Skip to main content
Back to KTH start page

Publication

Journals:

1.        Jafar Mahmoudi, Numerical Simulation of the Nozzle Configuration in Strip Casting Process Journal of Manufacturing ProcessesVolume 77, May 2022, Pages 561-587, https://doi.org/10.1016/j.jmapro.2022.03.035.

2.        Amir Esmael Forouhid, Mohammad Ilkah, Jafar Mahmoudi, Noise pollution contours in metro stations (Case study of Tehran metro), Journal of Measurements in Engineering-  JVE International Ltd. , 2021. Vol. 9, no 4, p. 193-206, DOI: 10.21595/jme.2021.22114 .

3.        Jafar Mahmoudi, SIL analysis of subsea control system components based on a typical OREDA database, Qual Reliab Engng Int. 2021;1-17, WILEY, DOI: 10.1002/qre.2909, wileyonlinelibrary.com/joumal/qre.

4.        Jafar Mahmoudi, A Four-Step Safety lntegrity Level Analysis of Numerous Subsea Control System Components, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, EPTEMBER 2021, Vol. 7 / 031005-1, DOI: 10.1115/1.4051043.

5.        Amir Esmael Forouhid, Amir Falah Zadeh and Jafar Mahmoudi, Modelling and Analysis of an Urban Road Traffic Noise Pollution (Case study of an interrupted flow traffic noise at a signalized intersection), Journal of Applied Engineering Science (JAES), e JAES in 2022, Volume 20 Number 1. , DOI: https://doi.org/10.5937/jaes0-29921

6.        Kourosh Mousavi Takami & Jafar Mahmoudi, (2008) "Design of a New Oil Spraying Device for Hot Spot Cooling in Large Scale Electric Power Transformers," International Journal of Emerging Electric Power Systems: Vol. 9 : Iss. 2, Article 3,

7.        Kourosh Mousavi Takami & Jafar Mahmoudi (2008), Numerical Modelling of Heat Generation and Distribution in the Core and Winding of Power Transformers, International Journal of Emerging Electric Power Systems: Vol. 9: Iss. 2, Article 7,

8.        Jafar Mahmoudi, Mathematical modelling of fluid flow, heat transfer and solidification in a strip continuous casting process, International Journal of Cast Metals Research, IJCMR, 2006 Vol. 2 No. 32.

9.        Jafar Mahmoudi, “Modeling of Fluid flow and heat transfer in a copper Based Heat Sink aopplication” Inter. Jour. of Green Energy, 2006 3: 43-61.

10.     Jafar Mahmoudi, " Horizontal continuous casting study", International Journal of Cast Metals Research, IJCMR, 2005 Vol. 18 No. 4 1

11.     J. Mahmoudi, M. Vynnycky, P. Sivesson and H. Fredriksson, An experimental and numerical study on the modeling of fluid flow, heat transfer and solidification in a copper continuous strip casting process, Mater Trans, JIM, 44 (2003) 1741-1751.

12.     J. Mahmoudi and M. Vynnycky, Modeling of fluid flow, heat transfer and solidification in a strip caster process for copper base alloys, part 1. Fluid flow. Scan. J (Scandinavian Journal of Metallurgy), 30 (2001)21-29.

13.     J. Mahmoudi and M. Vynnycky, Modeling of fluid flow, heat transfer and solidification in a strip caster process for copper base alloys, part 2. Heat transfer. Scan. J (Scandinavian Journal of Metallurgy), 30 (2001)30-40.

14.     J. Mahmoudi, M. Vynnycky and H. Fredriksson, Modeling of fluid flow, heat transfer and solidification in the strip casting of copper base alloy, Part 3. Solidification - a theoretical study, Scan. J (Scandinavian Journal of Metallurgy), 30 (2001)136-145.

15.     J. Mahmoudi and H. Fredriksson, Solidification behavior of rapidly quenched Cu-Sn alloys, Mater. Trans. JIM, 41 (2000) 1575-1582;

16.     J. Mahmoudi and H. Fredriksson, Thermal analysis of Copper-tin alloys during rapid solidification processing, J.Mate. Science (Journal of Materials Science), 35 (2000) 4977-4987.

17.     J. Mahmoudi and H. Fredriksson, Modeling of solidification for copper-base alloys during rapid solidification processing, Mater, Sci. Eng., A226-228 (1997) 22-.

 

Reviewed Conference Papers:

 

1.        Validation of the Open Source OffWind 1 toolkit using the the Lillgrund Wind Farm Data, International Collective on Environment, Culture & Politics, Colorado Univ, USA, May 2014

2.        Introduction to the Offwind tools (Prediction tools for offshore wind energy generation), Part 1, EWEA presentation, Germany, Frankfurt, 2013

3.        OffWindSolver: Wind Farm Optimization tool based on Actuator Line Concept in OpenFoam architecture, International Conference on Future Technologies for Wind Energy: October 7-9, 2013 in Laramie, Wyoming

4.        Kourosh Mousavi, Mahmoudi J., " Optimization of a H2O/CO2 Condenser for capture of CO2 using Robust Simulation Software", 6th Vienna International Conference on Mathematical Modelling (MATHMOD), Vienna, Feb, 2009.

5.        Nabati H., Mahmoudi J., " Flue Condenser Modelling for Improving the CO2 Capturing Efficiency", 6th Vienna International Conference on Mathematical Modelling (MATHMOD), Vienna, Feb, 2009.

6.        Mohammad Tabatabaee & Jafar Mahmoudi, FEM method simulation of Aluminium - iron - copper bonding using explosive welding method, The 17th IASTED International Conference on applied Simulation and Modelling, ASM 2008,

7.        Kourosh Mousavi, Mahmoudi J., " A simulated H2O/CO2 Condenser for Oxy-fuel CO2 Capture process", 9th International Conference on Greenhouse Gas Control Technologies, Washington DC, November 2008.

8.        Kourosh Mousavi Takami & Jafar Mahmoudi, “Evaluation of Large Power Transformer Losses for greenhouse gas and final cost reductions, IGEC III conference, June 2007, Sweden, ISBN 978-91-85485-52-9.

9.        Kourosh Mousavi Takami & Jafar Mahmoudi, “Heat generation and Distribution in core and winding of power transformers”, 3rd international green energy conference, June 2007, Sweden, ISBN 978-91-85485-52-9. www.igec.info.

10.     Kourosh Mousavi Takami & Jafar Mahmoudi, “A novel device (oil spraying system) for local cooling of hot spot and high temperature areas in power transformer", international IGEC III conference, June 2007, Sweden. www.igec.info, ISBN 978-91-85485-52-9.

11.     Kourosh Mousavi Takami & Jafar Mahmoudi, `` Mitigation and cure of hot spot problem with a new apparatus in large power transformers and analyzing by Ants algorithm ´´, published in IEEE conference, Johannesburg- Southern Africa, ISBN: 1-4244-1478-4/07- 2007 IEEE,

12.     Kourosh Mousavi Takami & Jafar Mahmoudi, Manufacturing and simulation of a novel copper heat Sink with copper pipe for heat removing in CPU, IEEE/ ICEPT2007 Conference, Shanghai- China, 1-4244-1392-3/07,

13.     Kourosh Mousavi Takami & Jafar Mahmoudi, A novel apparatus planning for hot spot temperature removing in power transformers, August 29 – 31, 2007 Palma de Mallorca, Spain

14.     Kourosh Mousavi Takami & Jafar Mahmoudi, Identification of the best thermal formula and model for oil and winding of large scale power transformers using prediction methods, SIMS 2007, Sweden, (print): 1650-3686,

15.     Kourosh Mousavi Takami & Jafar Mahmoudi, A new approach for hot spot cooling in power transformers using pigtail nozzle, 8th International Power Engineering Conference, IPEC2007, IEEE Conference, 3-6 December 2007, Singapore.

16.     Kourosh Mousavi Takami & Jafar Mahmoudi, High power super electrical heater reflectors usable in electrical furnaces Simulation and optimization for power loss, PSC (Power system Conference), Tehran, 46-E-ECM-107, 2007, ref. 1075/3410,

17.     Nicolas Rios and Jafar Mahmoudi, Modeling of the Heat Transfer in an Industrial Batch Furnace, IGEC-III (2007), 18-20, Vasteras, Sweden

18.     Kourosh Mousavi Takami , Hassan Gholinejad & Jafar Mahmoudi, “Thermal and hot spot evaluations on oil immersed power Transformers by FEMLAB and MATLAB software’s " EuroSime 2007, 16 April 2007, London, 1-4244-1106-8/07/2007 IEEE,

19.     Sohrab Firozifar, H. Gholinejad and J. Mahmoudi, Over load problem in a transformer in Mazandaran state, SIMS 47 (2006).

20.     Nabati H., Mahmoudi J., "Optimal Pin Fin Heat Exchanger Surface for Pulp and Paper Industry", the Fifth International IMACS Symposium on Mathematical Modelling (5th MATHMOD), February 8 – 10, Vienna University of Technology, Vienna, Austria, 2006.

21.     Bijan Karimpourian and Jafar Mahmoudi, A Review to Electronic Cooling Device, 2004, Proceedings EuroSim, April 18-20, Berlin (2005), Germany,

22.     A. T. Targhi and J. Mahmoudi, Modelling of Flow Field and Heat Transfer in Copper Base Automotive Heat Exchanger Proceedings SIMS 46 (2005), Norway.

23.     Bijan Karimpourian and Jafar Mahmoudi, Experimental determination of the thermal performance of a free-standing fins, Proceeding SIMS 46 (2005), Norway.

24.     Nabati H., Mahmoudi J., "Numerical Study of Thermal Performance of Different Pin-Fin Morphologies", 46th Conference on Simulation and Modelling (SIMS 2005), Trondheim, Norway, 2005.

25.     J. Mahmoudi, Modelling of fluid flow and heat transfer in a copper base heat sink application, Proceedings EuroSim, April 18-20, Berlin (2005), Germany,

26.     Mahmoudi, The principle of HCC. The 3rd inte. conference on casting technology (1995), Tehran. Iran.

27.     Jafar Mahmoudi, Richard Nipple and Per-Erik Sandberg, Modeling of Flow field and Heat Transfer in a Copper Brazed Automotive Radiators Application Part 1: Design for flow and heat transfer studies of louvered fins, IWREC Conference, (2003), Tehran.

28.     J. Mahmoudi, M. Vynnycky and H. Fredriksson, Thermal modeling of the copper continuous strip casting process, Euromat, 27-30 September (1999), Munich.

29.     Jafar Mahmoudi, Jussi Vaarno, Copper Heat Sink Design; A Practical Application of Mathematical Modeling, Presented at SIMS 45, Västerås, Sweden (2003), P: 1-44

30.     J. Mahmoudi and H. Fredriksson, Modeling of solidification for copper-base alloys during rapid solidification processing (1997), Ninth International Conference on Rapidly Quenched and Metastable Materials. (RQ9), Slovakia.

31.     J. Mahmoudi, Mechanical properties of Ni-SiC electroless coating on the Al base material. The 1st inte. conference on surface physics (1992), Isfahan. Iran.

 

Reviewed and Approved Industrial Project reports:

 

1.        Jafar Mahmoudi et al, Introduction to Offwind tool, Prediction tools for offshore wind energy generation, Part 1, Nordic Research, Oslo, 2014, P: 1-235, DVD

2.        Jafar Mahmoudi, art 2, Offwind Software Development Technical report, Part 2, Nordic Research, 2014, P2: 1-87, DVD

3.        Jafar Mahmoudi, Part 3, Offwind Code, Part 2, Nordic Research, 2014, P3: 1-345, DVD.

4.        Jafar Mahmoudi, et al, Advanced Wellbore Transport Modelling, Petromaks II KPN, RCN, Stavanger, Norway, 2013 P 1-56, DVD.

5.        Jafar Mahmoudi, Advanced Wellbore Transport Modelling, Adwell, PETROMAKS2, RCN, Stavanger, Norway, 2013, P: 1-88, DVD.

6.        Jafar Mahmoudi, Cementing Irregular Wellbore Geometries, Adwell, PETROMAKS2, 244577, RCN, Stavanger, Norway, 2013, P: 1-45, DVD.

7.        Jafar Mahmoudi, et al, OREDA® JIP Subsea reliability data for SIL calculations, P7111196, OREDA JIP, Reviewed and approved by OREDA board, June 2011, Oslo, Norway, P: 1-25, DVD.

8.        Jafar Mahmoudi, Initial analysis of available historic SCM reliability data, D138-SA-U-RS-002, OREDA® Aug, 2011, Oslo, Norway, P 1-34, DVD

9.        Jafar Mahmoudi, Validation of Computational Fluid Dynamics (CFD) in Single Well Geo-Power Solution, IRIS- Statoil Approved Industrial Report, June, 2010, Stavanger, Norway, P: 1-34.

10.     Jafar Mahmoudi, Heat and Mass transfer investigation in Single-well geo-power solution using CFD tool, IRIS- Statoil Report, march, 2010, Stavanger, Norway, P: 1-75.

11.     Jafar Mahmoudi, et al, Thermophysical properties of CO2/H2O mixtures Condensation processes relevant for oxy-fuel cycles, CLIMIT Program nr ES422910 Statoil, Norske Shell, RCN, 2009.

12.     Hamid Nabati and Jafar Mahmoudi, Preparatory Study on Numerical Simulation of Condenser Used in Oxy-fuel Power Plant, IRIS, Norway, Feb, 2009  

13.     Kourosh Mousavi Takami, Örjan Danielsson and Jafar Mahmoudi, Optimization of Kanthal Superthal High Power Reflectors, a research for KANTHAL AB, Hallstahammar, Sweden, Technical report, 2007,

14.     Jafar Mahmoudi and J. Vaarno, Heat transfer in Up-Casting process, Outokumpu Copper (2005), P: 1-25.

15.     Jafar Mahmoudi, Planetry Rolling in Cast and Roll Process, Outokumpu Copper (2005), Modelling of Internal flow of the conform extrusion Process, Outokumpu Copper (2005) P: 1-73.

16.     Jussi Vaarno and Jafar Mahmoudi, Planetry Rolling in Cast and Roll Process, Outokumpu Copper (2005), P: 1-46.

17.     Jafar Mahmoudi, Material Flow in Rodex process (cold extrusion), Outokumpu Copper (2004), P: 1-33.

18.     Jafar Mahmoudi, Quality improvement in Buffalo Rolling process, Outokumpu Copper (2004), P: 1-89.

19.     Bijan Karimpourian and Jafar Mahmoudi, "A Review to Electronic Cooling Device, MdH/IST (2004), ISBN-91-88834-73-5.

20.     Jafar Mahmoudi, Practical Application of the Mathematical Modelling on the Mould design for the next HOT-TOP trials, Outokumpu Copper (2003), P: 1-33.

21.     Jafar Mahmoudi, Nozzle configuration in a Fikap/Vacap project, Outokumpu Copper (2003), P: 1-17.

22.     J. Mahmoudi, Productivity and Quality Improvement of Horizontal Casting Process at Nordic Brass, Part one, Outokumpu Copper, (2003) P: 1-42.

23.     Jafar Mahmoudi, Back ends defect (Bakändesfel) in the extrusion process at Nordic brass, Outokumpu Copper (2002), P: 1-21.

24.     Richard Nipple and Jafar Mahmoudi, Twin-Roll Strip Casting as the Next Generation Casting Machine, Outokumpu Copper (2002), P: 1-46.

25.     Jafar Mahmoudi, The effect of preheating and chamber temperature in material flow in extrusion process, Outokumpu Copper (2002), P: 1-19.

26.     Jafar Mahmoudi, Rodex process for copper and Aluminum, Outokumpu Copper (2002), P: 1-7.

27.     Jafar Mahmoudi, Jussi Vaarno, Copper-base Heat Sink Design for Intel P4_Standard, A Practical Application of Mathematical Modeling, Outokumpu Copper (2002); P: 1-27

28.     Jafar Mahmoudi, Jussi Vaarno, Practical Application of Mathematical Modeling On the Nozzle Configuration in a Strip Casting Process; Part one: An experimental water-modeling study on the inlet nozzle jet design; Outokumpu Copper (2001), P: 1-18 & CD1-5

29.     Jafar Mahmoudi, Jussi Vaarno, Practical Application of Mathematical Modeling On the Nozzle Configuration in a Strip Casting Process; Part two: Mathematical model, as a tool for inlet nozzle jet design; Outokumpu Copper (2001), P:1-54

30.     J. Mahmoudi, P. Sivesson, Mathematical modeling of fluid flow, heat transfer and solidification in a Cu-Cr strip casting process, Outokumpu Copper (2000); P: 1-59

 

Important Note:

  • Please note the Industrial Reports have been reviewed and approved. In particular, the following numbers have been REVIEWD and APPROVED by the second and third external parties (i.e Expert from industrial partner/ client and finally Expert appointed by RCN- Research Council of Norway):

Reports Reviewed and approved by second experts: No. 36, 37, 39, 52, 56

Reports Reviewed and approved by second and third experts: 32, 33, 34, 42, 51, 53, 59, 60, 61

  • Note : Please note the fact that NOT all industrial results have been publishable due to proprietary issues following the company strategy in publication manner. especially when it comes to failure analyse within the Oil and gas industry such as OREDA Association (safety integrity level 2009-2011) and Statoil offshore platform operation (e.g. Advanced Wellbore Transport and Cementing Irregular Wellbore Geometries 2012-2014) as well as patent issues at Outokumpu (Sub merge Nozzle for Strip Casting and Next generation heat sink Design, 2002-2005). Some of those reports has been classified as “Restricted Distribution” as the reports analyse the effect of highly sensitive parameters that had direct impact on the production capacity and consequently the profit of the company.

     


Profile picture of Jafar Mahmoudi

Portfolio

  • Publication