," Philosophical Magazine, vol. 86, no. 33-35, s. 5155-5177, 2006.
[93]
C. Barbier, P.-L. Larsson och S. Östlund, "On the effect of high anisotropy at folding of coated papers," Composite structures, vol. 72, no. 3, s. 330-338, 2006.
[94]
C. Barbier, P.-L. Larsson och S. Östlund, "Numerical investigation of folding of coated papers," Composite structures, vol. 67, no. 4, s. 383-394, 2005.
[95]
C. Barbier, P.-L. Larsson och S. Östlund, "On dynamic effects at folding of coated papers," Composite structures, vol. 67, no. 4, s. 395-402, 2005.
[96]
C. Barbier et al., "On material characterization of paper coating materials by microindentation testing," Journal of Coatings Technology Research, vol. 2, no. 6, s. 463-471, 2005.
[97]
O. Skrinjar och P.-L. Larsson, "Cold compaction of composite powders with size ratio," Acta Materialia, vol. 52, no. 7, s. 1871-1884, 2004.
[98]
B. Storåkers, P.-L. Larsson och C. Rohart, "On delamination growth in shallow shells," Journal of applied mechanics, vol. 71, no. 2, s. 247-254, 2004.
[99]
O. Skrinjar och P.-L. Larsson, "On discrete element modelling of compaction of powders with size ratio," Computational materials science, vol. 31, s. 131-146, 2004.
[100]
P.-L. Larsson, "On the mechanical behavior of global parameters in material characterization by sharp indentation testing," Journal of Testing and Evaluation, vol. 32, no. 4, s. 310-321, 2004.
[101]
C. L. Eriksson, P.-L. Larsson och D. J. Rowciffe, "Strain-hardening and residual stress effects in plastic zones around indentations," Materials Science & Engineering : A, vol. 340, no. 02-jan, s. 193-203, 2003.
[102]
P.-L. Larsson och I. R. M. Peterson, "Evaluation of sharp indentation testing of thin films and ribbons on hard substrates," Journal of Testing and Evaluation, vol. 30, no. 1, s. 64-73, 2002.
[103]
C. Barbier, P.-L. Larsson och S. Östlund, "Experimental investigation of damage at folding of coated papers," Nordic Pulp & Paper Research Journal, vol. 17, no. 1, s. 34-38, 2002.
[104]
H. Oberg, P.-L. Larsson och O. Magnius, "An instrumented microindentation testing device," Journal of Testing and Evaluation, vol. 29, no. 1, s. 50-59, 2001.
[105]
P.-L. Larsson, "Investigation of sharp contact at rigid-plastic conditions," International Journal of Mechanical Sciences, vol. 43, no. 4, s. 895-920, 2001.
[106]
S. Carlsson och P.-L. Larsson, "On the determination of residual stress and strain fields by sharp indentation testing. Part I : Theoretical and numerical analysis," Acta Materialia, vol. 49, no. 12, s. 2179-2191, 2001.
[107]
S. Carlsson och P.-L. Larsson, "On the determination of residual stress and strain fields by sharp indentation testing. Part II : Experimental investigation," Acta Materialia, vol. 49, no. 12, s. 2193-2203, 2001.
[108]
S. Carlsson, S. Biwa och P.-L. Larsson, "On frictional effects at inelastic contact between spherical bodies," International Journal of Mechanical Sciences, vol. 42, no. 1, s. 107-128, 2000.
[109]
S. Carlsson och P.-L. Larsson, "On Microindentation of Viscoelastic Polymers," Polymer testing, vol. 17, no. 1, s. 49-75, 1998.
[110]
P.-L. Larsson och A. E. Giannakopoulos, "Tensile stresses and their implication to cracking at pyramid indentation of pressure-sensitive hard metals and ceramics," Journal of Materials Science and Engineering : A, vol. 254, no. 1-2, s. 268-281, 1998.
[111]
A. Giannakopoulos och P.-L. Larsson, "Analysis of pyramid indentation of pressure-sensitive hard metals and ceramics," Mechanics of materials, vol. 25, no. 1, s. 1-35, 1997.
[112]
P.-L. Larsson, "On creep deformation at plane contact problems," Cold Regions Science and Technology, vol. 26, no. 1, s. 67-82, 1997.
[113]
B. Storåkers, S. Biwa och P.-L. Larsson, "Similarity analysis of inelastic contact," International Journal of Solids and Structures, vol. 34, no. 24, s. 3061-3083, 1997.
[114]
P.-L. Larsson et al., "Analysis of Berkovich indentation," International Journal of Solids and Structures, vol. 33, no. 2, s. 221-248, 1996.
[115]
P.-L. Larsson, S. Biwa och B. Storåkers, "Analysis of cold and hot isostatic compaction of spherical particles," Acta Materialia, vol. 44, no. 9, s. 3655-3666, 1996.
[116]
F. Hild, P.-L. Larsson och F. A. Leckie, "Localization due to damage in two-direction fiber-reinforced composites," Journal of applied mechanics, vol. 63, no. 2, s. 321-325, 1996.
[117]
A. Giannakopoulos, P.-L. Larsson och R. Vestergaard, "Analysis of Vickers Indentation," International Journal of Solids and Structures, vol. 31, no. 19, s. 2679-2708, 1994.
[118]
B. Storåkers och P.-L. Larsson, "On Brinell and Boussinesq indentation of creeping solids," Journal of the mechanics and physics of solids, vol. 42, no. 2, s. 307-332, 1994.
[119]
F. Hild, P.-L. Larsson och F. Leckie, "Uncoupled and coupled approaches to predict macrocrack initiation in fiber reinforced ceramic matrix composites," Composite structures, vol. 29, no. 4, s. 365-377, 1994.
[120]
F. Hild, P.-L. Larsson och F. Leckie, "Localization due to damage in fiber-reinforced composites," International Journal of Solids and Structures, vol. 29, no. 24, s. 3221-3238, 1992.
[121]
P.-L. Larsson och F. Leckie, "Plane strain delamination growth in composite panels," Composite structures, vol. 20, no. 3, s. 175-184, 1992.
[122]
P.-L. Larsson, "On delamination buckling and growth in circular and annular orthotropic plates," International Journal of Solids and Structures, vol. 27, no. 1, s. 15-28, 1991.
[123]
P.-L. Larsson, "On multiple delamination buckling and growth in composite plates," International Journal of Solids and Structures, vol. 27, no. 13, s. 1623-1637, 1991.
[124]
P.-L. Larsson, "On buckling of orthotropic stretched plates with circular holes," Composite structures, vol. 11, no. 2, s. 121-134, 1989.
[125]
P.-L. Larsson, "On buckling of orthotropic compressed plates with circular holes," Composite structures, vol. 7, no. 2, s. 103-121, 1987.
Konferensbidrag
[126]
L. Rosenblad et al., "Constitutive Modelling Of Solid State Sintering Of Cemented Carbides," i World PM 2022 Congress Proceedings, 2022.
[127]
V. Gaisina et al., "An experimental investigation of the mechanical behavior of sintered Astaloy™ 85 Mo," i Proceedings - Euro PM2020 Congress and Exhibition, 2020.
[128]
H. Shariati, M. Saadati och P.-L. Larsson, "Inelastic mechanical behavior of granite under spherical indentation loading condition with emphasis on a criteria for damage description," i Rock Dynamics Summit - Proceedings of the 2019 Rock Dynamics Summit, RDS 2019, 2019, s. 208-211.
[129]
H. Staf et al., "Numerical implementation of an advanced powder-die frictional model," i Euro PM 2019 Congress and Exhibition, 2019.
[130]
P. L. Larsson och E. Olsson, "Elastic-plastic contact between hard metal particles," i Key Engineering Materials, 2016, s. 86-99.
[131]
P.-L. Larsson och E. Olsson, "Contact between elastic-plastic hardmetal powder particles," i Proceedings Euro PM 2015 : International Power Metallurgy Congress and Exhibition, 2015.
[132]
E. Olsson och P.-L. Larsson, "Micromechanics of green body fracture," i Euro PM 2014 Congress and Exhibition, Proceedings, 2014.
[133]
M. Saadati et al., "Granite rock fragmentation at percussive drilling," i Rock Dynamics and Applications - State of the Art: Proceedings of the 1st International Conference on Rock Dynamics and Applications, RocDyn-1 2013, 2013, s. 437-442.
[134]
E. Olsson och P.-L. Larsson, "Study of springback of green bodies using micromechanical experiments and the discrete element method," i Particle-Based Methods III : Fundamentals and Applications - Proceedings of the 3rd International Conference on Particle-based Methods Fundamentals and Applications, Particles 2013, 2013, s. 590-601.
[135]
D. Andersson och P.-L. Larsson, "Determination of yield surfaces in advanced constitutive powder models using inverse modeling," i Proceedings of the Euro PM 2011 Congress and Exhibition, 2011, s. 247-252.
[136]
E. Olsson och P.-L. Larsson, "Effect of particle size distribution at powder compaction," i Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2011, 2011, s. 265-270.
[137]
F. Wredenberg och P.-L. Larsson, "On Scratching of Elastic-Plastic Thin Films on Elastic Substrates," i Friction, wear and wear protection : International Symposium on Friction, Wear and Wear Protection 2008, Aachen, Germany, 2011, s. 321-326.
[138]
D. Andersson et al., "Inverse modeling for parameter determination when using advanced material models to describe powder compaction," i Proceedings of the World Powder Metallurgy Congress and Exhibition, World PM 2010, 2010, s. 77-84.
[139]
D. Andersson et al., "Parameter Sensitivity at Advanced Constitutive Modeling of Powder Materials," i Proceedings of the Euro International Powder Metallurgy Congress and Exhibition, Euro PM 2009, 2009, s. 293-298.
[140]
P. Lindskog et al., "Optimization as a Tool for Characterization of Advanced Constitutive Models describing Powder Compaction," i Proceedings of the Euro PM 2007 Congress and Exhibition, 2007, s. 381-386.
[141]
F. Wredenberg och P. L. Larsson, "Experimental and numerical analysis of the scratch test," i Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VII, 2005, s. 251-260.
[142]
O. Skrinjar och P.-L. Larsson, "On the Local Contact Behaviour during Cold Compaction of Composite Powders," i Proceedings of the 2004 Powder Metallurgy World Congress and Exhibition, 2004, s. 277-283.
[143]
C. Barbier et al., "Folding of Printed Papers: Experiments and Numerical Analysis," i Preprints of the 2003 International Paper Physics Conference, 2003, s. 193-196.
[144]
F. Hild, F. Leckie och P.-L. Larsson, "Criteria based on localization for the design of fiber reinforced brittle matrix composites," i ASME Summer Mechanics and Materials Conferences, 1992, s. 77-90.
Icke refereegranskade
Rapporter
[145]
[146]
[147]
M. Saadati et al., "On the tensile strength of granite at high strain-rates considering the influence from pre-existing cracks," , TRITA-HFL. Rapport/ Institutionen för hållfasthetslära, KTH, 566, 2014.
[148]
E. Olsson och P.-L. Larsson, "A Numerical Analysis of Cold Powder Compaction Based on Micromechanical Experiments," , Trita-HFL. Rapport/ Institutionen för hållfasthetslära, KTH, 533, 2013.
[149]
M. Saadati et al., "On the mechanical behavior of granite material with particular emphasis on the influence from pre-existing cracks and defects," , TRITA-HFL. Rapport/ Institutionen för hållfasthetslära, KTH, 545, 2013.
[150]
C. Barbier, P.-L. Larsson och S. Östlund, "On the effect of high anisotropy at folding of coated papers," , Trita-HFL, 0374, 2004.
Övriga
[151]
A. Lundkvist et al., "Discrete element modelling of the elastic-plastic and viscoelastic properties of a lithium-ion battery electrode layer," (Manuskript).
Senaste synkning med DiVA:
2024-11-17 04:12:14