Publikationer av Joachim Claesson

Refereegranskade

Artiklar

[1]

M. L. Fasci et al., "Temperature of energy boreholes accounting for climate change and the built environment - A new model for its estimation," Renewable energy, vol. 202, s. 1479-1496, 2023.

[2]

M. L. Fasci et al., "Simulation of thermal influence between independent geothermal boreholes in densely populated areas," Applied Thermal Engineering, vol. 196, 2021.

[3]

M. L. Fasci et al., "Analysis of the thermal interference between ground source heat pump systems in dense neighborhoods," Science and Technology for the Built Environment, vol. 25, no. 8, s. 1069-1080, 2019.

[4]

J. Wallin och J. Claesson, "Analyzing the efficiency of a heat pump assisted drain water heat recovery system that uses a vertical inline heat exchanger," Sustainable Energy Technologies and Assessments, vol. 8, s. 109-119, 2014.

[5]

J. Wallin och J. Claesson, "Improving heat recovery using retrofitted heat pump in air handling unit with energy wheel," Applied Thermal Engineering, vol. 62, no. 2, s. 823-829, 2014.

[6]

J. Wallin och J. Claesson, "Investigating the Efficiency of a Vertical Inline Drain Water Heat Recovery Heat Exchanger in a System Boosted with a Heat Pump," Energy and Buildings, vol. 80, s. 7-16, 2014.

[7]

H. Madani, J. Claesson och P. lundqvist, "A descriptive and comparative analysis of three common control techniques for an on/off controlled Ground Source Heat Pump (GSHP) system," Energy and Buildings, vol. 65, s. 1-9, 2013.

[8]

J. Wallin, H. Madani och J. Claesson, "Run-around coil ventilation heat recovery system : A comparative study between different system configurations," Applied Energy, vol. 90, no. 1, s. 258-265, 2012.

[9]

H. Madani Larijani, J. Claesson och P. G. Lundquist, "Capacity control in ground source heat pump systems Part I : modeling and simulation," International journal of refrigeration, vol. 34, no. 6, s. 1338-1347, 2011.

[10]

H. Madani, J. Claesson och P. Lundquist, "Capacity control in ground source heat pump systems part II : Comparative analysis between on/off controlled and variable capacity systems," International journal of refrigeration, vol. 34, no. 8, s. 1934-1942, 2011.

[11]

B. E. Palm och J. Claesson, "Plate heat exchangers : Calculation methods for single-and two-phase flow," Heat Transfer Engineering, vol. 27, no. 4, s. 88-98, 2006.

[12]

J. Claesson, "Correction of Logarithmic Mean Temperature Difference in a compact brazed plate evaporator assuming heat flux governed flow boiling heat transfer coefficient," International journal of refrigeration, vol. 28, no. 4, s. 573-578, 2005.

[13]

J. Claesson, "The influence of brine flow on the flow boiling refrigerant heat transfer coefficient in a compact brazed plate heat exchanger," International Journal of Heat Exchangers, vol. 6, no. 1, s. 35-54, 2005.

Konferensbidrag

[14]

M. L. Fasci et al., "Shallow Geothermal Heat Pumps: a study of the resource potential at a neighbourhood scale.," i ICNTSE 2018, 2018.

[15]

J. Claesson, "Performance Evaluation of Combined Heat Sources for Innovative Heat Pumps : Ground Source Combined With an Air Coil, Paper ID 650," i CLIMA 201311th REHVA World Congress & 8th International Conference on IAQVEC, Prague, Czech Republic, 2013.

[16]

J. Wallin, D. Bastien och J. Claesson, "The influence of energy conservation on the performance of solar thermal systems - A cold country case study," i 1st International Conference On Solar Heating And Cooling For Buildings And Industry (SHC 2012), 2012, s. 1069-1078.

[17]

H. Madani et al., "Experimental Analysis of a Variable Capacity Heat Pump System Focusing on the Compressor and Inverter Loss Behavior," i Proceeding International Refrigeration and Air Conditioning Conference, 2010.

[18]

J. Wallin, H. Madani och J. Claesson, "Run-around coil ventilation heat recovery system : A comparative study between different system configurations," i ICAE 2010 – International conference on Applied energy – Singapore 21‐23 April 2010, 2010.

[19]

H. Madani et al., "The Ground Source Heat Pump : A System Analysis With a Particular Focus on The U-Pipe Borehole Heat Exchanger," i 2010 14th International Heat Transfer Conference, Volume 4, 2010, s. 395-402.

[20]

J. Wallin, H. Madani och J. Claesson, "Ventilation heat recovery with run around coil : System analysis and a study on efficiency improvement – Part I," i ASHRAE Region-At-Large conference. Kuwait. 3-5 October 2009, 2009.

[21]

J. Wallin, H. Madani och J. Claesson, "Ventilation heat recovery with run around coil - System analysis and a study on efficency improvment - Part I," i Ashrae - Symposium on “Sustainability and Green Buildings”, October 5, 2009, KUWAIT, 2009.

[22]

H. Madani, J. Claesson och P. Lundqvist, "Variable capacity heat pump systems, modeling and simulation," i 9th International Energy Agency Heat pump conference, 2008.

[23]

H. Madani, P. Lundqvist och J. Claesson, "Variable capacity heat pumps, modelling and simulation," i IEA Heat Pump conference Proceeding (2008) 9th International Energy Agency Heat Pump Conference, 2008.

[24]

J. Claesson, "Adiabatic two-phase flow hydraulic performance in a compact brazed plate heat exchanger," i Heat SET : Heat Transfer in Components and Systems for Sustainable Energy Technologies, 2007.

[25]

J. Claesson, "Performance of compact brazed plate heat exchanger operating as condenser in domestic heat pump system : An experimental investigation," i International Energy Agency Heat Pump Conference : Global Advances in Heat Pump Technology, Applications, and Markets, 2005.

[26]

B. E. Palm och J. Claesson, "Plate heat exchangers, calculation methods for single- and two-phase flow," i ICMM 2005, Proceedings of the 3rd International Conference on Microchannels and Minichannels, Pt A, 2005, s. 103-113.

[27]

J. Claesson, "Thermal and hydraulic characteristics of brazed plate heat exchangers - Part I : Review of single-phase and two-phase adiabatic and flow boiling characteristics," i ASHRAE Transactions 2005, Vol 111, Pt 1, 2005, s. 822-833.

[28]

J. Claesson, "Thermal and hydraulic characteristics of brazed plate heat exchangers - Part II : Current research on evaporators at KTH," i ASHRAE Transactions 2005, Vol 111, Pt 1, 2005, s. 834-845.

[29]

J. Claesson, M. Afghani och B. Palm, "Influence of large temperature difference in a compact brazed plate evaporator with low overall heat flux," i Eurotherm no. 72: Thermodynamics, Heat and Mass Transfer of Refrigeration machines and heat pumps, 2003, s. 33-37.

[30]

J. Claesson och B. Simanic, "Pressure drop and visualization of adiabatic R134a two-phase flow inside a chevron type plate heat exchanger," i 21st Int. Congr. of Refrigeration, 2003.

[31]

J. Claesson och M. Forsén, "Capacity control of a domestic heat pump : Part 1 – Performance of the heat pump and its components," i IIR/IIF Zero Leakage – Minimum Charge, Efficient Systems for Refrigeration, Air Conditioning and Heat Pumps, 2002, s. 367-376.

[32]

M. Forsén och J. Claesson, "Capacity control of a domestic heat pump : Part 2 System modelling and Simulation," i IIR/IIF Zero Leakage – Minimum Charge, Efficient Systems for Refrigeration, Air Conditioning and Heat Pumps, 2002, s. 377-383.

[33]

J. Claesson och B. Palm, "Discrepancy between calculated and measured superheated area in an evaporator plate heat exchanger," i HEFAT 2002, 1st Int. Conf. on Heat Transfer, Fluid Mechanics and Thermodynamics, 2002, s. 1079-1086.

[34]

J. Claesson och B. Palm, "Boiling mechanism in a small compact brazed plate heat exchanger (CBE) determined by using thermochromic liquid crystals (TLC)," i 20th Int. Congr. of Refrigeration, 1999.

Icke refereegranskade

Artiklar

[35]

J. Claesson och J. Stare, "Bergvärme kombinerat med uteluftkonvektor – Förbättrad SPF i stadsdelar med hög andel bergvärme," KYLA+ Värmepumpar, 2014.

[36]

J. Claesson, "Kombisystem : uthållig uppvärmning av mindre fastigheter," Energi & Miljö, no. 12, s. 68-72, 2008.

[37]

J. Claesson, "Butiken i kyllabbet på IUC har öppnat," ScanRef, no. 4, s. 44-47, 2006.

[38]

J. Claesson och J. Rogstam, "Den fullskaliga testbutiken i miniatyr har öppnat," Kyla+, no. 8, s. 41-43, 2006.

[39]

J. Claesson, "Plattvärmeväxlare som förångare, jämförelse mellan förångare med och utan fördelningsanordning," Kyla, no. 3, s. 41-43, 2002.

Konferensbidrag

[40]

H. Madani, J. Claesson och P. lundqvist, "Retrofitting a variable capacity heat pump to a ventilation heat recovery system : modeling and performance analysis," i International Conference on Applied Energy, 2010.

[41]

H. Madani, J. Wallin och J. Claesson, "Ventilation heat recovery with run around coil : System analysis and a study on efficiency improvement – Part II," i ASHRAE Region-At-Large conference. Kuwait. 3-5 October 2009, 2009.

[42]

J. Claesson, "Local flow boiling experiments with refrigerant R134a in compact brazed plate heat exchanger," i Annual Meeting of Danish Refrigeration Association. Odense, Denmark. March 15 – 16, 2007, 2007.

[43]

J. Claesson och B. Palm, "Performance of a compact brazed plate heat exchanger evaporator run in co-current and counter-current," i 5th International Conference on Boiling Heat Transfer, 2003.

[44]

J. Claesson, B. Palm och O. Pelletier, "On the influence of geometry on evaporation in compact brazed plate heat exchangers," i ICMF-2001 4th International Conference on Multiphase Flow, 2001.

Böcker

[45]

H. Havtun, P. Bohdanowicz och J. Claesson, Sustainable Energy Utilization. Stockholm : KTH Energiteknik, 2021.

[46]

J. Claesson, Thermal Comfort and Indoor Climate. 6. uppl. Stockholm : KTH Energiteknik, 2021.

[47]

J. Claesson, Thermal Comfort and Indoor Climate. 5. uppl. Stockholm : KTH Energiteknik, 2020.

[48]

J. Claesson, Thermal Comfort and Indoor Climate. 4. uppl. Stockholm : KTH Energiteknik, 2019.

[49]

J. Claesson, Thermal Comfort and Indoor Climate. 3. uppl. Stockholm : KTH Energiteknik, 2018.

[50]

J. Claesson, Thermal Comfort and Indoor Climate. 2. uppl. Stockholm : KTH Energiteknik, 2017.

[51]

J. Claesson, Thermal Comfort and Indoor Climate. 1. uppl. Stockholm : KTH Energiteknik, 2016.

Kapitel i böcker

[52]

J. Claesson, "Chapter 2 - Köldmedier," i VVS 2000 TABELLER & DIAGRAM : Kylteknik, Energi- och Miljötekniska Föreningen red., Stockholm : EMTF Förlag, 2016, s. 10-32.

[53]

J. Claesson, "Chapter 5 - Aggregat," i VVS 2000 TABELLER & DIAGRAM : Kylteknik, Energi- och Miljötekniska Föreningen red., Stockholm : EMTF Förlag, 2016, s. 48-52.

[54]

J. Claesson, "Chapter 7 - Energieffektivitet," i VVS 2000 TABELLER & DIAGRAM : Kylteknik, Energi- och Miljötekniska Föreningen red., Stockholm : EMTF Förlag, 2016, s. 59-70.

[55]

J. Claesson, "Chapter 9 – Miljö- och livscykelaspekter," i VVS 2000 TABELLER & DIAGRAM : Kylteknik, Energi- och Miljötekniska Föreningen red., Stockholm : EMTF Förlag, 2016, s. 111-114.