Publikationer av Pär Jönsson
Refereegranskade
Artiklar
[1]
J. J. Bolívar Caballero et al., "Electrified catalytic steam reforming for renewable syngas production : Experimental demonstration, process development and techno-economic analysis," Applied Energy, vol. 377, 2025.
[2]
Y. Jin et al., "A novel three-stage ex-situ catalytic pyrolysis process for improved bio-oil yield and quality from lignocellulosic biomass," Energy, vol. 295, 2024.
[3]
R. J. Compañero et al., "A value of information approach to recycling," Resources, Conservation and Recycling, vol. 209, 2024.
[4]
Z. Shi et al., "Bio-based anode material production for lithium–ion batteries through catalytic graphitization of biochar : the deployment of hybrid catalysts," Scientific Reports, vol. 14, no. 1, 2024.
[5]
H. Yang et al., "Distributed electrified heating for efficient hydrogen production," Nature Communications, vol. 15, no. 1, 2024.
[6]
S. Akbarnejad, D.-Y. Sheng och P. Jönsson, "A Computational Fluid Dynamics Study on Physical Refining of Steel Melts by Filtration," Metals, vol. 13, no. 6, 2023.
[7]
J. J. Bolívar Caballero et al., "Advanced application of a geometry-enhanced 3D-printed catalytic reformer for syngas production," Energy Conversion and Management, vol. 287, 2023.
[8]
R. J. Compañero et al., "Appraising the value of compositional information and its implications to scrap-based production of steel," Mineral Economics, 2023.
[9]
Y. Jin et al., "Carbon and H-2 recoveries from plastic waste by using a metal-free porous biocarbon catalyst," Journal of Cleaner Production, vol. 404, 2023.
[10]
Z. Shi et al., "Continuous catalytic pyrolysis of biomass using a fluidized bed with commercial-ready catalysts for scale-up," Energy, vol. 273, 2023.
[11]
Y. Wang et al., "Effect of ferrochromium (FeCr) and ferroniobium (FeNb) alloys on inclusion and precipitate characteristics in austenitic stainless steels," Journal of Materials Research and Technology, vol. 25, s. 4989-5002, 2023.
[12]
H. Yang et al., "Evaluation of Engineered Biochar-Based Catalysts for Syngas Production in a Biomass Pyrolysis and Catalytic Reforming Process," Energy & Fuels, vol. 37, no. 8, s. 5942-5952, 2023.
[13]
Y. Jin et al., "From Waste Biomass to Hard Carbon Anodes : Predicting the Relationship between Biomass Processing Parameters and Performance of Hard Carbons in Sodium-Ion Batteries," Processes, vol. 11, no. 3, 2023.
[14]
R. Safavi Nick et al., "Mathematical modelling of novel combined stirring method during the final stage of ladle refining," Ironmaking & steelmaking, s. 1-13, 2023.
[15]
S. Wang et al., "Van Krevelen diagrams based on machine learning visualize feedstock-product relationships in thermal conversion processes," Communications Chemistry, vol. 6, no. 1, 2023.
[16]
S. Wang et al., "A machine learning model to predict the pyrolytic kinetics of different types of feedstocks," Energy Conversion and Management, vol. 260, s. 115613, 2022.
[17]
Y.-C. Lu et al., "Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 1: Characterization of Carbonaceous Materials," Sustainability, vol. 14, no. 15, s. 9488-9488, 2022.
[18]
S. Akbarnejad et al., "Effect of Batch Dissimilarity on Permeability of Stacked Ceramic Foam Filters and Incompressible Fluid Flow : Experimental and Numerical Investigation," Metals, vol. 12, no. 6, s. 1001, 2022.
[19]
S. Wang et al., "Effect of hydrothermal carbonization pretreatment on the pyrolysis behavior of the digestate of agricultural waste : A view on kinetics and thermodynamics," Chemical Engineering Journal, vol. 431, s. 133881, 2022.
[20]
Y. Wang et al., "Estimation of the probable maximum size of inclusions using statistics of extreme values and particle size distribution methods," Journal of Materials Research and Technology, vol. 20, s. 2454-2465, 2022.
[21]
Y. Wen et al., "H2-rich syngas production from pyrolysis of agricultural waste digestate coupled with the hydrothermal carbonization process," Energy Conversion and Management, vol. 269, s. 116101-116101, 2022.
[22]
H. Yang et al., "High-purity syngas production by cascaded catalytic reforming of biomass pyrolysis vapors," Applied Energy, vol. 322, s. 119501, 2022.
[23]
H. Yang et al., "In situ catalytic fast pyrolysis of lignin over biochar and activated carbon derived from the identical process," Fuel processing technology, vol. 227, 2022.
[24]
H. Yang et al., "Influence of the porosity and acidic properties of aluminosilicate catalysts on coke formation during the catalytic pyrolysis of lignin," Journal of Analytical and Applied Pyrolysis, vol. 165, 2022.
[25]
E. Sidorova et al., "Investigation of the Initial Corrosion Destruction of a Metal Matrix around Different Non-Metallic Inclusions on Surfaces of Pipeline Steels," Materials, vol. 15, no. 7, 2022.
[26]
S. Wang et al., "Novel carbon-negative methane production via integrating anaerobic digestion and pyrolysis of organic fraction of municipal solid waste," Energy Conversion and Management, vol. 252, s. 115042, 2022.
[27]
Q. Xie et al., "Numerical Simulations on Dynamic Behavior of Multiphase Flow and Heat Transfer in a Round Mold with a Swirling Flow Tundish Design," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 53, no. 5, s. 3197-3214, 2022.
[28]
W. Wei et al., "Prediction of nitrogen behaviour in the AOD process by a time-dependent thermodynamic model," Ironmaking & steelmaking, vol. 49, no. 1, s. 70-82, 2022.
[29]
K. Jagodzińska, P. G. Jönsson och W. Yang, "Pyrolysis and in-line catalytic decomposition of excavated landfill waste to produce carbon nanotubes and hydrogen over Fe- and Ni-based catalysts - Investigation of the catalyst type and process temperature," Chemical Engineering Journal, vol. 446, 2022.
[30]
Y. Wen et al., "Pyrolysis of engineered beach-cast seaweed : Performances and life cycle assessment," Water Research, vol. 222, 2022.
[31]
S. Wang et al., "Renewable hydrogen production from the organic fraction of municipal solid waste through a novel carbon-negative process concept," Energy, vol. 252, 2022.
[32]
M. De Colle et al., "A Study of Treatment of Industrial Acidic Wastewaters with Stainless Steel Slags Using Pilot Trials," Materials, vol. 14, no. 17, s. 4806, 2021.
[33]
A. Safavi Nick, M. Vynnycky och P. G. Jönsson, "Analysis of a model for longitudinal electromagnetic stirring in the continuous casting of steel," International journal of applied electromagnetics and mechanics, vol. 66, no. 1, s. 35-61, 2021.
[34]
A. Karasev et al., "Application of Some Modern Analytical Techniques for Characterization of Non-Metallic Inclusions in a Fe-10mass%Ni Alloy Deoxidized by Ti/Zr and Ti/Mg," Metals, vol. 11, no. 3, 2021.
[35]
K. Jagodzińska et al., "Can torrefaction be a suitable method of enhancing shredder fines recycling?," Waste Management, vol. 128, s. 211-220, 2021.
[36]
K. Jagodzińska et al., "Characterisation of excavated landfill waste fractions to evaluate the energy recovery potential using Py-GC/MS and ICP techniques," Resources, Conservation and Recycling, vol. 168, 2021.
[37]
Y. Wang, A. Karasev och P. Jönsson, "Characterization of Nonmetallic Inclusions in Different Ferroalloys used in the Steelmaking Processes," Steel Research International, vol. 92, no. 11, 2021.
[38]
H. Du et al., "Characterization of Nonmetallic Inclusions in Low-Alloyed Steels Using Pulse Distribution Analysis Optical Emission Spectroscopy and Offline Investigation Methods," Steel Research International, vol. 92, no. 11, s. 2100223, 2021.
[39]
R. Gyllenram et al., "Driving investments in ore beneficiation and scrap upgrading to meet an increased demand from the direct reduction-EAF route," Mineral Economics, 2021.
[40]
J. Svantesson, M. Ersson och P. Jönsson, "Effect of Froude Number on Submerged Gas Blowing Characteristics," Materials, vol. 14, no. 3, 2021.
[41]
Y. Wang et al., "Effect of LCFeCr Alloy Additions on the Non-metallic Inclusion Characteristics in Ti-Containing Ferritic Stainless Steel," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 52, no. 6, s. 3815-3832, 2021.
[42]
D. Sheng och P. G. Jönsson, "Effect of Thermal Buoyancy on Fluid Flow and Residence-Time Distribution in a Single-Strand Tundish," Materials, vol. 14, no. 8, 2021.
[43]
M. Al-Saadi et al., "Effect of Trace Magnesium Additions on the Dynamic Recrystallization in Cast Alloy 825 after One-Hit Hot-Deformation," Metals, vol. 11, no. 1, 2021.
[44]
S. Guo et al., "Evaluation of Sulfide Inclusions before and after Deformation of Steel by Using the Electrolytic Extraction Method," Metals, vol. 11, no. 4, 2021.
[45]
Y. Wang et al., "Evolution of the Non-metallic Inclusions Influenced by Slag-Metal Reactions in Ti-Containing Ferritic Stainless Steel," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 52, no. 6, s. 3986-4001, 2021.
[46]
J. Yin et al., "Experimental and Numerical Study of the Free Surface During the Side Teeming Ingot Casting Process," Steel Research International, vol. 92, no. 8, s. 2000660, 2021.
[47]
M. Al-Saadi et al., "Hot Deformation Behaviour and Processing Map of Cast Alloy 825," Journal of materials engineering and performance (Print), 2021.
[48]
E. Sjöqvist Persson et al., "Impact of solidification on inclusion morphology in ESR and PESR remelted martensitic stainless steel ingots," Metals, vol. 11, no. 3, s. 408-424, 2021.
[49]
H. Du, A. Karasev och P. G. Jönsson, "Influence of Non-metallic Inclusions in 316L Stainless Steels on Machining Using Different Cutting Speeds," ISIJ International, vol. 61, no. 9, s. 2426-2434, 2021.
[50]
Y. Wang et al., "Interfacial Phenomena and Inclusion Formation Behavior at Early Melting Stages of HCFeCr and LCFeCr Alloys in Liquid Iron," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 52, no. 4, s. 2459-2473, 2021.
[51]
Y. Wang et al., "Interfacial Reactions and Inclusion Formations at an Early Stage of FeNb Alloy Additions to Molten Iron," ISIJ International, vol. 61, no. 1, s. 209-218, 2021.
[52]
Y. Wen et al., "Magnetic bio-activated carbons production using different process parameters for phosphorus removal from artificially prepared phosphorus-rich and domestic wastewater," Chemosphere, vol. 271, 2021.
[53]
N. Arzpeyma et al., "Model Development to Study Uncertainties in Electric Arc Furnace Plants to Improve Their Economic and Environmental Performance," Metals, vol. 11, no. 6, 2021.
[54]
M. Al-Saadi et al., "Modelling of strengthening mechanisms in wrought nickel-based 825 alloy subjected to solution annealing," Metals, vol. 11, no. 5, s. 771-20, 2021.
[55]
T. Jarnerud, A. Karasev och P. Jönsson, "Neutralization of Acidic Wastewater from a Steel Plant by Using CaO‐Containing Waste Materials from Pulp and Paper Industries," Materials, vol. 14, 2021.
[56]
Y. Wang et al., "Non-metallic Inclusions in Different Ferroalloys and Their Effect on the Steel Quality : A Review," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 52, no. 5, s. 2892-2925, 2021.
[57]
I. N. Zaini et al., "Primary fragmentation behavior of refuse derived fuel pellets during rapid pyrolysis," Fuel processing technology, vol. 216, 2021.
[58]
S. Wang et al., "Pyrolysis behaviour, kinetics and thermodynamic data of hydrothermal carbonization-Treated pulp and paper mill sludge," Renewable energy, vol. 177, s. 1282-1292, 2021.
[59]
K. Jagodzińska et al., "Pyrolysis of excavated waste from landfill mining: Characterisation of the process products," Journal of Cleaner Production, vol. 279, 2021.
[60]
Y. Wen et al., "Pyrolysis of raw and anaerobically digested organic fractions of municipal solid waste : Kinetics, thermodynamics, and product characterization," Chemical Engineering Journal, vol. 415, 2021.
[61]
J. Svantesson et al., "Study of Dynamic Refractory Wear by Slags Containing Very High FeO Contents under Steelmaking Conditions," Ironmaking & steelmaking, vol. 48, no. 5, s. 607-618, 2021.
[62]
M. De Colle et al., "Study of the Dissolution of Stainless-Steel Slag Minerals in Different Acid Environments to Promote Their Use for the Treatment of Acidic Wastewaters," Applied Sciences, vol. 11, no. 24, 2021.
[63]
M. De Colle et al., "Study of the Hydration Behavior of Synthetic Ferropericlase with LowIron Oxide Concentrations to Prevent Swelling in Steel Slags," Journal of Sustainable Metallurgy, 2021.
[64]
Y. Wen et al., "Synergistic effect of the co-pyrolysis of cardboard and polyethylene : A kinetic and thermodynamic study," Energy, vol. 229, 2021.
[65]
S. Wang et al., "Synergistic effects in the copyrolysis of municipal sewage sludge digestate and salix : Reaction mechanism, product characterization and char stability," Applied Energy, vol. 289, 2021.
[66]
H. Du, A. Karasev och P. G. Jönsson, "Three-dimensional Investigations of Non-metallic Inclusions in Stainless Steels before and after Machining," ISIJ International, vol. 61, no. 9, s. 2416-2425, 2021.
[67]
T. Jarnerud et al., "Utilization of Organic Mixed Biosludge from Pulp and Paper Industries and Green Waste as Carbon Sources in Blast Furnace Hot Metal Production," Sustainability, vol. 13, no. 14, 2021.
[68]
J. Yin et al., "An Experimental and Numerical Study of the Free Surface in an Uphill Teeming Ingot Casting Process," Steel Research International, vol. 91, no. 6, 2020.
[69]
T. Jarnerud et al., "Application of Fly Ash from Pulp and Paper Industries as Slag Formers in Electric Arc Furnace Stainless Steel Production," Steel Research International, vol. 91, no. 10, 2020.
[70]
H. Du et al., "Assessment of Chip Breakability during Turning of Stainless Steels Based on Weight Distributions of Chips," Metals, vol. 10, no. 5, 2020.
[71]
M. Law et al., "Assessment of Mechanisms for Particle Migration in Semi-Solid High Pressure Die Cast Aluminium-Silicon Alloys," Journal of manufacturing and materials processing, vol. 4, no. 51, 2020.
[72]
E. Khodabandeh et al., "CFD study of non-premixed swirling burners : Effect of turbulence models," Chinese Journal of Chemical Engineering, vol. 28, no. 4, s. 1029-1038, 2020.
[73]
D. K. Ratnasari, W. Yang och P. Jönsson, "Catalytic Pyrolysis of Lignocellulosic Biomass : The Influence of the Catalyst Regeneration Sequence on the Composition of Upgraded Pyrolysis Oils over a H-ZSM-5/Al-MCM-41 Catalyst Mixture," ACS Omega, vol. 5, no. 45, s. 28992-29001, 2020.
[74]
D. Gorkusha et al., "Characterization of Non-metallic Inclusions and Clusters during Production of Low-carbon IF Steel," ISIJ International, vol. 60, no. 12, s. 2819-2828, 2020.
[75]
Y. Wang, A. Karasev och P. Jönsson, "Comparison of Nonmetallic Inclusion Characteristics in Metal Samples Using 2D and 3D Methods," Steel Research International, vol. 91, no. 7, s. 1900669, 2020.
[76]
N. Arzpeyma, R. Gyllenram och P. G. Jönsson, "Development of a Mass and Energy Balance Model and Its Application for HBI Charged EAFs," Metals, vol. 10, no. 3, 2020.
[77]
D. K. Ratnasari et al., "Effect of H-ZSM-5 and Al-MCM-41 Proportions in Catalyst Mixtures on the Composition of Bio-Oil in Ex-Situ Catalytic Pyrolysis of Lignocellulose Biomass," Catalysts, vol. 10, 2020.
[78]
E. Alekseeva et al., "Effect of Inclusions on the Corrosion Properties of the Nickel-Based Alloys 718 and EP718," Metals, vol. 10, no. 9, 2020.
[79]
W. Wei et al., "Energy Consumption and Greenhouse Gas Emissions During Ferromolybdenum Production," Journal of Sustainable Metallurgy, vol. 6, no. 1, s. 103-112, 2020.
[80]
W. Wei et al., "Energy Consumption and Greenhouse Gas Emissions of Nickel Products," Energies, vol. 13, no. 21, 2020.
[81]
L. S. Carlsson et al., "Fibers of Failure : Classifying Errors in Predictive Processes," Algorithms, vol. 13, no. 6, 2020.
[82]
N. Choi et al., "Influence of Manufacturing Conditions on Inclusion Characteristics and Mechanical Properties of FeCrNiMnCo Alloy," Metals, vol. 10, no. 10, 2020.
[83]
L. Carlsson, P. Samuelsson och P. Jönsson, "Interpretable Machine Learning—Tools to Interpret the Predictions of a Machine Learning Model Predicting the Electrical Energy Consumption of an Electric Arc Furnace," Steel Research International, 2020.
[84]
T. Han et al., "Magnetic bio-activated carbon production from lignin via a streamlined process and its use in phosphate removal from aqueous solutions," Science of the Total Environment, vol. 708, 2020.
[85]
P. Ternstedt et al., "Methods to Determine Characteristics of AOD-Converter Decarburization-Slags," Metals, vol. 10, no. 3, 2020.
[86]
L. S. Carlsson, P. B. Samuelsson och P. G. Jönsson, "Modeling the Effect of Scrap on the Electrical Energy Consumption of an Electric Arc Furnace," Processes, vol. 8, no. 9, 2020.
[87]
J. Svantesson et al., "Numerical Analysis of Slag Transfer in the IronArcProcess," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 51, s. 2171-2186, 2020.
[88]
X. Xu, M. Ersson och P. Jönsson, "Numerical Investigations on Bubble Behavior at a Steel–Slag Interface," Steel Research International, 2020.
[89]
E. Sjöqvist Persson et al., "Origin of the Inclusions in Production-Scale Electrodes, ESR Ingots, and PESR Ingots in a Martensitic Stainless Steel," Metals, vol. 10, no. 12, 2020.
[90]
I. N. Zaini et al., "Production of H-2-rich syngas from excavated landfill waste through steam co-gasification with biochar," Energy, vol. 207, 2020.
[91]
T. Han, W. Yang och P. Jönsson, "Pyrolysis and subsequent steam gasification of metal dry impregnated lignin for the production of H2-rich syngas and magnetic activated carbon," Chemical Engineering Journal, vol. 394, 2020.
[92]
Y. Wen et al., "Pyrolysis performance of peat moss : A simultaneous in-situ thermal analysis and bench-scale experimental study," Fuel, vol. 277, 2020.
[93]
S. Wang et al., "Pyrolysis study of hydrothermal carbonization-treated digested sewage sludge using a Py-GC/MS and a bench-scale pyrolyzer," Fuel, vol. 262, s. 116335, 2020.
[94]
Y. Liu et al., "Reply to the Discussion on “A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy”," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 51, no. 4, s. 1847-1850, 2020.
[95]
E. Khodabandeh et al., "The effects of oil/MWCNT nanofluids and geometries on the solid oxide fuel cell cooling systems : a CFD study," Journal of thermal analysis and calorimetry (Print), 2020.
[96]
L. Carlsson, P. Samuelsson och P. G. Jönsson, "Using statistical modeling to predict the electrical energy consumption of an electric arc furnace producing stainless steel," Metals, vol. 10, no. 1, 2020.
[97]
X. Hu et al., "Utilization of fly ash and waste lime from pulp and paper mills in the Argon Oxygen Decarburization process," Journal of Cleaner Production, vol. 261, 2020.
[98]
C. Xuan et al., "Wetting and spreading behavior of liquid iron on single crystal TiO2 substrate," Materials letters (General ed.), vol. 258, 2020.
[99]
P. Ni et al., "A Kinetic Model of Mass Transfer and Chemical Reactions at a Steel/Slag Interface under Effect of Interfacial Tensions," ISIJ International, vol. 59, no. 5, s. 737-748, 2019.
[100]
Y. Liu et al., "A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 50, no. 1, s. 555-577, 2019.
[101]
Y. Wang, A. Karasev och P. G. Jönsson, "An Investigation of Non-Metallic Inclusions in Different Ferroalloys using Electrolytic Extraction," Metals, vol. 9, no. 6, 2019.
[102]
P. Pirouznia et al., "An investigation of the Temperature Distribution of a Thin Steel Strip during the Quenching Step of a Hardening Process," Metals, vol. 9, no. 6, 2019.
[103]
K. Nakajima, W. Mu och P. Jönsson, "Assessment of a Simplified Correlation Between Wettability Measurement and Dispersion/Coagulation Potency of Oxide Particles in Ferrous Alloy Melt," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 50, no. 5, s. 2229-2237, 2019.
[104]
T. Jarnerud, A. Karasev och P. G. Jönsson, "Briquetting of wastes from pulp and paper industries by using AOD converter slag as binders for application in metallurgy," Materials, vol. 12, no. 18, 2019.
[105]
T. Han et al., "Catalytic pyrolysis of lignin using low-cost materials with different acidities and textural properties as catalysts," Chemical Engineering Journal, vol. 373, s. 846-856, 2019.
[106]
M. Nabeel et al., "Characterization of Inclusions in 3rd Generation Advanced High-Strength Steels," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 50, no. 4, s. 1674-1685, 2019.
[107]
M. Nabeel et al., "Characterization of inclusions in high-Mn steel using two-dimensional and three-dimensional methods," Iron & Steel Technology, vol. 16, no. 7, s. 74-82, 2019.
[108]
I. N. Zaini et al., "Characterization of pyrolysis products of high-ash excavated-waste and its char gasification reactivity and kinetics under a steam atmosphere," Waste Management, vol. 97, s. 149-163, 2019.
[109]
Y. Liu et al., "Comparison of Euler-Euler Approach and Euler–Lagrange Approach to Model Gas Injection in a Ladle," Steel Research International, vol. 90, no. 5, 2019.
[110]
A. Davydenko et al., "Direct Reduction of Fe, Ni and Cr from Oxides of Waste Products Used in Briquettes for Slag Foaming in EAF," Materials, vol. 12, no. 20, 2019.
[111]
H. Bai et al., "Effect of swirling flow tundish submerged entry nozzle outlet design on multiphase flow and heat transfer in mould," Ironmaking & steelmaking, 2019.
[112]
K. Bölke et al., "Experimental Determinations of Mixing Times in the IronArc Pilot Plant Process," Metals, vol. 9, no. 1, 2019.
[113]
D. K. Ratnasari, W. Yang och P. Jönsson, "Kinetic Study of an H‑ZSM-5/Al−MCM-41 Catalyst Mixture and ItsApplication in Lignocellulose Biomass Pyrolysis," Energy & Fuels, s. 5360-5367, 2019.
[114]
D. K. Ratnasari, W. Yang och P. Jönsson, "Kinetic study of an H-ZSM-5/Al-MCM-41 catalyst mixture and its application in lignocellulose biomass pyrolysis," Energy & Fuels, vol. 33, no. 6, s. 5360-5367, 2019.
[115]
N. Arzpeyma, M. Ersson och P. Jönsson, "Mathematical Modeling of Postcombustion in an Electric Arc Furnace (EAF)," Metals, vol. 9, no. 5, 2019.
[116]
P. Ni et al., "Mathematical Modelling Study of Dynamic Composition Change of Steel and Mold Flux in Continuous Casting of Steel," ISIJ International, vol. 59, no. 11, s. 2024-2035, 2019.
[117]
J. Yin et al., "Mathematical Modelling of the Initial Mold Filling with Utilization of an Angled Runner," Metals, vol. 9, no. 6, 2019.
[118]
E. Sidorova et al., "Modification of Non-Metallic Inclusions in Oil-Pipeline Steels by Ca-Treatment," Metals, vol. 9, no. 4, 2019.
[119]
H. Du et al., "Modification of Non-Metallic Inclusions in Stainless Steel by Addition of CaSi," Metals, vol. 9, no. 1, 2019.
[120]
E. Khodabandeh et al., "Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure : sinusoidal cavities and rectangular ribs," Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, no. 10, 2019.
[121]
H. Bai, M. Ersson och P. Jönsson, "Numerical study of an application of a divergent reverse TurboSwirl nozzle in the billet continuous casting process," Ironmaking & steelmaking, vol. 46, no. 2, s. 148-158, 2019.
[122]
Y. Liu et al., "Physical and Numerical Modelling on the Mixing Condition in a 50 t Ladle," Metals, vol. 9, no. 11, 2019.
[123]
L. Carlsson, P. Samuelsson och P. Jönsson, "Predicting the Electrical Energy Consumption of Electric Arc Furnaces Using Statistical Modeling," Metals, vol. 9, no. 9, 2019.
[124]
P. Pirouznia et al., "The Impact of the Gas Inlet Position, Flow Rate, and Strip Velocity on the Temperature Distribution of a Stainless-Steel Strips during the Hardening Process," Metals, vol. 9, no. 9, 2019.
[125]
M. De Colle et al., "The Use of High-Alloyed EAF Slag for the Neutralization of On-Site Produced Acidic Wastewater: The First Step Towards a Zero-Waste Stainless-Steel Production Process," Applied Sciences, vol. 9, no. 19, 2019.
[126]
D. K. Ratnasari et al., "The thermal degradation of lignocellulose biomass with an acid leaching pre-treatment using a H-ZSM-5/Al-MCM-41 catalyst mixture," Fuel, vol. 257, s. 116086, 2019.
[127]
L. Carlsson, P. Samuelsson och P. Jönsson, "Using interpretable machine learning to predict the electrical energy consumption of an electric arc furnace," Stahl und Eisen (1881), vol. 139, no. 9, s. 24-29, 2019.
[128]
N. Lundkvist et al., "A Physical Modeling Study on Slag Behavior in the AOD Converter Process," Steel Research International, vol. 89, no. 6, 2018.
[129]
P. Ni et al., "A kinetic model on oxygen transfer at a steel/slag interface under effect of interfacial tension," ISIJ International, vol. 58, no. 11, s. 1979-1988, 2018.
[130]
P. Ternstedt et al., "A physical modelling study to determine the influence of slag on the fluid flow in the AOD converter process," Ironmaking & steelmaking, vol. 45, no. 10, s. 944-950, 2018.
[131]
P. Ni et al., "A study on the nonmetallic inclusion motions in a swirling flow submerged entry nozzle in a new cylindrical tundish design," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 49, no. 2, s. 723-736, 2018.
[132]
P. Svidró et al., "Correction to : Determination of pressure in the extradendritic liquid area during solidification (Journal of Thermal Analysis and Calorimetry, (2018), 132, 3, (1661-1667), 10.1007/s10973-018-7088-z)," Journal of thermal analysis and calorimetry (Print), vol. 134, no. 3, 2018.
[133]
P. Svidró, A. Diószegi och P. Jönsson, "Determination of pressure in the extradendritic liquid area during solidification," Journal of thermal analysis and calorimetry (Print), vol. 132, no. 3, s. 1661-1667, 2018.
[134]
S. Wang et al., "Effect of H2 as Pyrolytic Agent on the Product Distribution during Catalytic Fast Pyrolysis of Biomass Using Zeolites," Energy & Fuels, vol. 32, no. 8, s. 8530-8536, 2018.
[135]
P. Ni et al., "Effect of immersion depth of a swirling flow tundish SEN on multiphase flow and heat transfer in Mold," Metals, vol. 8, no. 11, 2018.
[136]
T. Han et al., "Evolution of sulfur during fast pyrolysis of sulfonated Kraft lignin," Journal of Analytical and Applied Pyrolysis, vol. 33, s. 162-168, 2018.
[137]
W. Mu et al., "High-Temperature Confocal Laser Scanning Microscopy Studies of Ferrite Formation in Inclusion-Engineered Steels : A Review," JOM : The Member Journal of TMS, vol. 70, no. 10, s. 2283-2295, 2018.
[138]
J. Svensson et al., "Implementation of an YSZ coating material to prevent clogging of the submerged entry nozzle (SEN) during continuous casting of Ce-treated steels," Ironmaking & steelmaking, vol. 45, no. 2, s. 105-113, 2018.
[139]
K. Bölke et al., "Importance of the Penetration Depth and Mixing in the IRONARC Process," ISIJ International, vol. 58, no. 7, s. 1210-1217, 2018.
[140]
M. Ghadamgahi et al., "Numerical and experimental study on flameless oxy-fuel combustion in a pilot-scale and a real-size industrial furnace," Applied Thermal Engineering, vol. 141, s. 788-797, 2018.
[141]
P. Ni et al., "Numerical study on the influence of a swirling flow tundish on multiphase flow and heat transfer in mold," Metals, vol. 8, no. 5, 2018.
[142]
K. Bölke et al., "Physical Modeling Study on the Mixing in the New IronArc Process," Steel Research International, vol. 89, no. 7, 2018.
[143]
H. Zhang et al., "Prediction of Influences of Co, Ni, and W Elements on Carbide Precipitation Behavior in Fe–C–V–Cr–Mo Based High Speed Steels," Steel Research International, vol. 89, no. 10, 2018.
[144]
T. Yoshioka et al., "The Effect of a High Al Content on the Variation of the Total Oxygen Content in the Steel Melt during a Secondary Refining Process," Steel Research International, vol. 89, no. 2, 2018.
[145]
K. Steneholm et al., "The role of process control on the steel cleanliness," Ironmaking & steelmaking, vol. 45, no. 2, s. 114-124, 2018.
[146]
D. K. Ratnasari, W. Yang och P. Jönsson, "Two-stage ex-situ catalytic pyrolysis of lignocellulose for the production of gasoline-range chemicals," Journal of Analytical and Applied Pyrolysis, vol. 134, s. 454-464, 2018.
[147]
P. Samuelsson et al., "Use of physical modelling to study how to increase the production capacity by implementing a novel oblong AOD converter," Ironmaking & steelmaking, vol. 45, no. 4, s. 335-341, 2018.
[148]
P. Ni et al., "Application of a swirling flow producer in a conventional tundish during continuous casting of steel," ISIJ International, vol. 57, no. 12, s. 2175-2184, 2017.
[149]
M. Nabeel et al., "Characterization of Dust Generated during Mechanical Wear of Partially Reduced Iron Ore Pellets," Steel Research International, vol. 88, no. 9, 2017.
[150]
S. Akbarnejad et al., "Effect of Fluid Bypassing on the Experimentally Obtained Darcy and Non-Darcy Permeability Parameters of Ceramic Foam Filters," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 48, no. 1, s. 197-207, 2017.
[151]
H. Kellner et al., "Effect of the Stirring Mode on the Behavior of Al2O3–MgO Particles and Clusters during Ladle Treatment of Ni-based Alloy 825," Steel Research International, vol. 87, 2017.
[152]
H. E. O. Kellner et al., "Estimation of Non-Metallic Inclusions in Industrial Ni Based Alloys 825," Steel Research International, vol. 88, no. 4, 2017.
[153]
M. Nabeel, A. Karasev och P. Jönsson, "Friction Forces and Mechanical Dust Generation in an Iron Ore Pellet Bed Subjected to Varied Applied Loads," ISIJ International, vol. 57, no. 4, s. 656-664, 2017.
[154]
P. Svidró et al., "Investigation of Dendrite Coarsening in Complex Shaped Lamellar Graphite Iron Castings," Metals, vol. 7, s. 244, 2017.
[155]
T. Yoshioka et al., "Mechanism of a CaS Formation in an Al-Killed High-S Containing Steel during a Secondary Refining Process without a Ca-Treatment," Steel Research International, vol. 88, no. 10, 2017.
[156]
M. Ghadamgahi et al., "Numerical Study on the Effect of Lambda Value (Oxygen/Fuel Ratio) on Temperature Distribution and Efficiency of a Flameless Oxyfuel Combustion System," Energies, vol. 10, no. 3, 2017.
[157]
P. Ni et al., "Numerical and Physical Study on a Cylindrical Tundish Design to Produce a Swirling Flow in the SEN During Continuous Casting of Steel," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 48, no. 5, s. 2695-2706, 2017.
[158]
W. Mu, P. Jönsson och K. Nakajima, "Recent Aspects on the Effect of Inclusion Characteristics on the Intragranular Ferrite Formation in Low Alloy Steels : A Review," High Temperature Materials and Processes, vol. 36, no. 4, s. 309-325, 2017.
[159]
J. Svensson et al., "Studies of new coating materials to prevent clogging of the submerged entry nozzle (SEN) during continuous casting of Al-killed low carbon steels," Ironmaking & steelmaking, vol. 44, no. 2, s. 117-127, 2017.
[160]
J. Svensson et al., "Studies of the decarburisation phenomena duringpreheating of submerged entry nozzles (SEN) incontinuous casting processes," Ironmaking & steelmaking, vol. 44, no. 2, s. 108-116, 2017.
[161]
A. Gauffin et al., "Time-varying losses in material flows of steel using dynamic material flow models," Resources, Conservation and Recycling, vol. 116, s. 70-83, 2017.
[162]
P. Ni et al., "Transport and Deposition of Non-Metallic Inclusions in Steel Flows- A Comparison of Different Model Predictions to Pilot Plant Experiment Data," Steel Research International, vol. 88, no. 12, 2017.
[163]
M. Ghadamgahi et al., "A Comparative CFD Study on Simulating Flameless Oxy-Fuel Combustion in a Pilot-Scale Furnace," Journal of Combustion, 2016.
[164]
C. Chen et al., "A Model Study of Inclusions Deposition, Macroscopic Transport, and Dynamic Removal at Steel–Slag Interface for Different Tundish Designs," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 47, no. 3, s. 1916-1932, 2016.
[165]
P. Nilsson et al., "A New Tundish Design to Produce a Swirling Flow in the SEN During Continuous Casting of Steel," Steel Research International, 2016.
[166]
Y. Xu, M. Ersson och P. G. Jönsson, "A Numerical Study about the Influence of a Bubble Wake Flow on the Removal of Inclusions," ISIJ INTERNATIONAL, vol. 56, no. 11, s. 1982-1988, 2016.
[167]
J. Ekengård, P. Jönsson och A. Dioszegi, "A STUDY OF OXYGEN ACTIVITIES BEFORE THE START OF SOLIDIFICATION OF CAST IRONS," International Journal of metalcasting, vol. 10, no. 4, 2016.
[168]
H. Liu et al., "A Simulation Study of Particles Generated from Pellet Wear Contacts during a Laboratory Test," ISIJ INTERNATIONAL, vol. 56, no. 11, s. 1910-1919, 2016.
[169]
H. Liu et al., "A pin-on-disc study of airborne wear particles from dry sliding wheel-rail contacts," Civil-Comp Proceedings, vol. 110, 2016.
[170]
H. Liu, L. T. I. Jonsson och P. Jönsson, "A simulation study of airborne wear particles from laboratory wheel-rail contacts," Particuology, 2016.
[171]
H. Bai, M. Ersson och P. G. Jönsson, "An Experimental and Numerical Study of Swirling Flow Generated by TurboSwirl in an Uphill Teeming Ingot Casting Process," ISIJ International, vol. 56, no. 8, s. 1404-1412, 2016.
[172]
S. Akbarnejad et al., "Analysis on Experimental Investigation and Mathematical Modeling of Incompressible Flow Through Ceramic Foam Filters," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 47, no. 4, s. 2229-2243, 2016.
[173]
D. Janis et al., "Application of pulse distribution analysis with optical emission spectroscopy (PDA/OES) method during production of duplex stainless steel," Ironmaking & steelmaking, vol. 43, no. 2, s. 121-129, 2016.
[174]
C. Xuan et al., "Attraction Force Estimations of Al2O3 Particle Agglomerations in the Melt," Steel Research International, 2016.
[175]
P. Ni et al., "Deposition of particles in liquid flows in horizontal straight channels," International Journal of Heat and Fluid Flow, vol. 62, s. 166-173, 2016.
[176]
P. Nazem Jalali et al., "Diagnosis and optimisation of continuous casting practices through numerical modelling," La Metallurgia Italiana, no. 2, s. 43-49, 2016.
[177]
W. Mu et al., "Effect of Carbon Content on the Potency of the Intragranular Ferrite Formation," Steel Research International, vol. 87, no. 3, s. 311-319, 2016.
[178]
H. Liu et al., "Effect of the Sliding Velocity on the Size and Amount of Airborne Wear Particles Generated from Dry Sliding Wheel-Rail Contacts," Tribology letters, vol. 63, no. 3, 2016.
[179]
J. Bu, P. G. Jönsson och Z. Zhao, "Electrical conductivities of translucent BaZr(X)Ce0.8-XY0.2O3-delta (x=0.5, 0.6, 0.7) ceramics," Scripta Materialia, vol. 115, s. 87-90, 2016.
[180]
C. Xuan, A. V. Karasev och P. G. Jönsson, "Evaluation of Agglomeration Mechanisms of Non-metallic Inclusions and Cluster Characteristics Produced by Ti/Al Complex Deoxidation in Fe-10mass% Ni Alloy," ISIJ International, vol. 56, no. 7, s. 1204-1209, 2016.
[181]
M. Nabeel, A. Karasev och P. Jönsson, "Evaluation of Dust Generation during Mechanical Wear of Iron Ore Pellets," ISIJ International, vol. 56, no. 6, s. 960-966, 2016.
[182]
H. E. O. Kellner et al., "Evolution of Non-Metallic Inclusions from FeTi70R Alloys during Alloying of Fe-40Ni-20Cr Steels," Steel Research International, 2016.
[183]
W. Mu et al., "Ferrite Formation Dynamics and Microstructure Due to Inclusion Engineering in Low-Alloy Steels by Ti2O3 and TiN Addition," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 47, no. 4, s. 2133-2147, 2016.
[184]
W. Mu et al., "Inclusion and Microstructure Characteristics in Steels with TiN Additions," Steel Research International, vol. 87, no. 3, s. 339-348, 2016.
[185]
P. Ni et al., "Non-Metallic Inclusion Behaviors in a New Tundish and SEN Design Using a Swirling Flow during Continuous Casting of Steel," Steel Research International, 2016.
[186]
X. Zhou et al., "Numerical Simulations of the Kinetic Energy Transferin the Bath of a BOF Converter," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 47, no. 1, s. 434-445, 2016.
[187]
W. Mu, P. Jönsson och K. Nakajima, "Prediction of intragranular ferrite nucleation from TiO, TiN, and VN inclusions," Journal of Materials Science, vol. 51, no. 4, s. 2168-2180, 2016.
[188]
C. Xuan et al., "Retracted: Wetting Behavior of Single Crystal TiO2 by Liquid Iron (Retraction of vol 56, pg 765, 2016)," ISIJ International, vol. 56, no. 6, s. 1117-1117, 2016.
[189]
A. Gauffin et al., "The Global Societal Steel Scrap Reserves and Amounts of Losses," Resources, vol. 5, no. 3, 2016.
[190]
J. Bu, P. G. Jönsson och Z. Zhao, "The effect of NiO on the conductivity of BaZr0.5Ce0.3Y0.2O3-delta based electrolytes," RSC Advances, vol. 6, no. 67, s. 62368-62377, 2016.
[191]
J. Bu, P. Jönsson och Z. Zhao, "Transport properties of BaZr0.5Ce0.3Y0.2O3-δ proton conductor prepared by spark plasma sintering," Ceramics International, vol. 42, no. 3, s. 4393-4399, 2016.
[192]
C. Xuan, Z. Zhao och P. G. Jönsson, "Wettability and corrosion of spark plasma sintered (SPS) ZrN by liquid iron and steel," Journal of the European Ceramic Society, vol. 36, no. 10, s. 2435-2442, 2016.
[193]
Y. Xu, M. Ersson och P. Jönsson, "A Mathematical Modeling Study of Bubble Formations in a Molten Steel Bath," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 46, no. 6, s. 2628-2638, 2015.
[194]
C. Chen et al., "A Mathematical Modeling Study of Tracer Mixing in a Continuous Casting Tundish," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 46, no. 1, s. 169-190, 2015.
[195]
D. Janis, A. Karasev och P. G. Jönsson, "A Study of Cluster Characteristics in Liquid Stainless Steel and in a Clogged Nozzle," Steel Research International, vol. 86, no. 11, s. 1271-1278, 2015.
[196]
A. F. Yang, A. Karasev och P. G. Jönsson, "Characterization of Metal Droplets in Slag after Desulfurization of Hot Metal," ISIJ International, vol. 55, no. 3, s. 570-577, 2015.
[197]
W. Mu et al., "Combination of in situ microscopy and calorimetry to study austenite decomposition in inclusion engineered steels," Steel Research International, 2015.
[198]
J. Bu, P. G. Jönsson och Z. Zhao, "Dense and translucent BaZrxCe0.8-xY0.2O3-delta (x=0.5, 0.6, 0.7) proton conductors prepared by spark plasma sintering," Scripta Materialia, vol. 107, s. 145-148, 2015.
[199]
Y. Yang et al., "Design of magnetic fields for half and full type electromagnetic swirl flow generators," Steel Research International, vol. 86, no. 4, s. 361-374, 2015.
[200]
A. F. Yang, A. Karasev och P. G. Jönsson, "Effect of Nepheline Syenite on Iron Losses in Slags during Desulphurization of Hot Metal," Steel Research International, 2015.
[201]
E. Roos, A. Karasev och P. G. Jönsson, "Effect of Si and Ce Contents on the Nozzle Clogging in a REM Alloyed Stainless Steel," Steel Research International, vol. 86, no. 11, s. 1279-1288, 2015.
[202]
C. Médioni, P. G. Jönsson och S. Du, "Effect of Stirring Practice on Sulphur and Nitrogen Refining as well as Inclusion Removal in Ladle Treatment," Steel Research International, vol. 86, no. 12, s. 1498-1507, 2015.
[203]
H. Bai, M. Ersson och P. Jonsson, "Effect of TurboSwirl Structure on an Uphill Teeming Ingot Casting Process," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 46, no. 6, s. 2652-2665, 2015.
[204]
Z. Tan, M. Ersson och P. G. Jönsson, "Effect of TurboSwirl on Inclusions during Ingot Casting of Steels," Mathematical problems in engineering (Print), 2015.
[205]
C. Xuan et al., "Effect of the Ti, Al Contents on the Inclusion Characteristics in Steels with TiO2 and TiN Particle Additions," Steel Research International, vol. 86, 2015.
[206]
D. Janis, A. Karasev och P. G. Jönsson, "Evaluation of Inclusion Characteristics in Low-Alloyed Steels by Mainly Using the PDA/OES Method," ISIJ International, vol. 55, no. 10, s. 2173-2181, 2015.
[207]
M. Nabeel, A. Karasev och P. G. Jönsson, "Formation and Growth Mechanism of Clusters in Liquid REM-alloyed Stainless Steels," ISIJ International, vol. 55, no. 11, s. 2358-2364, 2015.
[208]
Y. Cheng et al., "Improvement and optimization of the growth quality of upright ZnOrod arrays by the response surface methodology," Applied Surface Science, vol. 351, s. 451-459, 2015.
[209]
Y. Yang et al., "Inclusion Behavior under a Swirl Flow in a Submerged Entry Nozzle and Mold," Steel Research International, vol. 86, no. 4, s. 341-360, 2015.
[210]
A. Davydenko et al., "Investigation of Slag Foaming by Additions of Briquettes in the EAF during Stainless Steel Production," Steel Research International, vol. 86, no. 2, s. 146-153, 2015.
[211]
Y. Xu, M. Ersson och P. Jönsson, "Numerical Simulation of Single Argon Bubble Rising in Molten Metal Under a Laminar Flow," Steel Research International, vol. 86, no. 11, s. 1289-1297, 2015.
[212]
X. Zhou et al., "Numerical and Physical Simulations of a Combined Top-Bottom-Side Blown Converter," Steel Research International, vol. 86, no. 11, s. 1328-1338, 2015.
[213]
Y. Cheng et al., "Optimization of high-quality vertically aligned ZnO rod arrays by the response surface methodology," Journal of Alloys and Compounds, vol. 626, s. 180-188, 2015.
[214]
J. Bu, P. G. Jönsson och Z. Zhao, "Preparation of 30 mol.% Y-doped hafnia (Hf0.7Y0.3O2-delta) using a modified solid-state reaction method," Ceramics International, vol. 41, no. 2, s. 2611-2615, 2015.
[215]
J. Bu, P. G. Jönsson och Z. Zhao, "Sintering behaviour of the protonic conductors BaZr(x)Ce(0.8-x)Ln(0.2)O(3-delta) (x=0.8, 0.5, 0.1; Ln=Y, Sm, Gd, Dy) during the solid-state reactive-sintering process," Ceramics International, vol. 41, no. 2, s. 2558-2564, 2015.
[216]
N. Ånmark, A. Karasev och P. G. Jönsson, "The Effect of Different Non-Metallic Inclusions on the Machinability of Steel," Materials, vol. 8, no. 2, s. 751-783, 2015.
[217]
Y. Yang et al., "The Influence of Swirl Flow on the Flow Field, Temperature Field and Inclusion Behavior When Using a Half Type Electromagnetic Swirl Flow Generator in a Submerged Entry Nozzle and Mold," Steel Research International, vol. 86, no. 11, s. 1312-1327, 2015.
[218]
N. Ånmark et al., "The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools," Wear, vol. 334, s. 13-22, 2015.
[219]
A. Gauffin et al., "Use of volume correlation model to calculate lifetime of end-of-life steel," Ironmaking & steelmaking, vol. 42, no. 2, s. 88-96, 2015.
[220]
C. Xuan et al., "Wettability of Al2O3, MgO and Ti2O3 by Liquid Iron and Steel," ISIJ International, vol. 55, no. 9, s. 1882-1890, 2015.
[221]
C. Xuan et al., "Wettability of TiN by Liquid Iron and Steel," ISIJ International, vol. 55, no. 8, s. 1642-1651, 2015.
[222]
A. Tilliander, L. T. I. Jonsson och P. G. Jönsson, "A Three-Dimensional Three-Phase Model of Gas Injection in AOD Converters," Steel Research International, vol. 85, no. 3, s. 376-387, 2014.
[223]
Z. Song, M. Ersson och P. G. Jönsson, "A study of post-combustion in an AOD flue," Steel Research International, vol. 85, no. 7, s. 1173-1184, 2014.
[224]
E. Roos, A. Karasev och P. G. Jönsson, "An Experimental and Thermodynamic Study of Non-Metallic Inclusions in High Si Stainless Steels Regarding Clogging During Casting," Steel Research International, vol. 85, no. 10, s. 1410-1417, 2014.
[225]
D. Janis et al., "Application of Different Extraction Methods for Investigation of Nonmetallic Inclusions and Clusters in Steels and Alloys," Advances in Materials Science and Engineering, vol. 2014, s. 210486, 2014.
[226]
A. Davydenko et al., "Characterization of Briquettes Used for Slag Foaming in the EAF during Stainless Steel Production," Steel Research International, vol. 86, no. 2, s. 137-145, 2014.
[227]
Y. Cheng, P. G. Jönsson och Z. Zhao, "Controllable fabrication of large-area 2D colloidal crystal masks with large size defect-free domains based on statistical experimental design," Applied Surface Science, vol. 313, s. 144-151, 2014.
[228]
W. Mu, P. G. Jönsson och K. Nakajima, "Effect of Sulfur Content on Inclusion and Microstructure Characteristics in Steels with Ti2O3 and TiO2 Additions," ISIJ International, vol. 54, no. 12, s. 2907-2916, 2014.
[229]
A. J. B. Muwanguzi et al., "Effect of different factors on low temperature degradation of hematite iron ore during reduction," Metallurgical Research and Technology, vol. 111, no. 1, s. 57-66, 2014.
[230]
J. Wang et al., "Fabrication of novel g-C3N4/nanocage ZnS composites with enhanced photocatalytic activities under visible light irradiation," CrystEngComm, vol. 16, no. 21, s. 4485-4492, 2014.
[231]
Y. Bi, A. Karasev och P. G. Jönsson, "Investigations of inclusions in ferrochromium alloys," Ironmaking & steelmaking, vol. 41, no. 10, s. 756-762, 2014.
[232]
J. Bu, P. G. Jönsson och Z. Zhao, "Ionic conductivity of dense BaZr(0.5)Ce(0.3)Ln(0.2)O(3-delta) (Ln = Y, Sm, Gd, Dy) electrolytes," Journal of Power Sources, vol. 272, s. 786-793, 2014.
[233]
X. Zhou et al., "Mathematical and physical simulation of a top blown converter," Steel Research International, vol. 85, no. 2, s. 273-281, 2014.
[234]
P. Ni et al., "On the deposition of particles in liquid metals onto vertical ceramic walls," International Journal of Multiphase Flow, vol. 62, s. 152-160, 2014.
[235]
X. Zhou et al., "Optimization of Combined Blown Converter Process," ISIJ International, vol. 54, no. 10, s. 2255-2262, 2014.
[236]
F. Persson, A. Eliasson och P. G. Jönsson, "Oxidation of Water Atomized Metal Powders," Steel Research International, vol. 85, no. 12, s. 1629-1638, 2014.
[237]
H. Zhang et al., "Partial Equilibrium Prediction of Solidification and Carbide Precipitation in Ti-added High Cr Cast Irons," ISIJ International, vol. 54, no. 2, s. 374-383, 2014.
[238]
I. Kasimagwa, V. Brabie och P. G. Jönsson, "Slag corrosion of MgO-C refractories during secondary steel refining," Ironmaking & steelmaking, vol. 41, no. 2, s. 121-131, 2014.
[239]
P. Ni et al., "The Use of an Enhanced Eulerian Deposition Model to Investigate Nozzle Clogging During Continuous Casting of Steel," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 45, no. 6, s. 2414-2424, 2014.
[240]
Y. Bi, A. Karasev och P. G. Jönsson, "Three Dimensional Evaluations of REM Clusters in Stainless Steel," ISIJ International, vol. 54, no. 6, s. 1266-1273, 2014.
[241]
Y. Bi, A. Karasev och P. G. Jönsson, "Three-dimensional investigations of inclusions in ferroalloys," Steel Research International, vol. 85, no. 4, s. 659-669, 2014.
[242]
J. Wang et al., "Visible light-driven g-C3N4/m-Ag2Mo2O7 composite photocatalysts : synthesis, enhanced activity and photocatalytic mechanism," RSC Advances, vol. 4, no. 92, s. 51008-51015, 2014.
[243]
R. Safavi Nick et al., "A mathematical model of the solid flow behavior in a real dimension blast furnace : Effects of the solid volume fraction on the velocity profile," Steel Research International, vol. 84, no. 10, s. 999-1010, 2013.
[244]
Y. Kanbe et al., "Determination of Size Distribution and Probable Maximum Size of Inclusions in AISI304 Stainless Steel," ISIJ International, vol. 53, no. 11, s. 1968-1973, 2013.
[245]
Q. Liu et al., "Dynamic Precipitation Behavior of Secondary M7C3 Carbides in Ti-alloyed High Chromium Cast Iron," ISIJ International, vol. 53, no. 7, s. 1237-1244, 2013.
[246]
J. Janis et al., "Effect of Secondary Nitride Particles on Grain Growth in a Fe-20 mass% Cr Alloy Deoxidised with Ti and Zr," ISIJ International, vol. 53, no. 3, s. 476-483, 2013.
[247]
J. Janis et al., "Effects of Primary Oxide and Oxide-Nitride Particles on the Solidification Structure in a Fe-20 mass%Cr Alloy Deoxidised with Ti and M (M = Zr or Ce)," ISIJ International, vol. 53, no. 2, s. 221-229, 2013.
[248]
Q. Liu, P. G. Jönsson och K. Nakajima, "Estimation of the Maximum Carbide Size in a Hypereutectic High Chromium Cast Iron Alloyed with Titanium," ISIJ International, vol. 53, no. 12, s. 2176-2183, 2013.
[249]
Y. Bi, A. V. Karasev och P. G. Jönsson, "Evolution of Different Inclusions during Ladle Treatment and Continuous Casting of Stainless Steel," ISIJ International, vol. 53, no. 12, s. 2099-2109, 2013.
[250]
N. Andersson et al., "Fundamental decarburisation model of AOD process," Ironmaking & steelmaking, vol. 40, no. 5, s. 390-397, 2013.
[251]
K. Malmberg et al., "Influence of final stirring treatment on inclusion number in tool steel," Ironmaking & steelmaking, vol. 40, no. 6, s. 407-412, 2013.
[252]
N. Andersson et al., "Investigating the effectof slag on decarburization in an AOD converter using a fundamental model," Steel Research International, vol. 84, no. 2, s. 169-177, 2013.
[253]
A. Gauffin et al., "KTH Steel Scrap Model : Iron and Steel Flow in the Swedish Society 1889–2010," Journal for Manufacturing Science and Production, vol. 13, no. 1/2, s. 47-54, 2013.
[254]
R. Safavi Nick et al., "Mathematical Model of Solid Flow Behavior in a Real Dimension Blast Furnace," ISIJ International, vol. 53, no. 6, s. 979-987, 2013.
[255]
N. Arzpeyma et al., "Mathematical Modeling of Scrap Melting in an EAF Using Electromagnetic Stirring," ISIJ International, vol. 53, no. 1, s. 48-55, 2013.
[256]
K. Malmberg et al., "Optimisation of stirring conditions during vacuum degassing in order to lower inclusion content in tool steel," Ironmaking & steelmaking, vol. 40, no. 3, s. 231-237, 2013.
[257]
N. Andersson et al., "Preliminary investigation of influence of temperature on decarburisation using fundamental AOD model," Ironmaking & steelmaking, vol. 40, no. 7, s. 551-558, 2013.
[258]
K. Steneholm et al., "Removal of hydrogen, nitrogen and sulphur from tool steel during vacuum degassing," Ironmaking & steelmaking, vol. 40, no. 3, s. 199-205, 2013.
[259]
P. Ni, L. Jonsson och P. Jönsson, "Simulations of the LadleTeeming Process and Verification With Pilot Experiment," Steel Research International, vol. 84, no. 3, s. 276-287, 2013.
[260]
P. Ni et al., "Turbulent Flow Phenomena and Ce2O3 Behavior during a Steel Teeming Process," ISIJ International, vol. 53, no. 5, s. 792-801, 2013.
[261]
Z. Tan et al., "Uphill Teeming Utilizing TurboSwirl to Control Flow Pattern in Mold," Steel Research International, vol. 84, no. 9, s. 837-844, 2013.
[262]
N. Å. I. Andersson et al., "An in-Depth Model-Based Analysis of Decarburization in the AOD Process," Steel Research International, vol. 83, no. 11, s. 1039-1052, 2012.
[263]
O. Ericsson et al., "Changes in inclusion characteristics during sampling of liquid steel," Ironmaking & Steelmaking, vol. 39, no. 1, s. 67-75, 2012.
[264]
A. J. B. Muwanguzi et al., "Characterisation of the Physical and Metallurgical Propertiesof Natural Iron Ore for Iron Production," ISRN Materials Science, vol. 2012, s. 9, 2012.
[265]
A. J. B. Muwanguzi et al., "Characterization of chemical composition and microstructure of natural iron ore from Muko deposits," ISRN Materials Science, vol. 2012, s. 9, 2012.
[266]
S. Mostafaee et al., "Computational thermodynamics as a tool to study the microstructural evolution of EAF duplex stainless steelmaking slags," Ironmaking & steelmaking, vol. 39, no. 1, s. 51-58, 2012.
[267]
Q. Liu et al., "Effect of cooling rate and Ti addition on the microstructure and mechanical properties in as-cast condition of hypereutectic high chromium cast irons," ISIJ International, vol. 52, no. 12, s. 2210-2219, 2012.
[268]
Q. Liu et al., "Effect of heat treatment on microstructure and mechanical properties of Ti-alloyed hypereutectic high chromium cast iron," ISIJ International, vol. 52, no. 12, s. 2288-2294, 2012.
[269]
A. Dahlin et al., "Influence of ladle slag additions on BOF process performance," Ironmaking & steelmaking, vol. 39, no. 5, s. 378-385, 2012.
[270]
A. Dahlin et al., "Influence of ladle slag additions on BOF process under production conditions," Ironmaking & steelmaking, vol. 39, no. 5, s. 318-326, 2012.
[271]
F. Persson, A. Eliasson och P. G. Jönsson, "Influence of liquid metal properties on water atomised iron powders," ISIJ International, vol. 52, no. 12, s. 2130-2138, 2012.
[272]
M. Swartling et al., "Interpretation of Tap Induced Cyclic Temperatures in the Blast Furnace Lining," Steel Research International, vol. 83, no. 7, s. 695-704, 2012.
[273]
R. Gyllenram, S. Ekerot och P. Jönsson, "Lubricating the recycling machine," Revue de métallurgie (Imprimé), vol. 109, no. 5, s. 349-358, 2012.
[274]
Z. Tan, M. Ersson och P. G. Jönsson, "Modeling of Initial Mold Filling with Utilization of Swirl Blades," ISIJ International, vol. 52, no. 6, s. 1066-1071, 2012.
[275]
M. Pal och P. Jönsson, "Multiphysics modeling of an induction-stirred ladle in two and three dimensions," International Journal for Numerical Methods in Fluids, vol. 70, no. 11, s. 1378-1392, 2012.
[276]
F. Persson, A. Eliasson och P. Jönsson, "Prediction of particle size for water atomised metal powders : parameter study," Powder Metallurgy, vol. 55, no. 1, s. 45-53, 2012.
[277]
Y. Kanbe et al., "Analysis of Largest Sulfide Inclusions in Low Carbon Steel by Using Statistics of Extreme Values," Steel Research International, vol. 82, no. 4, s. 313-322, 2011.
[278]
Y. Kanbe et al., "Application of Extreme Value Analysis for Two- and Three-Dimensional Determinations of the Largest Inclusion in Metal Samples," ISIJ International, vol. 51, no. 4, s. 593-602, 2011.
[279]
Y. Kanbe et al., "Application of Statistics of Extreme Values for Inclusions in Stainless Steel on Different Stages of Steel Making Process," ISIJ International, vol. 51, no. 12, s. 2056-2063, 2011.
[280]
M. Ersson et al., "Dynamic modelling of steel, slag and gas during initial blowing in a top-blown converter," Steel Grips - Journal of Steel and Related Materials, no. 9, s. 41-47, 2011.
[281]
O. Ericsson, A. Karasev och P. Jönsson, "Effect of Slag Protection System and Sample Geometry on Homogeneity of Total Oxygen Content in Samples from Liquid Steel," Steel Research International, vol. 82, no. 3, s. 222-229, 2011.
[282]
A. V. Karasev, H. Suito och P. G. Jönsson, "Effects of Soluble Ti and Zr Content and Austenite Grain Size on Microstructure of the Simulated Heat Affected Zone in Fe-C-Mn-Si Alloy," ISIJ International, vol. 51, no. 9, s. 1524-1533, 2011.
[283]
Z. Tan, M. Ersson och P. G. Jönsson, "Mathematical Modeling of Initial Filling Moment of Uphill Teeming Process Considering a Trumpet," ISIJ International, vol. 51, no. 9, s. 1461-1467, 2011.
[284]
Z. Song, M. Ersson och P. G. Jönsson, "Mathematical Modeling of VOD Oxygen Nozzle Jets," Steel Research International, vol. 82, no. 3, s. 249-259, 2011.
[285]
Z. Song, M. Ersson och P. G. Jönsson, "Mathematical comparison of two VOD nozzle jets," ISIJ International, vol. 51, no. 10, s. 1637-1646, 2011.
[286]
S. Mostafaee, M. Andersson och P. Jönsson, "Petrographical study of microstructural evolution of EAF duplex stainless steelmaking slags," Ironmaking & steelmaking, vol. 38, no. 2, s. 90-100, 2011.
[287]
N. Kojola, S. Ekerot och P. Jönsson, "Pilot plant study of clogging rates in low carbon and stainless steel grades," Ironmaking & steelmaking, vol. 38, no. 2, s. 81-89, 2011.
[288]
N. Kojola et al., "Pilot plant study of nozzle clogging mechanisms during casting of REM treated stainless steels," Ironmaking & steelmaking, vol. 38, no. 1, s. 1-11, 2011.
[289]
A. Memarpour, V. Brabie och P. Jönsson, "Studies of effect of glass/silicon powder coatings on clogging behaviour of submerged entry nozzles when using REM alloyed stainless steels," Ironmaking & steelmaking, vol. 38, no. 3, s. 229-239, 2011.
[290]
A. Memarpour, V. Brabie och P. G. Jönsson, "Studies on the decarburization of the commercial Submerged Entry Nozzles," Steel Grips - Journal of Steel and Related Materials, vol. 9, 2011.
[291]
H. Doostmohammadi, A. Karasev och P. G. Jönsson, "A Comparison of a Two-Dimensional and a Three-Dimensional Method for Inclusion Determinations in Tool Steel," STEEL RES INT, vol. 81, no. 5, s. 398-406, 2010.
[292]
L. Hallgren et al., "A First Attempt to Implement a Swirl Blade in Production of Ingots," ISIJ International, vol. 50, no. 12, s. 1763-1769, 2010.
[293]
Z. Zhang et al., "A Numerical Study of Swirl Blade Effects in Uphill Teeming Casting," ISIJ International, vol. 50, no. 12, s. 1756-1762, 2010.
[294]
J. Janis et al., "An experimental study on the influence of particles on grain boundary migration," Journal of Materials Science, vol. 45, no. 8, s. 2233-2238, 2010.
[295]
O. Ericsson, A. Karasev och P. Jönsson, "Experimental study of parameters for liquid steel sampling," Steel Grips - Journal of Steel and Related Materials, vol. 8, s. 115-124, 2010.
[296]
M. Swartling et al., "Experimentally determined temperatures in blast furnace hearth," Ironmaking & steelmaking, vol. 37, no. 1, s. 21-26, 2010.
[297]
M. Swartling et al., "Heat Transfer Modelling of a Blast Furnace Hearth," STEEL RES INT, vol. 81, no. 3, s. 186-196, 2010.
[298]
H. Doostmohammadi et al., "Inclusion Characteristics of Bearing Steel in a Runner after Ingot Casting," STEEL RES INT, vol. 81, no. 2, s. 142-149, 2010.
[299]
Z. Zhang, A. Tilliander och P. Jönsson, "Mathematical Modelling of Water Sampler Filling," Steel Research International, vol. 81, no. 2, s. 112-122, 2010.
[300]
K. Nakajima et al., "Methodological Progress for Computer Simulation of Solidification and Casting," ISIJ International, vol. 50, no. 12, s. 1724-1734, 2010.
[301]
P. Ternstedt et al., "Mixing Time in a Side-Blown Converter," ISIJ International, vol. 50, no. 5, s. 663-667, 2010.
[302]
K. J. Malmberg et al., "Observed behavior of various oxide inclusions in front of a solidifying low-carbon steel shell," Journal of Materials Science, vol. 45, no. 8, s. 2157-2164, 2010.
[303]
S. Mostafaee, M. Andersson och P. Jönsson, "Petrographic and thermodynamic study of slags in EAF stainless steelmaking," Ironmaking & steelmaking, vol. 37, no. 6, s. 425-436, 2010.
[304]
M. Swartling et al., "Short-term Lining Temperature Changes during Tapping in a Blast Furnace," Steel Research International, vol. 81, no. 9, s. 724-734, 2010.
[305]
Z. Zhang, A. Tilliander och P. Jönsson, "Simulation of the Filling of a Liquid Steel Sampler," Steel Research International, vol. 81, no. 9, s. 749-758, 2010.
[306]
Z. Zhang et al., "Simulation of the Steel Sampling Process," ISIJ International, vol. 50, no. 12, 2010.
[307]
J. Björklund, M. Andersson och P. Jönsson, "The Influence of Vacuum Treatment on Inclusion Composition : Laboratory Study," High Temperature Materials and Processes, vol. 29, no. 3, s. 189-202, 2010.
[308]
J. Björklund, M. Andersson och P. Jönsson, "The Influence of Vacuum Treatment on Inclusion Composition : Theoretical Study," High Temperature Materials and Processes, vol. 29, no. 3, s. 179-187, 2010.
[309]
A. Memarpour, V. Brabie och P. Jönsson, "The effect of Zirconium Disilicide (ZrSi2) additions on the carbon oxidation behavior of alumina/Graphite refractory materials," ISIJ International, vol. 50, no. 11, s. 1612-1621, 2010.
[310]
H. Doostmohammadi et al., "Use of Computational Thermodynamic Calculations in Studying the Slag/Steel Equilibrium during Vacuum Degassing," STEEL RES INT, vol. 81, no. 1, s. 31-39, 2010.
[311]
J. Janis et al., "Characteristics of Ti-Ce Complex Deoxidation Products in a Fe-20mass%Cr Alloy," STEEL RES INT, vol. 80, no. 6, s. 450-456, 2009.
[312]
J. Gustavsson, M. A.T. Andersson och P. Jönsson, "Comparison of calculated equilibrium and operation data for blast furnace with focus on silicon," Ironmaking & steelmaking, vol. 36, no. 5, s. 341-353, 2009.
[313]
N. Kojola, S. Yokoya och P. Jönsson, "Effect of Interfacial Energy on the Drain Sink Formation Height," ISIJ International, vol. 49, no. 4, s. 463-469, 2009.
[314]
R. Safavi Nick et al., "Effect of Particle Properties on the Solid Flow Profile in a Blast Furnace," Journal of Iron and Steel Research International, vol. 16, no. Part 2 Suppl. 2, s. 1112-1115, 2009.
[315]
M. Söder, P. Jönsson och L. Jonsson, "Growth of Small Alumina Clusters during Ladle Deoxidation," High Temperature Materials and Processes, vol. 28, no. 6, s. 347-368, 2009.
[316]
M. Swartling et al., "Heat Transfer Study of Blast Furnace 2 at SSAB Oxelösund," Journal of Iron and Steel Research International, vol. 16, no. Part 2 Suppl. 2, s. 1131-1136, 2009.
[317]
D. S. Sarma, A. Karasev och P. Jönsson, "On the Role of Non-metallic Inclusions in the Nucleation of Acicular Ferrite in Steels," ISIJ International, vol. 49, no. 7, s. 1063-1074, 2009.
[318]
Z. Zhang et al., "Physical modeling of a sampler filling for molten steel," ISIJ International, vol. 49, no. 10, s. 1522-1529, 2009.
[319]
N. Kojola et al., "Prediction and Disarming of Drain Sink Formation during Unsteady-state Bottom Teeming," ISIJ International, vol. 49, no. 1, s. 1-9, 2009.
[320]
M. Ersson et al., "A Mathematical Model of an Impinging Air Jet on a Water Surface," ISIJ International, vol. 48, no. 4, s. 377-384, 2008.
[321]
J. Wikström et al., "Application of a model for liquid inclusion separation at a steel-slag interface for laboratory and industrial situations," Steel Research International, vol. 79, no. 11, s. 826-834, 2008.
[322]
L. T. I. Jonsson, E. Karlsson och P. Jönsson, "Aspects of particulate dry deposition in the urban environment," Journal of Hazardous Materials, vol. 153, no. 1-2, s. 229-243, 2008.
[323]
S. Jansson, V. Brabie och P. Jönsson, "Corrosion mechanism of commercial MgO-C refractories in contact with different gas atmospheres," ISIJ International, vol. 48, no. 6, s. 760-767, 2008.
[324]
S. Jansson, V. Brabie och P. Jönsson, "Corrosion mechanism of commercial doloma refractories in contact with CaO-Al2O3-SiO2-MgO slag," Ironmaking & steelmaking, vol. 35, no. 2, s. 99-107, 2008.
[325]
J. Ekengard, M. A.T. Andersson och P. G. Jönsson, "Distribution of metal droplets in top slags during ladle treatment," Ironmaking & steelmaking, vol. 35, no. 8, s. 575-588, 2008.
[326]
M. Ersson et al., "Dynamic Coupling of Computational Fluid Dynamics and Thermodynamics Software : Applied on a Top Blown Converter," ISIJ International, vol. 48, no. 2, s. 147-153, 2008.
[327]
J. Björklund et al., "Effect of Temperature on Oxygen Activity during Ladle Treatment," ISIJ International, vol. 48, no. 4, s. 438-445, 2008.
[328]
S. Kholmatov et al., "Effect of nozzle angle on flow field and temperature distribution in a billet mould when using swirl flow," STEEL RES INT, vol. 79, no. 1, s. 31-39, 2008.
[329]
P. Jönsson et al., "Focus on clean steel within Jernkontoret's Research - an overview," Revue de métallurgie (Imprimé), vol. 105, no. 6, s. 317-326, 2008.
[330]
J. Wikström et al., "In situ studies of agglomeration between Al2O3-CaO inclusions at metal/gas, metal/slag interfaces and in slag," Ironmaking & steelmaking, vol. 35, no. 8, s. 589-599, 2008.
[331]
J. Appelberg et al., "In situ studies of misch-metal particle behavior on a molten stainless steel surface," Materials Science & Engineering : A, vol. 495, no. 1-2, s. 330-334, 2008.
[332]
J. Wikström et al., "In situ studies of the agglomeration phenomena for calcium-alumina inclusions at liquid steel-liquid slag interface and in the slag," Materials Science & Engineering : A, vol. 495, no. 1-2, s. 316-319, 2008.
[333]
S. Kholmatov et al., "Influence of Aspect Ratio on Fluid Flow and Heat Transfer in Mould when Using Swirl Flow during Casting," STEEL RES INT, vol. 79, no. 9, s. 698-707, 2008.
[334]
H. Solhed, L. Jonsson och P. Jönsson, "Modelling of the steel/slag interface in a continuous casting tundish," Steel Research International, vol. 79, no. 5, s. 348-357, 2008.
[335]
M. Warne et al., "Size distribution of deoxidation products with Ti, Pr and Ti/Pr in Fe-10mass%Ni alloy," ISIJ International, vol. 48, no. 3, s. 310-319, 2008.
[336]
J. Björklund et al., "The Effect of Ladle Treatment on Inclusion Composition in Tool Steel Production," Steel Research International, vol. 79, no. 4, s. 261-270, 2008.
[337]
Y. Tsukaguchi et al., "Design of swirling flow submerged entry nozzles for optimal head consumption between tundish and Mold," ISIJ International, vol. 47, no. 10, s. 1436-1443, 2007.
[338]
S. Kholmatov et al., "Development of flow field and temperature distribution during changing divergent angle of the nozzle when using swirl flow in a square continuous casting billet mould," ISIJ International, vol. 47, no. 1, s. 80-87, 2007.
[339]
L. Hallgren et al., "Effect of nozzle type and swirl on flow pattern for initial filling conditions in the mould for up-hill teeming," Steel Research International, vol. 78, no. 3, s. 254-259, 2007.
[340]
K. Steneholm et al., "Effect of top slag composition on inclusion characteristics during vacuum degassing of tool steel," Steel Research International, vol. 78, no. 7, s. 522-530, 2007.
[341]
J. Björklund, M. Andersson och P. Jönsson, "Equilibrium between slag, steel and inclusions during ladle treatment : comparison with production data," Ironmaking & steelmaking, vol. 34, no. 4, s. 312-324, 2007.
[342]
J. Ekengard, M. A.T. Andersson och P. Jönsson, "Theoretical study of equilibrium reactions between metal droplets and slag," Steel Research International, vol. 78, no. 2, s. 109-116, 2007.
[343]
A. Nordquist et al., "A physical model study of swirl phenomena in a top blown bath," Steel Research International, vol. 77, s. 234-241, 2006.
[344]
K. Steneholm, M. A.T. Andersson och P. Jönsson, "Change of inclusion characteristics during vacuum degassing of tool steel," Steel Research International, vol. 77, no. 6, s. 392-400, 2006.
[345]
J. Gustavsson et al., "Characteristics of metal droplets in slag tapped from the blast furnace," Steel Research International, vol. 77, no. 1, s. 5-13, 2006.
[346]
L. Hallgren et al., "Effect of nozzle swirl blade on flow pattern in runner during uphill teeming," ISIJ International, vol. 46, no. 11, s. 1645-1651, 2006.
[347]
K. Nakajima et al., "Effect of oxide catalyst on heterogeneous nucleation in Fe-10mass%Ni alloys," ISIJ International, vol. 46, no. 6, s. 807-813, 2006.
[348]
M. Ersson et al., "Fluid Flow in a Combined Top and Bottom Blown Reactor," ISIJ International, vol. 46, no. 8, s. 1137-1142, 2006.
[349]
S. Jansson, V. Brabie och P. Jönsson, "Magnesia-carbon refractory dissolution in Al killed low carbon steel," Ironmaking & steelmaking, vol. 33, no. 5, s. 389-397, 2006.
[350]
M. Bjurstrom et al., "Physical-modeling study of fluid flow and gas penetration in a side-blown AOD converter," ISIJ International, vol. 46, no. 4, s. 523-529, 2006.
[351]
M. Andersson et al., "Some Aspects on Grain Refining Additions with Focus on Clogging during Casting," ISIJ International, vol. 46, no. 6, s. 814-823, 2006.
[352]
D. Widlund, D. S. Sarma och P. G. Jönsson, "Studies on decarburisation and desiliconisation of levitated Fe-C-Si alloy droplets," ISIJ International, vol. 46, no. 8, s. 1149-1157, 2006.
[353]
T. Hansen et al., "The concept of the liquid sampling and hot rolling method for determination of macro inclusion characteristics in steel," Steel Research International, vol. 77, no. 3, s. 177-185, 2006.
[354]
A. Nordquist et al., "The effect of nozzle diameter, lance height and flow rate on penetration depth in a top-blown water model," Steel Research International, vol. 77, s. 82-90, 2006.
[355]
T. Hansen et al., "The use of the LSHR sampler to determine total oxygen contents in the ladle and tundish for different steel grades," Steel Research International, vol. 77, no. 8, s. 550-557, 2006.
[356]
J. Strandh et al., "A mathematical model to study liquid inclusion behavior at the steel-slag interface," ISIJ International, vol. 45, no. 12, s. 1838-1847, 2005.
[357]
J. Gustavsson, M. A.T. Andersson och P. Jönsson, "A thermodynamic study of silicon containing gas around a blast furnace raceway," ISIJ International, vol. 45, no. 5, s. 662-668, 2005.
[358]
M. Söder et al., "An experimental study of number concentration gradients of inclusion during deoxidation using inductive and gas stirring," Steel Research International, vol. 76, no. 7, s. 481-490, 2005.
[359]
S. Jansson, V. Brabie och P. Jönsson, "Corrosion mechanism and kinetic behaviour of MgO-C refractory material in contact with CaO-Al2O3-SiO2-MgO slag," Scandinavian journal of metallurgy, vol. 34, no. 5, s. 283-292, 2005.
[360]
M. Almcrantz, M. A.T. Andersson och P. G. Jönsson, "Determination of inclusion characteristics in the Asea-SKF process using the modified spark-induced OES technique as a complement in studying the influence of top slag composition," Steel Research International, vol. 76, no. 9, s. 624-634, 2005.
[361]
P. Hellberg, L. T. I. Jonsson och P. Jönsson, "Mathematical modelling of the injection of coke oven gas into a blast furnace tuyere," Scandinavian journal of metallurgy, vol. 34, no. 5, s. 269-275, 2005.
[362]
J. Strandh et al., "Solid inclusion transfer at a steel-slag interface with focus on tundish conditions," ISIJ International, vol. 45, no. 11, s. 1597-1606, 2005.
[363]
M. Hallberg et al., "Sulfur and Hydrogen Refining during Vacuum Degassing : A New Concept for Process Control," Stahl und Eisen (1881), no. 5, s. 39-46, 2005.
[364]
M. Hallberg et al., "Sulphur and hydrogen refining during vacuum degassing : a new concept for process control," Stahl und Eisen (1881), vol. 125, no. 5, s. 39-48, 2005.
[365]
M. Hallberg, L. T. I. Jonsson och P. G. Jönsson, "A new approach to using modelling for on-line prediction of sulphur and hydrogen removal duving ladle refining," ISIJ International, vol. 44, no. 8, s. 1318-1327, 2004.
[366]
A. Andersson, M. A.T. Andersson och P. G. Jönsson, "A study of some elemental distributions between slag and hot metal during tapping of the blast furnace," Steel research, vol. 75, no. 5, s. 294-301, 2004.
[367]
R. Eriksson, P. Jönsson och A. Gustafsson, "Determination of inclusion characteristics in 'low-carbon' steel during up-hill teeming," Scandinavian journal of metallurgy, vol. 33, no. 3, s. 160-171, 2004.
[368]
R. Eriksson, L. Jonsson och P. G. Jönsson, "Effect of entrance nozzle design on the fluid flow in an ingot mold during filling," ISIJ International, vol. 44, no. 8, s. 1358-1365, 2004.
[369]
A. Tilliander, T. L. I. Jonsson och P. G. Jönsson, "Fundamental mathematical modeling of gas injection in AOD converters," ISIJ International, vol. 44, no. 2, s. 326-333, 2004.
[370]
M. Söder, P. Jönsson och L. Jonsson, "Inclusion growth and removal in gas stirred ladles," Steel research, vol. 75, no. 2, s. 128-138, 2004.
[371]
M. Söder, P. Jönsson och L. Jonsson, "Inclusion growth and removal in gas-stirred ladies," Steel research, vol. 75, no. 2, s. 128-138, 2004.
[372]
T. Sato et al., "Swinging motion of bath surface induced by side gas injection," ISIJ International, vol. 44, no. 11, s. 1787-1792, 2004.
[373]
S. Yokoya et al., "The effect of swirl flow in an immersion nozzle on the heat and fluid flow in a billet continuous casting mold," Scandinavian journal of metallurgy, vol. 33, no. 1, s. 22-28, 2004.
[374]
A. J. Andersson, M. A. T. Andersson och P. G. Jönsson, "Variation in hot metal and stag composition during tapping of blast furnace," Ironmaking & steelmaking, vol. 31, no. 3, s. 216-226, 2004.
[375]
R. Eriksson et al., "An experimental study of the velocity field during filling of an ingot mould," Steel research, vol. 74, no. 7, s. 423-430, 2003.
[376]
J. Cheng, R. Eriksson och P. Jönsson, "Determination of macroinclusions during clean steel production," Ironmaking & steelmaking, vol. 30, no. 1, s. 66-72, 2003.
[377]
T. Sjokvist et al., "Influence of ferromanganese additions on microalloyed engineering steel," Ironmaking & steelmaking, vol. 30, no. 1, s. 73-80, 2003.
[378]
J. Gustavsson, P. Hahlin och P. Jönsson, "Meltdown behaviour of pellets reduced in a laboratory reduction furnace," Scandinavian journal of metallurgy, vol. 32, no. 2, s. 100-111, 2003.
[379]
H. Solhed, L. Jonsson och P. Jönsson, "A theoretical and experimental study of continuous-casting tundishes focusing on slag-steel interaction," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 33, no. 2, s. 173-185, 2002.
[380]
H. Solhed, L. Jonsson och P. Jönsson, "A theoretical and experimental study ofcontinuous-casting tundishes focusing on slag-steel interaction," Metallurgical and materials transactions. B, process metallurgy and materials processing science, vol. 32B, s. 173-185, 2002.
[381]
A. Tilliander et al., "An experimental and numerical study of fluid flow in AOD Nozzles," Iron & steelmaker, vol. 29, no. 2, s. 51-57, 2002.
[382]
J. Gustavsson, M. A.T. Andersson och P. Jönsson, "Effect of selected model parameters on predicted RAFT data," Scandinavian journal of metallurgy, vol. 31, no. 5, s. 328-341, 2002.
[383]
D.-Y. Sheng et al., "Modeling micro-inclusion growth and separation in gas-stirred ladles," Scandinavian journal of metallurgy, vol. 31, no. 2, s. 134-147, 2002.
[384]
M. Söder, P. Jönsson och J. Alexis, "Most relevant mechanisms of inclusion growth in an induction-stirred ladle," Scandinavian journal of metallurgy, vol. 31, no. 3, s. 210-220, 2002.
[385]
M. A.T. Andersson et al., "Slag-metal reactions during ladle treatment with focus on desulphurisation," Ironmaking & steelmaking, vol. 29, no. 3, s. 224-232, 2002.
[386]
A. Jauhiainen et al., "The influence of stirring method on hydrogen removal during ladle treatment," Steel research, vol. 73, no. 3, s. 82-90, 2002.
[387]
T. Sjoqvist, P. Jönsson och O. Grong, "Inclusions in commercial low and medium carbon ferromanganese," Metallurgical and Materials Transactions. A, vol. 32, no. 5, s. 1049-1056, 2001.
[388]
M. Ramirez et al., "Modeling of a DC electric arc furnace - Mixing in the bath," ISIJ International, vol. 41, no. 10, s. 1146-1155, 2001.
[389]
M. A.T. Andersson et al., "The influence of different calcium-based additions on desulphurisation and inclusion characteristics," Scandinavian journal of metallurgy, vol. 30, no. 3, s. 127-135, 2001.
[390]
P. Jönsson och L. T. I. Jonsson, "The use of fundamental process models in studying ladle refining operations," ISIJ International, vol. 41, no. 11, s. 1289-1302, 2001.
[391]
M. M. Nzotta et al., "A study on the sulphide capacities of steelmaking slags," Scandinavian journal of metallurgy, vol. 29, no. 4, s. 177-184, 2000.
[392]
J. Alexis, P. Jönsson och L. Jonsson, "Heating and electromagnetic stirring in a ladle furnace – a simulationmodel," ISIJ International, vol. 40, no. 11, s. 1098-1104, 2000.
[393]
T. Sjoqvist et al., "Influence of calcium carbide slag additions on inclusion characteristics in steel," Ironmaking & steelmaking, vol. 27, no. 5, s. 373-380, 2000.
[394]
J. Alexis et al., "Modeling of a DC electric arc furnace - Heat transfer from the arc," ISIJ International, vol. 40, no. 11, s. 1089-1097, 2000.
[395]
C.-E. Grip et al., "Theoretical and practical study of thermal stratification and drainage in ladles of different geometry," Scandinavian journal of metallurgy, vol. 29, no. 1, s. 30-38, 2000.
[396]
J. Alexis, P. Jönsson och L. Jonsson, "A model of an induction-stirred ladle accounting for slag and surface deformation," ISIJ International, vol. 39, no. 8, s. 772-778, 1999.
[397]
C.-E. Grip et al., "Numerical predication and experimental verification of thermalstratification in pilot plant and production ladles," ISIJ International, vol. 39, no. 7, s. 715-721, 1999.
[398]
C.-E. Grip, L. Jonsson och P. Jönsson, "Prediction of emptying flows in ladles and verification with data fromtrace element plant trials," ISIJ International, vol. 37, no. 11, s. 1081-1090, 1997.
[399]
P. Jönsson, L. Jonsson och D. Sichen, "Viscosities of LF slag’s and their impact on ladle refining," ISIJ International, vol. 37, no. 11, s. 484-491, 1997.
[400]
P. Jönsson och L. Jonsson, "A model of gas-stirred ladle," Scandinavian journal of metallurgy, vol. 24, no. 5-6, s. 194-206, 1995.
Konferensbidrag
[401]
M. Al-Saadi et al., "A study of the static recrystallization behaviour of cast Alloy 825 after hot-compressions," i Journal of Physics: Conference Series, 2019.
[402]
T. Han, W. Yang och P. Jönsson, "Bio-fuels and magnetic activated carbon production via co-pyrolysis of lignin and ferrous salts and steam activation of produced bio-char," i ICAE 2019 - International Conference on Applied Energy, 2019.
[403]
A. Karasev et al., "Characterization of non-metallic inclusions in corrosion -resistance nickel - Based EP718 and 718 alloys by using electrolytic extraction method," i E3S Web of Conferences, 2019.
[404]
J. Yin, M. Ersson och P. Jönsson, "Effect of an angled runner on the fluid flow in the ingot casting process," i Proceedings for the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking, STEELSIM 2019, 2019, s. 41-50.
[405]
J. Svantesson, M. Ersson och P. Jönsson, "Numerical analysis of slag transfer in the IroNARC process," i Proceedings for the 8th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking, STEELSIM 2019, 2019, s. 521-530.
[406]
W. Wei et al., "Assessment of Scrap-based Production for Low Phosphorus Stainless Steel," i China Symposium on Sustainable Steelmaking, 2018.
[407]
M. Nabeel et al., "Characterization of inclusions in high-Mn steel using two-dimensional and three-dimensional methods," i AISTech - Iron and Steel Technology Conference Proceedings, 2018, s. 1483-1491.
[408]
M. Al-Saadi et al., "Comparative Study of Microstructures Evolution of Columnar and Equiaxed Grain Structurs in Alloy 825 after Hot Compression," i 3rd InternationalConference on Ingot Casting, Rolling and Forging, ICRF2018, in Stockholm, 16-19October, 2018.
[409]
M. Al-Saadi et al., "Microstructure characterisation in alloy 825," i 17th International Conference on Metal Forming, Metal Forming 2018, 16-19 September 2018, Toyohashi, Japan, 2018, s. 1626-1634.
[410]
T. Yoshioka et al., "The effect of a sulfur addition on the formation and behavior of cas inclusions during a secondary refining process without using a Ca-treatment," i International Symposium on Materials Processing Fundamentals, 2018, 2018, s. 3-13.
[411]
H. Du et al., "Using chip weight distribution as a method to define chip breakability during machining," i Proceedings 8th Swedish Production Symposium (SPS), 2018, s. 309-315.
[412]
P. Svidró, A. Diószegi och P. Jönsson, "Extended Method of Volume Change Measurements During Solidification of Lamellar Graphite Iron," i International Symposium on the Science and Processing of Cast Iron (SPCI-XI), 2017.
[413]
C. Schmidt et al., "Measurement techniques for meltdown control in a stainless steel AC electric arc furnace," i ESSC and DUPLEX 2017 - 9th European Stainless Steel Conference - Science and Market and 5th European Duplex Stainless Steel Conference and Exhibition, 2017.
[414]
I. N. Zaini, Y. Weihong och P. G. Jönsson, "Steam gasification of solid recovered fuel char derived from landfill waste : A kinetic study," i Proceedings of the 9th International Conference on Applied Energy, 2017, s. 723-729.
[415]
E. Sjöqvist Persson, A. Karasev och P. Jönsson, "Studies of three dimension inclusions from ESR remelted and conventional steel," i LMPC 2017, Liquid Metal Processing and Casting Conference, TMS, USA, Philadelphia, USA, 10-13 September 2017., 2017.
[416]
W. Mu et al., "Wetting and agglomeration behavior of inclusion and intragranular ferrite formation kinetics in steel with TiO2 addition according to inclusion engineering," i AISTech - Iron and Steel Technology Conference Proceedings, 2017, s. 3027-3036.
[417]
M. Saffari Pour et al., "The Behavior of Impurities During Producer Gas Implementation as Alternative Fuel in Steel Reheating Furnaces : A CFD and Thermo-Chemical Study," i ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2016.
[418]
P. Pirouznia et al., "A mathematical model of martempering of thin martensitic stainless steel strips," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 1027-1030.
[419]
X. Zhou et al., "A numerical study of mixing behavior in the bath of a converter," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 167-170.
[420]
H. Liu et al., "A simulation study of off-gas particles generated from contact between pellets in a laboratory test," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 972-976.
[421]
A. F. Yang, A. Karasev och P. Jönsson, "Behavior of metal droplets in slags during desulphurization of hot metal," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 80-83.
[422]
M. Nabeel, A. Karasev och P. Jönsson, "Characteristics of iron ore pellets and their influence on dust generation due to wear," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 966-969.
[423]
S. D. Iwnicki et al., "Design of the running gear for the SUSTRAIL freight vehicle," i Stephenson Conference Research for Railways 2015, 2015, s. 299-305.
[424]
N. Ånmark et al., "Effect of Different Inclusions on Mechanical Properties and Machinability of 20NiCrMo Carburizing Steels," i The 6th International Congress on the Science and Technology of Steelmaking (ICS2015), 2015, s. 805-808.
[425]
H. E. O. Kellner et al., "Effect of additions of FeTi70R alloy on inclusion characteristics in Fe-40Ni-20Cr steels," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 797-800.
[426]
W. Mu, P. Jönsson och K. Nakajima, "Effect of the inclusion size and sulfur content on the intragraunlar ferrite transformation in steels with Ti2O3 additions," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 767-771.
[427]
C. Schmidt et al., "Estimation of the molten state of scrap in an electric arc furnace by vibration measurements," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 279-282.
[428]
C. Chen et al., "Mathematical modelling of molten alloy mixing in a continuous casting tundish - A hydrodynamic study," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 407-411.
[429]
Y. Xu, M. Ersson och P. Jönsson, "Numerical simulation of bubble formation in a molten steel bath," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 366-369.
[430]
Y. Yang et al., "Numerical study of the molten steel flow and inclusion behavior in the SEN and mold when using a half type EMSFG," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 777-780.
[431]
M. Saffari Pour et al., "On the Implementation of Producer Gases as Alternative Fuels in Steel Reheating Furnaces," i Proccedings of ASME 2015 International Mechanical Engineering Congress and Exposition, 2015.
[432]
J. Svensson et al., "Post-mortem Studies of Submerged Entry Nozzles (SEN) Coated with Yttria Stabilized Zirconia (YSZ)," i The 6th International Congress on the Science and Technology of Steelmaking, Continuous Casting, Beijing, China, 12-14 May, 2015., 2015, s. 469-472.
[433]
R. Gyllenram, W. Wei och P. Jönsson, "Raw material assessment for electric arc furnace steelmaking," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 288-292.
[434]
P. Ni et al., "The development of an eulerian deposition model in liquid metal flows and its application on nozzle clogging during continuous casting of steel," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 439-442.
[435]
H. Bai, M. Ersson och P. Jönsson, "The physical and mathematical modelling of swirling flow by turboswirl in an uphill teeming ingot casting process," i Proceedings of the 6th International Congress on the Science and Technology of Steelmaking, ICS 2015, 2015, s. 473-476.
[436]
A. Alevanau et al., "Mechanically assisted low temperature pyrolysis of hydrocarbons," i Proceedings of the XVII International Conference Foundations & Advances in Nonlinear Science, September 29 - October 3, Minsk 2014, 2014.
[437]
N. Arzpeyma, M. Ersson och P. Jönsson, "Modeling of post combustion inside the off-gas duct system of the Ovako electric arc furnace," i CDF 2014 : 10th International Conference on CFD in Oil & Gas, Metallurgical and Process Industries, SINTEF, Trondheim, Norway, 17-19 June 2014, Proceedings, 2014.
[438]
J. Bu, P. Jönsson och Z. Zhao, "Preparation of Potential Protonic Conductor Yttria Doped Hafnia by Using the Modified Solid State Reaction Method," i ECS Transactions, 2014, s. 315-320.
[439]
J. Bu, P. Jönsson och Z. Zhao, "Preparation of Protonic Conductor BaZr0.5Ce0.3Ln0.2O3-δ (Ln = Y, Sm, Gd, Dy) by using a Solid State Reactive Sintering Method," i 13th International Ceramics Congress (CIMTEC2014), 2014, s. 1-5.
[440]
A. Gauffin, A. Tilliander och P. Jönsson, "Random sampling analysis on the alloy content in steel scrap and its impact on the electric arc furnace : ," i 2014 Shechtman International Symposium, 2014.
[441]
Y. Bi, A. V. Karasev och P. G. Jönsson, "Three-dimensional determinations of the non-metallic inclusions in different ferroalloys," i AISTech 2014 Iron and Steel Technology Conference, 5 May 2014 through 8 May 2014, Indianapolis, IN, 2014, s. 1849-1856.
[442]
A. Karasev, Y. Bi och P. G. Jönsson, "Three-dimensional investigation of large-size inclusions and clusters in steels by using the electrolytic extraction technique," i AISTech 2013 : proceedings of the Iron & steel technology conference : 6-9 May 2013, Pittsburgh, Pa., USA, 2013, s. 1139-1145.
[443]
Q. Liu et al., "Solidification and phase transformations of Ti-added hypereutectic high chromium cast irons," i 1st International Conference on Ingot Casting, Rolling and Forging, 2012.
[444]
D. Vasiljevic et al., "Application of Extraction Methods for Investigation of Non-Metallic Inclusions and Clusters in Alloys," i CETAS-2011 : proceedings of the 8th International Workshop on Progress in Analytical Chemistry and Materials Characterisation in the Steel and Metal Industries, 2011, s. 547-554.
[445]
A. V. Karasev, R. Inoue och P. G. Jönsson, "Application of Laser Ablation ICP Mass Spectrometry for Rapid Aalysis of Oxide Particles in Metal Samples," i CETAS-2011 : proceedings of the 8th International Workshop on Progress in Analytical Chemistry and Materials Characterisation in the Steel and Metal Industries, 2011, s. 487-494.
[446]
O. Ericsson, A. V. Karasev och P. G. Jönsson, "Effect of sampling conditions on inclusion characteristics in samples from liquid steel," i CETAS-2011 : proceedings of the 8th International Workshop on Progress in Analytical Chemistry and Materials Characterisation in the Steel and Metal Industries, 2011, s. 303-310.
[447]
D. Vasiljevic et al., "Evaluation of Inclusion Characteristics of Clusters and Material in a Clogged Nozzle," i EOSC-2011 : proceedings of the 6th European Oxygen Steelmaking Conference, 2011, s. 381-391.
[448]
A. Memarpour, V. Brabie och P. G. Jönsson, "Post-mortem study of the internal coated SENs (Submerged Entry Nozzle) respecting clogging phenomena," i The 7th European Conference on Continuous Casting (ECCC 2011),, 2011.
[449]
H. Doostmohammadi et al., "Effect of EAF Slag Carryover on Slag-metal Equilibrium Calculations for Ladle Degassing Process," i EPD CONGRESS 2009, PROCEEDINGS, 2009, s. 695-702.
[450]
M. Swartling et al., "Heat transfer study of blast furnace 2 at SSAB oxelosund," i 5th International Congress on the Science and Technology of Ironmaking, ICSTI 2009, 2009, s. 1131-1136.
[451]
O. Ericsson, A. V. Karasev och P. G. Jönsson, "Homogeneity of metal samples during sampling of liquid steel," i IAS-JICA 2009 : proceedings of the 17th Steelmaking Conference, 2009, s. 131-137.
[452]
J. Janis et al., "Characteristics of Ti-Ce complex deoxidation products in Fe-20mass% Cr alloy," i Scanmet III : Proceedings of the 3rd International Conference on Process Development in Iron and Steelmaking, 2008, s. 163-172.
[453]
A. Nordqvist et al., "Characterization of metal droplets sampled during top lance blowing," i Sohn International Symposium Advanced Processing of Metals and Materials : Vol 2 - THERMO AND PHYSICOCHEMICAL PRINCIPLES, 2006, s. 351-362.
[454]
M. Ersson, A. Tilliander och P. Jönsson, "Coupled thermodynamic and kinetic modeling of a top-blown bath," i Sohn International Symposium Advanced Processing of Metals and Materials, Vol 2 : Thermo And Physicochemical Principles: Iron And Steel Making, 2006, s. 271-281.
[455]
L. Hallgren et al., "Effect of swirl blade on flow pattern in nozzle for uphill teeming," i Sohn International Symposium Advanced Processing of Metals and Materials, Vol 2 : Thermo And Physicochemical Principles: Iron And Steel Making, 2006, s. 471-484.
[456]
H. Solhed, L. Jonsson och P. Jönsson, "Modeling of the Steel/Slag Interface in a Continuous Casting Tundish," i Int. Symp. On Advanced Fluid/Solid Science andTechnology in Experimental Mechanics, 2006, s. 381.
[457]
M. Pal, S. Kholmatov och P. Jönsson, "Numerical simulation of induction stirred ladle," i Proceedings of the COMSOL User´s Conference 2006 Birmingham, 2006.
[458]
S. Yokoya et al., "Swirling flow effect in immersion nozzle on control of heat and mass transport in casting teeming," i 2006 TMS Fall Extraction and Processing Division, 2006, s. 485-498.
[459]
M. Pal, R. Eriksson och P. Jönsson, "A computational fluid dynamics model of a 20Kg induction stirred laboratory scaled ladle," i Proceedings of the COMSOL Multiphysics User´s Conference 2005 Stockholm, 2005.
[460]
A. Nordquist, A. Tilliander och P. Jönsson, "A laboratory study of reactions in the hot spot area and in droplets during top lance blowing," i AISTech 2004 - Iron and Steel Technology Conference Proceedings, 15 September 2004 through 17 September 2004, Nashville, TN, United States, 2004, s. 743-749.
[461]
P. Jönsson et al., "Mathematical Modeling of Metallurgical Processes," i Simposio Nacional de Siderurgia, 2003, s. 48-66.
[462]
M. Hallberg, L. Jonsson och P. Jönsson, "The Use of FundamentalModels in Developing Practical Process Control Models for Sulphur and HydrogenRefining," i ISSTech 2003, 2003.
[463]
M. Söder et al., "Size distribution gradients of inclusions during stirring," i Proceedings of the 6th International Conference on Clean Steel, 2002, s. 48-57.
[464]
T. Hansén och P. Jönsson, "Some ideas of determining the macro inclusion characteristics during steelmaking.," i The 24th Electric Furnance Conference, Phoenix, Az, USA, Nov. 11-14 2004, 2001.
[465]
S. Seetharaman et al., "Modelling of Metallurgical Reactions Towards Process Simulations," i 6th Japan-Nordic Countries Joint Symposium, 2000.
[466]
L. Jonsson et al., "Process Models for Ladle Refining - A FundamentalApproach," i 6th Japan-Nordic Countries Joint Symposium, 2000, s. 77-84.
[467]
D. Sheng et al., "Recent Efforts in Sweden to Study InclusionCharacteristics During Ladle Refining," i ISBN91-7170-606-2, Trita Met 85 June 2000, 2000.
[468]
M. Andersson et al., "Slag/metal reactionsduring ladle treatment with focus on desulphurisation," i 6thInternational Conference on Molten Slags, Fluxes and Salts, 2000.
[469]
J. Alexis, L. Jonsson och P. Jönsson, "Heat and fluid-flow models for stirring conditionsin ladle furnaces and their practical implications in secondary refiningoperations," i Clean Steel 5, Vol 1, 2-4 June 1997, Balatonszeplak,Hungary, 1997, s. 49-58.
Icke refereegranskade
Artiklar
[470]
W. Wei et al., "Energy Consumption and Greenhouse Gas Emissions of High-Carbon Ferrochrome Production," JOM : The Member Journal of TMS, vol. 75, no. 4, s. 1206-1220, 2023.
[471]
W. Wei et al., "Numerical Analysis of Fluid Flow and Temperature Distributions of O2/N2 Gas Mixtures in AOD Nozzles," ISIJ International, vol. 63, no. 2, s. 319-329, 2023.
[472]
F. Persson, C. Hulme-Smith och P. G. Jönsson, "Particle morphology of water atomised iron-carbon powders," Powder Technology, vol. 397, s. 116993, 2022.
[473]
J. Yin et al., "Numerical study on the influence of the filling angle on the fluid flow during the ingot side teeming process," Steel Research International, vol. 92, no. 10, 2021.
[474]
C. Chen et al., "A Mathematical Modeling Study of the Influence of Small Amounts of KCl Solution Tracers on Mixing in Water and its Residence Time Distribution in a Continuous Flow Reactor-Metallurgical Tundish," Chemical Engineering Science, vol. 137, s. 914-937, 2015.
[475]
A. J. B. Muwanguzi et al., "Investigation of direct reduction of lumps from natural hematite iron ore," Research and Application of Material, 2013.
[476]
P. Jönsson et al., "The Seetharaman Seminar June 14-15, 2010 in Stockholm, Sweden," High Temperature Materials and Processes, vol. 31, no. 3, s. 193-193, 2012.
[477]
S. Mostafaee och P. Jönsson, "Influence of slag properties on the amount of solid precipitates in high-chromium EAF steelmaking," Steel Grips - Journal of Steel and Related Materials, vol. 9, s. 355-359, 2011.
[478]
R. E. Aune och P. Jönsson, "The Seetharaman Seminar June 14-15, 2010 in Stockholm, Sweden : Materials Processing Towards Properties," Steel Research International, vol. 81, no. 10, s. 811, 2010.
Konferensbidrag
[479]
P. Ternstedt et al., "Using an AOD simulator workbench to support process control development," i METEC InSteelCon 2011, Düsseldorf, Germany, 27 June - 1 July, 2011, 2011.
[480]
P. Ternstedt et al., "Physical Modeling of Side-Blown Converters," i Proc. InternationalConference on Advanced Fluid/Solid Science and Technologyin Experimental Mechanics, Sapporo, Japan, Sept. 11-14, 2006, 2006.
[481]
T. Hansén et al., "On the assessment of macro inclusions in stainless steels using ultrasonic technique.," i The 16th World Conference on Nondestructive Testing, Montreal, Canada, August 30-September 3, 2004, 2004.
Rapporter
[482]
[483]
Z. Tan, M. Ersson och P. G. Jönsson, "Plant Trials with Utilization of Swirl Blades at Scana Steel," , Rapport Jernkontoret, T024-183, 2012.
[484]
S. Mostafaee, M. Andersson och P. Jönsson, "Evaluation of the foamability of the EAF stainless steelmaking slags using computational thermodynamics and thermophysics," Stockholm : KTH Royal Institute of Technology, 2011.
[485]
K. J. Malmberg et al., "High temperature in-situ observations of variour oxide inclusion agglomerations," Stockholm : KTH Royal Institute of Technology, 2011.
[486]
K. J. Malmberg et al., "Observation of inclusion behavior at a solid/liquid interface in a solidifying low carbon steel," Stockholm : KTH Royal Institute of Technology, 2011.
[487]
[488]
O. Ericsson et al., "Dispersion of non-metallic inclusions in industrial samples taken from liquid stainless steel during ladle treatment," Stockholm : KTH, 2010.
[489]
J. Janis et al., "Dissolution of Nitrides and Precipitation of an AusteniticPhase on the Surface of Fe-20%Cr alloys," Stockholm : KTH, KTH/MSE, 1015, 2010.
[490]
J. Janis, et al., "Effect of Primary and Secondary Particles on Grain Sizein a Fe-20mass% Cr Alloy Deoxidised with Ti and Zr," Stockholm : KTH, KTH/MSE, 10:14, 2010.
[491]
J. Janis et al., "Effects of Nitride-Oxide Particles on Solidified Structure inFe-20mass%Cr Alloy Deoxidised with Ti/M (M = Zr or Ce)," Stockholm : KTH, KTH/MSE, 10:13, 2010.
Övriga
[492]
[493]
F. Persson, P. G. Jönsson och A. Eliasson, "Influence of liquid metal properties for water atomised metal powders," (Manuskript).
[494]
L. Hallgren et al., "Use of a Swirl Blade in Productio of Ingots with Focus on the Influence on the Red-Eye Diameter," (Manuskript).
[495]
H. Doostmohammadi et al., "Thermodynamic and Experimental Considerations of the Inclusion Characteristics during Vacuum Degassing of Tool Steel," (Manuskript).
[496]
[497]
S. Akbarnejad, D. Sheng och P. G. Jönsson, "A Computational Fluid Dynamics Study on Physical Refining of Steel Melts by Filtration," (Manuskript).
[498]
[499]
[500]
A. Gauffin et al., "A novel methodology of dynamic material flow modelling : Part 2. The societal steel scrap reserve and amounts of losses ," (Manuskript).
[501]
L. Hailong et al., "A simulation study of particles generated from pellet wear contacts during a laboratory test," (Manuskript).
[502]
H. Liu, L. Jonsson och P. Jönsson, "A study of influencing factors on the particle concentration and deposition in a model room with a coupled drift flux and Eulerian deposition model," (Manuskript).
[503]
J. Wang, P. . G. Jönsson och Z. Zhao, "A study of the photocatalytic N-de-ethylation and chromophore cleavage of RhB over four different g-C3N4 based phtocatalysts," (Manuskript).
[504]
A. Dahlin och P. G. Jönsson, "A theoretical study of the effect of ladle-slag additions on the BOF process," (Manuskript).
[505]
[506]
W. Wei, P. Samuelsson och P. Jönsson, "Alloy Design Optimization of Stainless Steel’s Performance and Environmental Impactthrough Taguchi based Grey Relational Analysis," (Manuskript).
[507]
Y. Xu, M. Ersson och P. Jönsson, "An Experimental and Mathematical Study of Bubble Formations in a Molten Steel Bath," (Manuskript).
[508]
Z. Zhang et al., "An Experimental and Numerical Study of theFilling of a Steel Sampler," (Manuskript).
[509]
S. Akbarnejad et al., "Analysis on Experimental Investigation and Mathematical Modelling of Incompressible Flow through Ceramic Foam Filters," (Manuskript).
[510]
C. Chen et al., "Application of a Unified Eulerian Model to Study the Inclusions Deposition at a Steel-Slag Interface in a Tundish," (Manuskript).
[511]
A. J. B. Muwanguzi et al., "Application of different models for the prediction of the kinetics of direct reduction of natural iron ores," (Manuskript).
[512]
D. Janis et al., "Application of the PDA/OES method during Production of Duplex Stainless Steel," (Manuskript).
[513]
C. Xuan, A. V. Karasev och P. G. Jönsson, "Attraction Force Estimations of Al2O3Agglomerationsin the Melt," (Manuskript).
[514]
J. Bu, P. G. Jönsson och Z. Zhao, "BaZr0.5Ce0.3Ln0.2O3-δ(Ln=Y, Sm, Gd, Dy) based electrolytes used for intermediate temperature solid oxide fuel cells," (Manuskript).
[515]
M. Nabeel et al., "Characterization of dust generated during mechanical wear of partially reduced iron ore pellets," (Manuskript).
[516]
[517]
J. Wang et al., "Construction of heterostructuredg-C3N4/MIL-88A with enhanced photocatalytic activity under visible-light irradiation," (Manuskript).
[518]
Y. Liu et al., "Decarburization in an Electric Arc Furnace using Coupled Fluid dynamics and Thermodynamics," (Manuskript).
[519]
P. Ni et al., "Deposition of Particles in Liquid Flows in Horizontal Straight Channels," (Manuskript).
[520]
J. Svantesson, M. Ersson och P. Jönsson, "Effect of Froude Number on Submerged Gas Blowing Characteristics," (Manuskript).
[521]
H. Kellner et al., "Effect of Stirring Mode on Non-Metallic Inclusions in Alloy 825 during Ladle Treatment," (Manuskript).
[522]
Z. Tan, M. Ersson och P. G. Jönsson, "Effect of TurboSwirl on Steel Cleanliness during Ingot Filling," (Manuskript).
[523]
C. Médioni, P. Jönsson och S. Du, "Effect of a Changed Stirring Practice on the Inclusion Characteristics during Vacuum Degassing in a Ladle," (Manuskript).
[524]
A. F. Yang, A. Karasev och P. G. Jönsson, "Effect of nepheline syenite on iron losses in slags during desulphurization of hot metal," (Manuskript).
[525]
C. Xuan, A. V. Karasev och P. G. Jönsson, "Evaluation of Agglomeration Mechanisms of Non-metallic Inclusions and Cluster Characteristics Produced by Ti/Al Complex Deoxidation in Fe-10 mass%Ni Alloy," (Manuskript).
[526]
S. Guo et al., "Evaluation of the chip breakability after machining of Bearing steels based on Weight Distribution Methods," (Manuskript).
[527]
J. Svensson et al., "Experimental Study of non-metallic inclusions behaviour in the Tundish during Continuous Casting of Steel," (Manuskript).
[528]
M. Swartling et al., "Experimentally determined heat flows in a blast furnace hearth," (Manuskript).
[529]
M. Nabeel, A. Karasev och P. Jönsson, "Extreme Value Distribution of clusters in REM-alloyed stainless steels," (Manuskript).
[530]
Y. Cheng, P. Jösson och Z. Zhao, "Fabrication of large size defect-free domains of 2D colloidal crystal monolayer withassistance of statistical experimental design," (Manuskript).
[531]
W. Mu et al., "Ferrite Formation Dynamics and Microstructures in Inclusion Engineered Steels with Ti2O3 and TiN Additions," (Manuskript).
[532]
M. Nabeel, A. Karasev och P. Jönsson, "Friction forces and mechanical dust generation in an iron ore pellet bed subjected to varied applied loads," (Manuskript).
[533]
[534]
W. Mu et al., "Inclusion and Microstructure Characteristics in Steels with TiN Additions," (Manuskript).
[535]
M. Al-Saadi et al., "Influence of Strain Magnitude on Microstructure, Texture and Mechanical Properties of Alloy 825 during hot-forging," (Manuskript).
[536]
A. J. B. Muwanguzi et al., "Investigation of direct reduction of lumps from natural hematite iron ore," (Manuskript).
[537]
[538]
R. Safavi Nick et al., "Mathematical Modelling of Desulphurisation of Raw Iron by Powder Injection in a Ladle," (Manuskript).
[539]
Y. Xu, M. Ersson och P. Jönsson, "Measurements and Simulations of a Gas-stirred Flow and the Prediction of Inclusion Transport in Ladles," (Manuskript).
[540]
J. Bu et al., "Novel BaZr0.5Ce0.3Y0.2O3-δ based proton conductors prepared by spark plasma sintering," (Manuskript).
[541]
Y. Xu, M. Ersson och P. Jönsson, "Numerical Investigations on Bubble Behavior at a Steel-slag Interface," (Manuskript).
[542]
H. Bai, M. Ersson och P. G. Jönsson, "Numerical Study of the Application for the Divergent Reverse TurboSwirl Nozzle in the Billet Continuous Casting Process," (Manuskript).
[543]
Y. Cheng, P. Jösson och Z. Zhao, "Optimization of synthesizing upright ZnO rod arrays with large diameters through response surface methodology," (Manuskript).
[544]
W. Mu, P. G. Jönsson och K. Nakajima, "Prediction of Intragranular Ferrite Nucleation in Steels with Ti-oxide and TiN Additions," (Manuskript).
[545]
K. Jagodzińska, P. Jönsson och W. Yang, "Pyrolysis and in-line catalytic decomposition of excavated landfill waste to produce carbon nanotubes and hydrogen over Fe- and Ni-based catalysts – Investigation on the catalyst type and process temperature," (Manuskript).
[546]
S. Akbarnejad et al., "Significance of Fluid Bypassing Effect on Darcy and Non-Darcy Permeability Parameters of Ceramic Foam Filters," (Manuskript).
[547]
J. Ekengård, P. Jönsson och M. Andersson, "Slag-metal equilibrium calculations for estimation of oxygen activity in molten steel during ladle treatment," (Manuskript).
[548]
A. Karasev, Y. Bi och P. G. Jönsson, "Statistical Analysis of the Maximum size of Inclusions in Metal Samples," (Manuskript).
[549]
J. Svensson et al., "Studies of New Coating Materials to Prevent Clogging of the Submerged Entry Nozzle (SEN) during Continuous Casting of Steel," (Manuskript).
[550]
J. Svensson et al., "Studies of the Decarburization Phenomena during Heating of Submerged Entry Nozzles (SEN) in Continuous Casting Processes," (Manuskript).
[551]
A. Memarpour, V. Brabie och P. G. Jönsson, "Studies of the glass/silicon powder coating of the commercial submerged entry nozzles respecting clogging of a rare earth metals (REM) alloyed stainless steel," (Manuskript).
[552]
J. Svantesson et al., "Study of Dynamic Refractory Wear by Slags Containing Very High FeO Contents under Steelmaking Conditions," (Manuskript).
[553]
T. Yoshioka et al., "Study of formation behavior of CaO-Al2O3 inclusions in steel melts during an LF process," (Manuskript).
[554]
[555]
[556]
J. Bu, P. G. Jönsson och Z. Zhao, "The effect of NiO on the conductivities of BaZr0.5Ce0.3Y0.2O3-δ based electrolytes," (Manuskript).
[557]
[558]
[559]
J. Bu, P. G. Jönsson och Z. Zhao, "Yttrium doped hafnium oxide Hf0.69Y0.31O2-δ used for solid oxide fuel cell electrolytes and electronic materials," (Manuskript).
Senaste synkning med DiVA:
2024-11-17 00:11:38